07 SantaFe alignment question
Guest
Posts: n/a
07 SantaFe alignment question
This is the SE model, equipped with P235/60R18 wheels/tires.
The rear wheels have visible negative camber, i.e., the tops of the
wheels are closer together than the bottoms.
Is this situation correct for this vehicle? Are alignment specs
available on line for it?
TIA
The rear wheels have visible negative camber, i.e., the tops of the
wheels are closer together than the bottoms.
Is this situation correct for this vehicle? Are alignment specs
available on line for it?
TIA
Guest
Posts: n/a
Re: 07 SantaFe alignment question
The specification on rear camber is negative 1 degree +/- 1/2 degree.
The shop manual and electrical troubleshooting manual for the 2007 Santa
Fe are already online at www.hmaservice.com. To use the site, you'll need
to register for a free account, and you'll need Internet Explorer.
The shop manual and electrical troubleshooting manual for the 2007 Santa
Fe are already online at www.hmaservice.com. To use the site, you'll need
to register for a free account, and you'll need Internet Explorer.
Guest
Posts: n/a
Re: 07 SantaFe alignment question
hyundaitech wrote:
> The specification on rear camber is negative 1 degree +/- 1/2 degree.
>
> The shop manual and electrical troubleshooting manual for the 2007 Santa
> Fe are already online at www.hmaservice.com. To use the site, you'll need
> to register for a free account, and you'll need Internet Explorer.
>
Many thanks for the prompt reply, and especially for the online reference.
> The specification on rear camber is negative 1 degree +/- 1/2 degree.
>
> The shop manual and electrical troubleshooting manual for the 2007 Santa
> Fe are already online at www.hmaservice.com. To use the site, you'll need
> to register for a free account, and you'll need Internet Explorer.
>
Many thanks for the prompt reply, and especially for the online reference.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)