Mike T.

Hi again,

I'm still trying to get the new CD player headunit installed in my 2000
Elantra Wagon. I ordered and received a harness that I hoped would work, but
I haven't had luck yet. The unit turns on, but nothing shows on the display
and there's no sound. I've tracked down a couple of wiring schematics, but
they don't match what's on the harness in the car. Here's the wiring of the
harness that went into the back of the stock radio...I'll list them with the
angled corners of the connector facing up:

Top row:
-----------
Empty
White
-----------
(no connections here)
-----------
Black
Brown
Green/Black
-----------

Bottom Row:
-----------
Black
Brown
Yellow
-----------
Red/White
Orange
-----------
Orange
White
Green/White
-----------

Does anyone have an *accurate* listing of what these connections are? Also,
is there an issue because I purchased the car in the US and had it shipped
to Europe and that the new headunit is European (ISO connections in the back
of it)? I doubted it, figuring power is power and speakers are speakers (and
the fact that all of it is made in Korea anyway).

Thanks,
Mike

hyundaitech

Here's what I've got:
Pin 1: empty
Pin 2: Black/white - l/r speaker (-)
Pin 3: Red - l/f speaker (-)
Pin 4: Black - r/f speaker (-)
Pin 5: Black/green - r/r speaker (-)
PIn 6: Green/black - Illumination (-)
Pin 7: Black - ground
Pin 8: empty
Pin 9: Yellow - l/f speaker (+)
PIn 10: Red/Black - constant power
PIn 11: Blue/White - Ignition power
Pin 12: Red/Blue - r/f speaker (+)
PIn 13: White - r/r speaker (+)
Pin 14: Green/white - Illumination (+)
Pin 18: Brown - l/r speaker (+)

I'm guessing Pin 18 is a typo and is really supposed to be Pin 8. I
believe this connector has six cavities on top (pins 1-6) and 8 on the
bottom (pins 7-14). I don't think the radio connectors have changed very
much, so when in doubt go by the pin location.

Mike T.

Thanks for the help. I wired everything as listed. Unfortunately, for some
reason, the radio buttons light up, but there's nothing on the display, and
nothing coming through the speakers. I brought the radio back to the store
where I bought it, the guy tested it, and it all works perfectly.

Is it possible that there could be a problem due to the fact that I bought
the car in the US, but the radio was purchased in Germany? (we moved here
and brought the car with us) I was under the assumption that it should still
work because it all is 12v.

hyundaitech

I can't imagine why there'd be a problem with a German stereo. If it's all
12V, then it should work. Start with checking your wiring for power. You
should have power at the two wires indicated (one constant, one switched).
Check for proper ground in your ground wire. If you can manage it, try to
output a portable radio to the speaker wires or look in the trunk and
inside the doors to check the speaker wire colors. They may or may not be
the same as the speakers are all probably in different harnesses than the
radio.

Mike T.

"hyundaitech" <notpublic@not.public.com> schrieb im Newsbeitrag
news:a8f501c646037717b692bb7097900ab6@localhost.ta lkaboutautos.com...
> I can't imagine why there'd be a problem with a German stereo. If it's
all
> 12V, then it should work. Start with checking your wiring for power. You
> should have power at the two wires indicated (one constant, one switched).
> Check for proper ground in your ground wire. If you can manage it, try to
> output a portable radio to the speaker wires or look in the trunk and
> inside the doors to check the speaker wire colors. They may or may not be
> the same as the speakers are all probably in different harnesses than the
> radio.
>

I'll have to pick up a tester Monday. When I pop the old stock radio back
in, though, everything works, which leads me to believe the wiring's ok (but
I'll still test to be sure!). I'm not replacing it because of any defect,
it's just that I wanted a CD player in the car.

Mike T.

"hyundaitech" <notpublic@not.public.com> schrieb im Newsbeitrag
news:a8f501c646037717b692bb7097900ab6@localhost.ta lkaboutautos.com...
> I can't imagine why there'd be a problem with a German stereo. If it's
all
> 12V, then it should work. Start with checking your wiring for power. You
> should have power at the two wires indicated (one constant, one switched).
> Check for proper ground in your ground wire. If you can manage it, try to
> output a portable radio to the speaker wires or look in the trunk and
> inside the doors to check the speaker wire colors. They may or may not be
> the same as the speakers are all probably in different harnesses than the
> radio.
>

Here's something I just noticed: In the back of the stock radio there's a
7.5A fuse. In the back of the new unit, there's a 15A fuse. Could THIS be
the source of my problems? I need to check the fuse panel in the car.

Mike T.

"Mike T." <root@localhost.com> schrieb im Newsbeitrag
news:2ssm9gF1ov0s6U1@uni-berlin.de...
>
> "hyundaitech" <notpublic@not.public.com> schrieb im Newsbeitrag
> news:a8f501c646037717b692bb7097900ab6@localhost.ta lkaboutautos.com...
> > I can't imagine why there'd be a problem with a German stereo. If it's
> all
> > 12V, then it should work. Start with checking your wiring for power.
You
> > should have power at the two wires indicated (one constant, one
switched).
> > Check for proper ground in your ground wire. If you can manage it, try
to
> > output a portable radio to the speaker wires or look in the trunk and
> > inside the doors to check the speaker wire colors. They may or may not
be
> > the same as the speakers are all probably in different harnesses than
the
> > radio.
> >
>
> Here's something I just noticed: In the back of the stock radio there's a
> 7.5A fuse. In the back of the new unit, there's a 15A fuse. Could THIS be
> the source of my problems? I need to check the fuse panel in the car.
>
The fuse in the panel was a 10A. I changed it to a 15A, but nothing changed.
So much for that.

hyundaitech

As long as the fuse isn't blown, that won't be your problem. I didn't
think to mention earlier that once you take the door panels off, you can
disconnect the speakers and test for continuity to see which wire is
which.

Mike T.

"hyundaitech" <notpublic@not.public.com> schrieb im Newsbeitrag
news:aae183103dea53da1b7f682a33daeecd@localhost.ta lkaboutautos.com...
> As long as the fuse isn't blown, that won't be your problem. I didn't
> think to mention earlier that once you take the door panels off, you can
> disconnect the speakers and test for continuity to see which wire is
> which.
>
I don't believe it. I found the problem.

Today I took the car to the shop to deal with a transmission problem. While
I was there, I brought up this problem. Naturally, I plug the new HU in, and
it works!! I go back home to finally finish this nightmare, and it doesn't
work.

Here is where the problem was: The new HU came with a sleeve. You mount the
sleeve to the car, then slide the HU in. However, in my car, there's nothing
back there for the sleeve to grab onto..just 2 screws on each side. So, I
took the 90° angle brackets off the old HU, and mounted them on the new one,
not using the sleeve. Apparently, there's something involving the sleeve and
the clips mounted to the HU that causes it not to work if not connected.

Which leaves me back at square one...trying to figure out how to mount it.

Thanks to everyone for their help in this so far!

Mike