2006 Sonata trunk lift cylinders
09-01-2006, 11:56 AM
#1
Guest
Posts: n/a
2006 Sonata trunk lift cylinders
I was cleaning my Sonata today and noticed something odd with the trunk
lift cylinders. The left cylinder on my car has a plastic shroud over
the bottom of the cylinder to protect the rod where it exits the body of
the gas cylinder (the cylinders are mounted "upside down" with the main
body on top and the rod coming out the bottom). However, the cylinder
on the right side has no such protect shroud, even though the mounting
stud has a groove just like the left side for the shroud to snap into.
Anyone else with an 06 notice this?
Hyundaitech, any idea of this is by design or did they just miss mine
during assembly? The only reason I can see to have it on the left and
not the right is that the left side has the wiring coming up beside the
cylinder so maybe this is to protect the wiring from getting pinched.
Matt
09-01-2006, 04:11 PM
#4
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
I just checked mine, Matt. We have the same car. Shroud's on the left but
NOT the right. You're probably correct about avoiding pinching the wire
bundle.
Tom
"Matt Whiting" <whiting@epix.net> wrote in message
news:kKYJg.880$Db4.117039@news1.epix.net...
>
> I was cleaning my Sonata today and noticed something odd with the trunk
> lift cylinders. The left cylinder on my car has a plastic shroud over the
> bottom of the cylinder to protect the rod where it exits the body of the
> gas cylinder (the cylinders are mounted "upside down" with the main body
> on top and the rod coming out the bottom). However, the cylinder on the
> right side has no such protect shroud, even though the mounting stud has a
> groove just like the left side for the shroud to snap into. Anyone else
> with an 06 notice this?
>
> Hyundaitech, any idea of this is by design or did they just miss mine
> during assembly? The only reason I can see to have it on the left and not
> the right is that the left side has the wiring coming up beside the
> cylinder so maybe this is to protect the wiring from getting pinched.
>
> Matt
NOT the right. You're probably correct about avoiding pinching the wire
bundle.
Tom
"Matt Whiting" <whiting@epix.net> wrote in message
news:kKYJg.880$Db4.117039@news1.epix.net...
>
> I was cleaning my Sonata today and noticed something odd with the trunk
> lift cylinders. The left cylinder on my car has a plastic shroud over the
> bottom of the cylinder to protect the rod where it exits the body of the
> gas cylinder (the cylinders are mounted "upside down" with the main body
> on top and the rod coming out the bottom). However, the cylinder on the
> right side has no such protect shroud, even though the mounting stud has a
> groove just like the left side for the shroud to snap into. Anyone else
> with an 06 notice this?
>
> Hyundaitech, any idea of this is by design or did they just miss mine
> during assembly? The only reason I can see to have it on the left and not
> the right is that the left side has the wiring coming up beside the
> cylinder so maybe this is to protect the wiring from getting pinched.
>
> Matt
09-01-2006, 04:11 PM
#5
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
I just checked mine, Matt. We have the same car. Shroud's on the left but
NOT the right. You're probably correct about avoiding pinching the wire
bundle.
Tom
"Matt Whiting" <whiting@epix.net> wrote in message
news:kKYJg.880$Db4.117039@news1.epix.net...
>
> I was cleaning my Sonata today and noticed something odd with the trunk
> lift cylinders. The left cylinder on my car has a plastic shroud over the
> bottom of the cylinder to protect the rod where it exits the body of the
> gas cylinder (the cylinders are mounted "upside down" with the main body
> on top and the rod coming out the bottom). However, the cylinder on the
> right side has no such protect shroud, even though the mounting stud has a
> groove just like the left side for the shroud to snap into. Anyone else
> with an 06 notice this?
>
> Hyundaitech, any idea of this is by design or did they just miss mine
> during assembly? The only reason I can see to have it on the left and not
> the right is that the left side has the wiring coming up beside the
> cylinder so maybe this is to protect the wiring from getting pinched.
>
> Matt
NOT the right. You're probably correct about avoiding pinching the wire
bundle.
Tom
"Matt Whiting" <whiting@epix.net> wrote in message
news:kKYJg.880$Db4.117039@news1.epix.net...
>
> I was cleaning my Sonata today and noticed something odd with the trunk
> lift cylinders. The left cylinder on my car has a plastic shroud over the
> bottom of the cylinder to protect the rod where it exits the body of the
> gas cylinder (the cylinders are mounted "upside down" with the main body
> on top and the rod coming out the bottom). However, the cylinder on the
> right side has no such protect shroud, even though the mounting stud has a
> groove just like the left side for the shroud to snap into. Anyone else
> with an 06 notice this?
>
> Hyundaitech, any idea of this is by design or did they just miss mine
> during assembly? The only reason I can see to have it on the left and not
> the right is that the left side has the wiring coming up beside the
> cylinder so maybe this is to protect the wiring from getting pinched.
>
> Matt
09-01-2006, 08:21 PM
#6
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
Tom wrote:
> I just checked mine, Matt. We have the same car. Shroud's on the left but
> NOT the right. You're probably correct about avoiding pinching the wire
> bundle.
It must be intentional then as I can't imagine that odds that we'd both
just happen to get a car where they forgot one side. The wires was my
only theory although it seems like the shroud would have made the other
side look better and also protect the exposed piston rod from dirt and such.
Matt
> I just checked mine, Matt. We have the same car. Shroud's on the left but
> NOT the right. You're probably correct about avoiding pinching the wire
> bundle.
It must be intentional then as I can't imagine that odds that we'd both
just happen to get a car where they forgot one side. The wires was my
only theory although it seems like the shroud would have made the other
side look better and also protect the exposed piston rod from dirt and such.
Matt
09-01-2006, 08:21 PM
#7
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
Tom wrote:
> I just checked mine, Matt. We have the same car. Shroud's on the left but
> NOT the right. You're probably correct about avoiding pinching the wire
> bundle.
It must be intentional then as I can't imagine that odds that we'd both
just happen to get a car where they forgot one side. The wires was my
only theory although it seems like the shroud would have made the other
side look better and also protect the exposed piston rod from dirt and such.
Matt
> I just checked mine, Matt. We have the same car. Shroud's on the left but
> NOT the right. You're probably correct about avoiding pinching the wire
> bundle.
It must be intentional then as I can't imagine that odds that we'd both
just happen to get a car where they forgot one side. The wires was my
only theory although it seems like the shroud would have made the other
side look better and also protect the exposed piston rod from dirt and such.
Matt
09-02-2006, 07:10 AM
#8
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
I have a 2006 gls 4cyl with the same setup as Matt
On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
wrote:
>Tom wrote:
>> I just checked mine, Matt. We have the same car. Shroud's on the left but
>> NOT the right. You're probably correct about avoiding pinching the wire
>> bundle.
>
>It must be intentional then as I can't imagine that odds that we'd both
>just happen to get a car where they forgot one side. The wires was my
>only theory although it seems like the shroud would have made the other
>side look better and also protect the exposed piston rod from dirt and such.
>
>Matt
On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
wrote:
>Tom wrote:
>> I just checked mine, Matt. We have the same car. Shroud's on the left but
>> NOT the right. You're probably correct about avoiding pinching the wire
>> bundle.
>
>It must be intentional then as I can't imagine that odds that we'd both
>just happen to get a car where they forgot one side. The wires was my
>only theory although it seems like the shroud would have made the other
>side look better and also protect the exposed piston rod from dirt and such.
>
>Matt
09-02-2006, 07:10 AM
#9
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
I have a 2006 gls 4cyl with the same setup as Matt
On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
wrote:
>Tom wrote:
>> I just checked mine, Matt. We have the same car. Shroud's on the left but
>> NOT the right. You're probably correct about avoiding pinching the wire
>> bundle.
>
>It must be intentional then as I can't imagine that odds that we'd both
>just happen to get a car where they forgot one side. The wires was my
>only theory although it seems like the shroud would have made the other
>side look better and also protect the exposed piston rod from dirt and such.
>
>Matt
On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
wrote:
>Tom wrote:
>> I just checked mine, Matt. We have the same car. Shroud's on the left but
>> NOT the right. You're probably correct about avoiding pinching the wire
>> bundle.
>
>It must be intentional then as I can't imagine that odds that we'd both
>just happen to get a car where they forgot one side. The wires was my
>only theory although it seems like the shroud would have made the other
>side look better and also protect the exposed piston rod from dirt and such.
>
>Matt
09-02-2006, 04:29 PM
#10
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
Hey, everything costs money. Even that flimsy shroud including
installation. I guess the car has many such 'short cuts' to keep the price
so nice.
Tom
<bop@aol.com> wrote in message
news:bjpif2d4rol2ao8qd0jse4360tt117e2m8@4ax.com...
>I have a 2006 gls 4cyl with the same setup as Matt
>
>
> On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
> wrote:
>
>>Tom wrote:
>>> I just checked mine, Matt. We have the same car. Shroud's on the left
>>> but
>>> NOT the right. You're probably correct about avoiding pinching the wire
>>> bundle.
>>
>>It must be intentional then as I can't imagine that odds that we'd both
>>just happen to get a car where they forgot one side. The wires was my
>>only theory although it seems like the shroud would have made the other
>>side look better and also protect the exposed piston rod from dirt and
>>such.
>>
>>Matt
installation. I guess the car has many such 'short cuts' to keep the price
so nice.
Tom
<bop@aol.com> wrote in message
news:bjpif2d4rol2ao8qd0jse4360tt117e2m8@4ax.com...
>I have a 2006 gls 4cyl with the same setup as Matt
>
>
> On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
> wrote:
>
>>Tom wrote:
>>> I just checked mine, Matt. We have the same car. Shroud's on the left
>>> but
>>> NOT the right. You're probably correct about avoiding pinching the wire
>>> bundle.
>>
>>It must be intentional then as I can't imagine that odds that we'd both
>>just happen to get a car where they forgot one side. The wires was my
>>only theory although it seems like the shroud would have made the other
>>side look better and also protect the exposed piston rod from dirt and
>>such.
>>
>>Matt
09-02-2006, 04:29 PM
#11
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
Hey, everything costs money. Even that flimsy shroud including
installation. I guess the car has many such 'short cuts' to keep the price
so nice.
Tom
<bop@aol.com> wrote in message
news:bjpif2d4rol2ao8qd0jse4360tt117e2m8@4ax.com...
>I have a 2006 gls 4cyl with the same setup as Matt
>
>
> On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
> wrote:
>
>>Tom wrote:
>>> I just checked mine, Matt. We have the same car. Shroud's on the left
>>> but
>>> NOT the right. You're probably correct about avoiding pinching the wire
>>> bundle.
>>
>>It must be intentional then as I can't imagine that odds that we'd both
>>just happen to get a car where they forgot one side. The wires was my
>>only theory although it seems like the shroud would have made the other
>>side look better and also protect the exposed piston rod from dirt and
>>such.
>>
>>Matt
installation. I guess the car has many such 'short cuts' to keep the price
so nice.
Tom
<bop@aol.com> wrote in message
news:bjpif2d4rol2ao8qd0jse4360tt117e2m8@4ax.com...
>I have a 2006 gls 4cyl with the same setup as Matt
>
>
> On Sat, 02 Sep 2006 00:21:58 GMT, Matt Whiting <whiting@epix.net>
> wrote:
>
>>Tom wrote:
>>> I just checked mine, Matt. We have the same car. Shroud's on the left
>>> but
>>> NOT the right. You're probably correct about avoiding pinching the wire
>>> bundle.
>>
>>It must be intentional then as I can't imagine that odds that we'd both
>>just happen to get a car where they forgot one side. The wires was my
>>only theory although it seems like the shroud would have made the other
>>side look better and also protect the exposed piston rod from dirt and
>>such.
>>
>>Matt
09-03-2006, 07:20 PM
#12
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
On Sat, 2 Sep 2006 16:29:19 -0400, "Tom" <tjwitman@bellsouth.net>
wrote:
>Hey, everything costs money. Even that flimsy shroud including
>installation. I guess the car has many such 'short cuts' to keep the price
>so nice.
I notice the rubber boots on the wires are real rubber, not cheap
plastic. The gas struts probably cost Hyundai $5 apiece in 10K
quantities, but they're nicer and more expensive than Accord and Camry
trunk hinges.
-
Bob
wrote:
>Hey, everything costs money. Even that flimsy shroud including
>installation. I guess the car has many such 'short cuts' to keep the price
>so nice.
I notice the rubber boots on the wires are real rubber, not cheap
plastic. The gas struts probably cost Hyundai $5 apiece in 10K
quantities, but they're nicer and more expensive than Accord and Camry
trunk hinges.
-
Bob
09-03-2006, 07:20 PM
#13
Guest
Posts: n/a
Re: 2006 Sonata trunk lift cylinders
On Sat, 2 Sep 2006 16:29:19 -0400, "Tom" <tjwitman@bellsouth.net>
wrote:
>Hey, everything costs money. Even that flimsy shroud including
>installation. I guess the car has many such 'short cuts' to keep the price
>so nice.
I notice the rubber boots on the wires are real rubber, not cheap
plastic. The gas struts probably cost Hyundai $5 apiece in 10K
quantities, but they're nicer and more expensive than Accord and Camry
trunk hinges.
-
Bob
wrote:
>Hey, everything costs money. Even that flimsy shroud including
>installation. I guess the car has many such 'short cuts' to keep the price
>so nice.
I notice the rubber boots on the wires are real rubber, not cheap
plastic. The gas struts probably cost Hyundai $5 apiece in 10K
quantities, but they're nicer and more expensive than Accord and Camry
trunk hinges.
-
Bob
Thread
Thread Starter
Forum
Replies
Last Post
Mikey
Hyundai Mailing List
1
08-08-2005 04:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
