'97 Excel Stereo removal
12-12-2005, 01:39 PM
#2
Guest
Posts: n/a
Re: '97 Excel Stereo removal
You'll need to pull the glove box and remove all the cables from the heater
box (one behind the glove box) and two on the (I believe left) side.
Remove the two screws from behind the ashtray and pull the facia out.
Be sure to take the cables loose first. If you don't you will damage them
or your heater control. Try to pull the facia out as squarely as possible.
This will help keep from breaking the retaining tabs. Also, keep on the
lookout for other hidden screws. I believe the two I mentioned are the
only two, but be gentle just in case.
box (one behind the glove box) and two on the (I believe left) side.
Remove the two screws from behind the ashtray and pull the facia out.
Be sure to take the cables loose first. If you don't you will damage them
or your heater control. Try to pull the facia out as squarely as possible.
This will help keep from breaking the retaining tabs. Also, keep on the
lookout for other hidden screws. I believe the two I mentioned are the
only two, but be gentle just in case.
12-12-2005, 01:39 PM
#3
Guest
Posts: n/a
Re: '97 Excel Stereo removal
You'll need to pull the glove box and remove all the cables from the heater
box (one behind the glove box) and two on the (I believe left) side.
Remove the two screws from behind the ashtray and pull the facia out.
Be sure to take the cables loose first. If you don't you will damage them
or your heater control. Try to pull the facia out as squarely as possible.
This will help keep from breaking the retaining tabs. Also, keep on the
lookout for other hidden screws. I believe the two I mentioned are the
only two, but be gentle just in case.
box (one behind the glove box) and two on the (I believe left) side.
Remove the two screws from behind the ashtray and pull the facia out.
Be sure to take the cables loose first. If you don't you will damage them
or your heater control. Try to pull the facia out as squarely as possible.
This will help keep from breaking the retaining tabs. Also, keep on the
lookout for other hidden screws. I believe the two I mentioned are the
only two, but be gentle just in case.
12-13-2005, 03:25 AM
#4
Guest
Posts: n/a
Re: '97 Excel Stereo removal
Great Stuff,
Since it's the daughters/wifes car I really want to avoid the 10lb hammer
method.
Thanks for the help
"hyundaitech" <notpublic@not.public.com> wrote in message
news:9de8ab45d69597769307a7ae118d7400@localhost.ta lkaboutautos.com...
> You'll need to pull the glove box and remove all the cables from the
> heater
> box (one behind the glove box) and two on the (I believe left) side.
> Remove the two screws from behind the ashtray and pull the facia out.
>
> Be sure to take the cables loose first. If you don't you will damage them
> or your heater control. Try to pull the facia out as squarely as
> possible.
> This will help keep from breaking the retaining tabs. Also, keep on the
> lookout for other hidden screws. I believe the two I mentioned are the
> only two, but be gentle just in case.
>
Since it's the daughters/wifes car I really want to avoid the 10lb hammer
method.
Thanks for the help
"hyundaitech" <notpublic@not.public.com> wrote in message
news:9de8ab45d69597769307a7ae118d7400@localhost.ta lkaboutautos.com...
> You'll need to pull the glove box and remove all the cables from the
> heater
> box (one behind the glove box) and two on the (I believe left) side.
> Remove the two screws from behind the ashtray and pull the facia out.
>
> Be sure to take the cables loose first. If you don't you will damage them
> or your heater control. Try to pull the facia out as squarely as
> possible.
> This will help keep from breaking the retaining tabs. Also, keep on the
> lookout for other hidden screws. I believe the two I mentioned are the
> only two, but be gentle just in case.
>
12-13-2005, 03:25 AM
#5
Guest
Posts: n/a
Re: '97 Excel Stereo removal
Great Stuff,
Since it's the daughters/wifes car I really want to avoid the 10lb hammer
method.
Thanks for the help
"hyundaitech" <notpublic@not.public.com> wrote in message
news:9de8ab45d69597769307a7ae118d7400@localhost.ta lkaboutautos.com...
> You'll need to pull the glove box and remove all the cables from the
> heater
> box (one behind the glove box) and two on the (I believe left) side.
> Remove the two screws from behind the ashtray and pull the facia out.
>
> Be sure to take the cables loose first. If you don't you will damage them
> or your heater control. Try to pull the facia out as squarely as
> possible.
> This will help keep from breaking the retaining tabs. Also, keep on the
> lookout for other hidden screws. I believe the two I mentioned are the
> only two, but be gentle just in case.
>
Since it's the daughters/wifes car I really want to avoid the 10lb hammer
method.
Thanks for the help
"hyundaitech" <notpublic@not.public.com> wrote in message
news:9de8ab45d69597769307a7ae118d7400@localhost.ta lkaboutautos.com...
> You'll need to pull the glove box and remove all the cables from the
> heater
> box (one behind the glove box) and two on the (I believe left) side.
> Remove the two screws from behind the ashtray and pull the facia out.
>
> Be sure to take the cables loose first. If you don't you will damage them
> or your heater control. Try to pull the facia out as squarely as
> possible.
> This will help keep from breaking the retaining tabs. Also, keep on the
> lookout for other hidden screws. I believe the two I mentioned are the
> only two, but be gentle just in case.
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
