Greg

Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or should I
take it to a shop?

Thanks for any help... if anyone knows of someone who can help in the
Baltimore Maryland area, please let me know....

Greg

Zotto

"Greg" <vze1o3pf@verizon.net> ha scritto nel messaggio
news:FIjkc.113605$L31.22003@nwrddc01.gnilink.net.. .
> Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or should I
> take it to a shop?
>
The only thing you can do easily is to give a look to fuses and replace that
one you find open.
Else, it is a problem to relay and it need to be replaced.
Another possibility is a short circuit somewhere.

Zotto

hyundaitech

If all the fuses are good, you likely have either a bad hazard switch or a
bad turn signal flasher unit. The flasher is solid state and can't
readily be checked. You're left to see if power travels through the
hazard switch to the flasher unit properly. In most cases where the
hazards and turn signals both don't work, it's the flasher relay. Check
the hazard switch to see if it feels like it moves properly. If so, you
may want to replace the flasher relay. Its cost is probably less than the
diag time to check the system. You should be able to pick one up at any
Hyundai dealer in town. Antwerpen does the most business in Baltimore, so
they're more likely to have one than the others.

Greg

Where is the flasher relay located in the Sonata? Maybe I can buy one and
replace it myself...

Greg


"hyundaitech" <howitsac@nospam.hotmail.com> wrote in message
news:2eb0679619bdad4840ef3afab978b2d5@localhost.ta lkaboutautos.com...
> If all the fuses are good, you likely have either a bad hazard switch or a
> bad turn signal flasher unit. The flasher is solid state and can't
> readily be checked. You're left to see if power travels through the
> hazard switch to the flasher unit properly. In most cases where the
> hazards and turn signals both don't work, it's the flasher relay. Check
> the hazard switch to see if it feels like it moves properly. If so, you
> may want to replace the flasher relay. Its cost is probably less than the
> diag time to check the system. You should be able to pick one up at any
> Hyundai dealer in town. Antwerpen does the most business in Baltimore, so
> they're more likely to have one than the others.
>

hyundaitech

It's in the "passenger compartment relay box" under the left side of the
dash. You'll have to stick your head under the dash and look up to see
it. It will likely be the largest relay there. If you have the new part
ahead of time, this will help you figure things out. To remove, you must
press in the two tabs on either side of the relay and pull out.

Well2do

Hi, I replaced the flasher relay, and still no turn signals. The
hazards worked once, but then stopped working. What would be my next
step?

Thanks in advance.


"Greg" <vze1o3pf@verizon.net> wrote in message news:<FIjkc.113605$L31.22003@nwrddc01.gnilink.net> ...
> Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or should I
> take it to a shop?
>
> Thanks for any help... if anyone knows of someone who can help in the
> Baltimore Maryland area, please let me know....
>
> Greg

NobodyMan

On 8 May 2004 18:12:42 -0700, well2do@netzero.net (Well2do) wrote:

>Hi, I replaced the flasher relay, and still no turn signals. The
>hazards worked once, but then stopped working. What would be my next
>step?
>
>Thanks in advance.
>
>
>"Greg" <vze1o3pf@verizon.net> wrote in message news:<FIjkc.113605$L31.22003@nwrddc01.gnilink.net> ...
>> Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or should I
>> take it to a shop?
>>
>> Thanks for any help... if anyone knows of someone who can help in the
>> Baltimore Maryland area, please let me know....
>>
>> Greg

Replace the fuse.

ED

>On 8 May 2004 18:12:42 -0700, well2do@netzero.net (Well2do) wrote:
>
>>Hi, I replaced the flasher relay, and still no turn signals. The
>>hazards worked once, but then stopped working. What would be my next
>>step?
>>
>>Thanks in advance.
>>
>>
>>"Greg" <vze1o3pf@verizon.net> wrote in message news:<FIjkc.113605$L31.22003@nwrddc01.gnilink.net> ...
>>> Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or should I
>>> take it to a shop?
>>>
>>> Thanks for any help... if anyone knows of someone who can help in the
>>> Baltimore Maryland area, please let me know....
>>>
>>> Greg
>

Checked the bulbs?

Greg

I have already replaced all bulbs, fuses and flasher relay.... Hazards and
turn signals are not working...

Thanks

"ED" <ac5dc@yahoo.com> wrote in message
news:1iot909tbg7b2k5f5782lfkkteqbhi42l0@4ax.com...
>
> >On 8 May 2004 18:12:42 -0700, well2do@netzero.net (Well2do) wrote:
> >
> >>Hi, I replaced the flasher relay, and still no turn signals. The
> >>hazards worked once, but then stopped working. What would be my next
> >>step?
> >>
> >>Thanks in advance.
> >>
> >>
> >>"Greg" <vze1o3pf@verizon.net> wrote in message
news:<FIjkc.113605$L31.22003@nwrddc01.gnilink.net> ...
> >>> Hi, how do I fix / trouble-shoot this problem? Is this a DIYer or
should I
> >>> take it to a shop?
> >>>
> >>> Thanks for any help... if anyone knows of someone who can help in the
> >>> Baltimore Maryland area, please let me know....
> >>>
> >>> Greg
> >
>
> Checked the bulbs?
>