97 Tiburon
#1
Guest
Posts: n/a
97 Tiburon
I am looking at a cylinder head on ebay. My tib has a 1.8 L engine. The head
is from a 99 elantra 2.0 L; the seller says "The only casting numbers on
this head are 10C 2.0L 1.8L". Can anyone tell me if this will fit my car? I
thought that the 1.8 and 2.0 heads were the same. Haven't posted on this
group in long time. Long time ago I had a rotten meat smell in my vents
after leaving hamburger meat in my car, ha ha! Everyone thought I was a
troll but it took couple of years for it to fade.
is from a 99 elantra 2.0 L; the seller says "The only casting numbers on
this head are 10C 2.0L 1.8L". Can anyone tell me if this will fit my car? I
thought that the 1.8 and 2.0 heads were the same. Haven't posted on this
group in long time. Long time ago I had a rotten meat smell in my vents
after leaving hamburger meat in my car, ha ha! Everyone thought I was a
troll but it took couple of years for it to fade.
#2
Guest
Posts: n/a
Re: 97 Tiburon
According to the parts catalog, the 1.8 and 2.0 heads are the same, but
there was a change at 9/10/97 from part # 22100-23000 to 22100-23001.
According to the catalog, the heads are not interchangeable, but it also
doesn't indicate the actual difference between the heads. It could be
important or not.
there was a change at 9/10/97 from part # 22100-23000 to 22100-23001.
According to the catalog, the heads are not interchangeable, but it also
doesn't indicate the actual difference between the heads. It could be
important or not.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)