Mike Marlow

<halatos2000@gmail.com> wrote in message
news:1141746796.552527.124210@j33g2000cwa.googlegr oups.com...
> The pilot bearing is not spinning when the clutch is engaged. It only
> spins when the pedal is depressed.
>

Yes, you are correct Chris. My bad.

--

-Mike-
mmarlowREMOVE@alltel.net

hyundaitech

Ordinarily, that would be sound logic, but Hyundai doesn't use a pilot
bearing. I suppose it could be the input shaft against the crank bushing.
That certainly makes a little more sense than my original idea.

hyundaitech

Ordinarily, that would be sound logic, but Hyundai doesn't use a pilot
bearing. I suppose it could be the input shaft against the crank bushing.
That certainly makes a little more sense than my original idea.

hyundaitech

Ordinarily, that would be sound logic, but Hyundai doesn't use a pilot
bearing. I suppose it could be the input shaft against the crank bushing.
That certainly makes a little more sense than my original idea.

Jody

180.00 and 450.00 cdn $
"Guncho" <cgunter@hotmail.com> wrote in message
news:1141691707.568133.205100@j33g2000cwa.googlegr oups.com...
>
> Jody wrote:
>> just had clutch replaced and when you start the car the clutch makes a
>> screethin sound for about a minute till it warms up a bit.
>> sound goes away when I push the clutch in...
>
> How much did that run you?
>
> Chris
>

Jody

180.00 and 450.00 cdn $
"Guncho" <cgunter@hotmail.com> wrote in message
news:1141691707.568133.205100@j33g2000cwa.googlegr oups.com...
>
> Jody wrote:
>> just had clutch replaced and when you start the car the clutch makes a
>> screethin sound for about a minute till it warms up a bit.
>> sound goes away when I push the clutch in...
>
> How much did that run you?
>
> Chris
>

Jody

180.00 and 450.00 cdn $
"Guncho" <cgunter@hotmail.com> wrote in message
news:1141691707.568133.205100@j33g2000cwa.googlegr oups.com...
>
> Jody wrote:
>> just had clutch replaced and when you start the car the clutch makes a
>> screethin sound for about a minute till it warms up a bit.
>> sound goes away when I push the clutch in...
>
> How much did that run you?
>
> Chris
>

Guncho

Jody wrote:
> 180.00 and 450.00 cdn $

Which one?

Chris

Guncho

Jody wrote:
> 180.00 and 450.00 cdn $

Which one?

Chris

Guncho

Jody wrote:
> 180.00 and 450.00 cdn $

Which one?

Chris

Jody

i have that feeling, i was told to wait a week and see if it changes.
itts been a month.....
"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:9701b$440ce2df$452894e3$12902@ALLTEL.NET...
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:e93bfae8de2504b5ade6c689273d95a4@localhost.ta lkaboutautos.com...
>> Usually, bad throwout bearings act just the opposite-- they make a loud
>> screeching noise when the pedal is depressed. Nonetheless, I'd primarily
>> suspect the throwout bearing, but there are a few possibilities. I'd
>> recommend taking it back to the shop that replaced the clutch.
>>
>
> Sounds more like a pilot bearing to me because as you say - the throw out
> bearing usually acts just the opposite. The pilot bearing will act just
> this way.
>
> --
>
> -Mike-
> mmarlowREMOVE@alltel.net
>
>

Jody

i have that feeling, i was told to wait a week and see if it changes.
itts been a month.....
"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:9701b$440ce2df$452894e3$12902@ALLTEL.NET...
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:e93bfae8de2504b5ade6c689273d95a4@localhost.ta lkaboutautos.com...
>> Usually, bad throwout bearings act just the opposite-- they make a loud
>> screeching noise when the pedal is depressed. Nonetheless, I'd primarily
>> suspect the throwout bearing, but there are a few possibilities. I'd
>> recommend taking it back to the shop that replaced the clutch.
>>
>
> Sounds more like a pilot bearing to me because as you say - the throw out
> bearing usually acts just the opposite. The pilot bearing will act just
> this way.
>
> --
>
> -Mike-
> mmarlowREMOVE@alltel.net
>
>

Jody

i have that feeling, i was told to wait a week and see if it changes.
itts been a month.....
"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:9701b$440ce2df$452894e3$12902@ALLTEL.NET...
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:e93bfae8de2504b5ade6c689273d95a4@localhost.ta lkaboutautos.com...
>> Usually, bad throwout bearings act just the opposite-- they make a loud
>> screeching noise when the pedal is depressed. Nonetheless, I'd primarily
>> suspect the throwout bearing, but there are a few possibilities. I'd
>> recommend taking it back to the shop that replaced the clutch.
>>
>
> Sounds more like a pilot bearing to me because as you say - the throw out
> bearing usually acts just the opposite. The pilot bearing will act just
> this way.
>
> --
>
> -Mike-
> mmarlowREMOVE@alltel.net
>
>

Jody

where is the pilot bearing?
i know in clutch kit there was big roiund plastic looking one i think thats
the clutch release, the other was a metal bearing about size of a large
lifesaver...
they told me the car diddnt need the lil one put in it was fine...
( i wassnt impressed when i was told that when picking up) all new parts
should have wen t in.
so........
since they said thyer diddnt put it in, kinda up to them top refix non?
i assume thyre l;ooking for another blame ;like he mentioned if its because
not a hyun clutch maybye its sound clutch setting in.
thats when i said u did the clutch a month ago, ive done several 8 hrs
drives since.
should be broken in by now...
grrrrrrrr, hes my ex hyun ser manager, now at kia i go there because i
trusted him, and he gives me deals...
lets see now how much longer i trust....
rear brake still squeeks when sitting still or moving when its applied also.
they said thery replaced the cylinder in back and clean/lubed rear brakes.
they why still same eek when brake moves inside, or its smeting in there...


"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:9701b$440ce2df$452894e3$12902@ALLTEL.NET...
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:e93bfae8de2504b5ade6c689273d95a4@localhost.ta lkaboutautos.com...
>> Usually, bad throwout bearings act just the opposite-- they make a loud
>> screeching noise when the pedal is depressed. Nonetheless, I'd primarily
>> suspect the throwout bearing, but there are a few possibilities. I'd
>> recommend taking it back to the shop that replaced the clutch.
>>
>
> Sounds more like a pilot bearing to me because as you say - the throw out
> bearing usually acts just the opposite. The pilot bearing will act just
> this way.
>
> --
>
> -Mike-
> mmarlowREMOVE@alltel.net
>
>

Jody

where is the pilot bearing?
i know in clutch kit there was big roiund plastic looking one i think thats
the clutch release, the other was a metal bearing about size of a large
lifesaver...
they told me the car diddnt need the lil one put in it was fine...
( i wassnt impressed when i was told that when picking up) all new parts
should have wen t in.
so........
since they said thyer diddnt put it in, kinda up to them top refix non?
i assume thyre l;ooking for another blame ;like he mentioned if its because
not a hyun clutch maybye its sound clutch setting in.
thats when i said u did the clutch a month ago, ive done several 8 hrs
drives since.
should be broken in by now...
grrrrrrrr, hes my ex hyun ser manager, now at kia i go there because i
trusted him, and he gives me deals...
lets see now how much longer i trust....
rear brake still squeeks when sitting still or moving when its applied also.
they said thery replaced the cylinder in back and clean/lubed rear brakes.
they why still same eek when brake moves inside, or its smeting in there...


"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:9701b$440ce2df$452894e3$12902@ALLTEL.NET...
>
> "hyundaitech" <notpublic@not.public.com> wrote in message
> news:e93bfae8de2504b5ade6c689273d95a4@localhost.ta lkaboutautos.com...
>> Usually, bad throwout bearings act just the opposite-- they make a loud
>> screeching noise when the pedal is depressed. Nonetheless, I'd primarily
>> suspect the throwout bearing, but there are a few possibilities. I'd
>> recommend taking it back to the shop that replaced the clutch.
>>
>
> Sounds more like a pilot bearing to me because as you say - the throw out
> bearing usually acts just the opposite. The pilot bearing will act just
> this way.
>
> --
>
> -Mike-
> mmarlowREMOVE@alltel.net
>
>