aj

I DON'T KNOW IS THEY STARTED AT THE SAME TIME BUT MY BRAKELIGHTS (TWO
REAR AND UPPER) AND THE CRUISE CONTROL ARE ALL NOT WORKING.
THE FUSES SEEM TO BE FINE AND AFTER CHECKING THE WIRING DIAGRAM AND
SEEING THAT THESE TWO FUNCTIONS ARE ON THE SAME WIRING CIRCUIT, I
REPLACED THE BRAKE SWITCH WHICH IS ACTIVATED BY THE BRAKE PEDAL. STILL
NOTHING. ANY IDEAS?

Matthew Rebbert

AJ,

You can try replacing the light bulbs for the rear brakes. I had an 02
Elantra GT which I had a tail lamp go out and the back 3rd brake light did
not work and cruise control did not work. Replaced bulb and it all worked
again. Might not be it, but its a $1.00 15 minute procedure that might
work.



"aj" <odonnells@usa.com> wrote in message
news:1106688518.334026.144650@z14g2000cwz.googlegr oups.com...
>I DON'T KNOW IS THEY STARTED AT THE SAME TIME BUT MY BRAKELIGHTS (TWO
> REAR AND UPPER) AND THE CRUISE CONTROL ARE ALL NOT WORKING.
> THE FUSES SEEM TO BE FINE AND AFTER CHECKING THE WIRING DIAGRAM AND
> SEEING THAT THESE TWO FUNCTIONS ARE ON THE SAME WIRING CIRCUIT, I
> REPLACED THE BRAKE SWITCH WHICH IS ACTIVATED BY THE BRAKE PEDAL. STILL
> NOTHING. ANY IDEAS?
>