Cheap Place In Canada To Read "Check Engine" Code?
05-08-2006, 09:07 PM
#16
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
On Mon, 08 May 2006 17:29:29 -0400, Lawrence <lmcclaf@sympatico.ca>
wrote:
>After a certain number of "drive cycles" with no problems the light will go
>out. You can disconnect the battery for a couple of minutes to reset the
>computer as well. Just remember to turn off all stuff like fans, radio, etc.
>for the first 10 minutes or so when you first start the car again so the
>computer can relearn the basics again. If you were closer to Trenton I'd say
>just swing by my place and I'll hook my laptop up for you and flick the
>switch. There are a couple of local garages that will do this as well. I don't
>know of any shops off the top of my head in Toronto though.
>
>Cheers,
>Lawrence
>
Is there any laptop interface and software that you can recommend?
wrote:
>After a certain number of "drive cycles" with no problems the light will go
>out. You can disconnect the battery for a couple of minutes to reset the
>computer as well. Just remember to turn off all stuff like fans, radio, etc.
>for the first 10 minutes or so when you first start the car again so the
>computer can relearn the basics again. If you were closer to Trenton I'd say
>just swing by my place and I'll hook my laptop up for you and flick the
>switch. There are a couple of local garages that will do this as well. I don't
>know of any shops off the top of my head in Toronto though.
>
>Cheers,
>Lawrence
>
Is there any laptop interface and software that you can recommend?
05-08-2006, 10:50 PM
#17
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
accent wrote:
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
05-08-2006, 10:50 PM
#18
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
accent wrote:
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
05-08-2006, 10:50 PM
#19
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
accent wrote:
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
> Is there any laptop interface and software that you can recommend?
I have only used one type myself. I got it from here http://www.obd-2.com/
I bought the Ford specific model a few years back and last fall I bought my wife a
2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
use it on that but it works great for the others. I have also used it for friends
(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
particular interface is that you can use it with any computer from a 386 on up. For
a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
simple 75Watt inverter so I can plug the laptop power cord into that and then I can
drive around town or whatever and record all the data from the OBDII into a file on
the hard drive. When I get home I can copy that file to my desktop and replay the
data back on the "digital dashboard" and print out any part of it I want for a hard
copy record of performance. The software for this interface is updated usually once
a month so you just need to go to the web site and you can download the update for
free. I'm not sure of how the price of this unit compares to others but it has
worked flawlessly for me and with my local Ford dealer wanting to charge $67
(Canadian) just to read the codes (this was before a few free places showed up in
this area) the stuff I have done with my interface has already paid for itself
twice over.
Cheers,
Lawrence
05-08-2006, 11:03 PM
#20
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Guncho wrote:
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
05-08-2006, 11:03 PM
#21
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Guncho wrote:
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
05-08-2006, 11:03 PM
#22
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Guncho wrote:
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
> As the light hasn't gone out since Wednesday, I'm thinking it's not the
> gas cap and I should take it in with the light on.
>
> How's Trenton? My father is from there. We had a cottage in Brighton.
>
> Chris
To confirm you still have a problem you could always disconnect the battery to reset
the computer and then see if the light comes back on once you start driving again. I
just realized too that you didn't happen to mention what year the vehicle is so I
might have jumped the gun by automatically thinking OBDII when you might have meant
OBDI or something.
Trenton probably isn't much different from what your Dad could tell you. We just had
the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
the water. I didn't catch anything worth while but I had to work for part of the
weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
didn't get a chance to fish much.
Cheers,
Lawrence
05-09-2006, 10:03 AM
#23
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Lawrence wrote:
> Guncho wrote:
>
> > As the light hasn't gone out since Wednesday, I'm thinking it's not the
> > gas cap and I should take it in with the light on.
> >
> > How's Trenton? My father is from there. We had a cottage in Brighton.
> >
> > Chris
>
> To confirm you still have a problem you could always disconnect the battery to reset
> the computer and then see if the light comes back on once you start driving again. I
> just realized too that you didn't happen to mention what year the vehicle is so I
> might have jumped the gun by automatically thinking OBDII when you might have meant
> OBDI or something.
> Trenton probably isn't much different from what your Dad could tell you. We just had
> the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
> the water. I didn't catch anything worth while but I had to work for part of the
> weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
> didn't get a chance to fish much.
>
> Cheers,
> Lawrence
It's a '99 Accent GSI. Actually the check engine light went off just
as I got to work so I don't need to take it in anymore!
Yeah!
My grandfather was an airplane mechanic on the Trenton airbase. Did
you grow up there or move there for work?
Chris
05-09-2006, 10:03 AM
#24
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Lawrence wrote:
> Guncho wrote:
>
> > As the light hasn't gone out since Wednesday, I'm thinking it's not the
> > gas cap and I should take it in with the light on.
> >
> > How's Trenton? My father is from there. We had a cottage in Brighton.
> >
> > Chris
>
> To confirm you still have a problem you could always disconnect the battery to reset
> the computer and then see if the light comes back on once you start driving again. I
> just realized too that you didn't happen to mention what year the vehicle is so I
> might have jumped the gun by automatically thinking OBDII when you might have meant
> OBDI or something.
> Trenton probably isn't much different from what your Dad could tell you. We just had
> the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
> the water. I didn't catch anything worth while but I had to work for part of the
> weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
> didn't get a chance to fish much.
>
> Cheers,
> Lawrence
It's a '99 Accent GSI. Actually the check engine light went off just
as I got to work so I don't need to take it in anymore!
Yeah!
My grandfather was an airplane mechanic on the Trenton airbase. Did
you grow up there or move there for work?
Chris
05-09-2006, 10:03 AM
#25
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
Lawrence wrote:
> Guncho wrote:
>
> > As the light hasn't gone out since Wednesday, I'm thinking it's not the
> > gas cap and I should take it in with the light on.
> >
> > How's Trenton? My father is from there. We had a cottage in Brighton.
> >
> > Chris
>
> To confirm you still have a problem you could always disconnect the battery to reset
> the computer and then see if the light comes back on once you start driving again. I
> just realized too that you didn't happen to mention what year the vehicle is so I
> might have jumped the gun by automatically thinking OBDII when you might have meant
> OBDI or something.
> Trenton probably isn't much different from what your Dad could tell you. We just had
> the big Walleye/Pike fishing derby this past weekend so it was a bit lively out on
> the water. I didn't catch anything worth while but I had to work for part of the
> weekend (I'm a civilian tech on the Hercules flight simulator on the base here) so I
> didn't get a chance to fish much.
>
> Cheers,
> Lawrence
It's a '99 Accent GSI. Actually the check engine light went off just
as I got to work so I don't need to take it in anymore!
Yeah!
My grandfather was an airplane mechanic on the Trenton airbase. Did
you grow up there or move there for work?
Chris
05-09-2006, 01:55 PM
#26
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
"Lawrence" <lmcclaf@sympatico.ca> wrote in message
news:4460038D.A9EA1DD@sympatico.ca...
> accent wrote:
>
> > Is there any laptop interface and software that you can recommend?
>
> I have only used one type myself. I got it from here http://www.obd-2.com/
> I bought the Ford specific model a few years back and last fall I bought
my wife a
> 2006 Kia Sportage so I needed a new interface so I ordered the triple
combo model.
> My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so
I can't
> use it on that but it works great for the others. I have also used it for
friends
> (Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about
this
> particular interface is that you can use it with any computer from a 386
on up. For
> a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a
486DX4-75
> NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I
picked up a
> simple 75Watt inverter so I can plug the laptop power cord into that and
then I can
> drive around town or whatever and record all the data from the OBDII into
a file on
> the hard drive. When I get home I can copy that file to my desktop and
replay the
> data back on the "digital dashboard" and print out any part of it I want
for a hard
> copy record of performance. The software for this interface is updated
usually once
> a month so you just need to go to the web site and you can download the
update for
> free. I'm not sure of how the price of this unit compares to others but it
has
> worked flawlessly for me and with my local Ford dealer wanting to charge
$67
> (Canadian) just to read the codes (this was before a few free places
showed up in
> this area) the stuff I have done with my interface has already paid for
itself
> twice over.
>
> Cheers,
> Lawrence
here's some info that might be useful
http://autocenter.weber.edu/OBD-CH/vehicleoems.asp
05-09-2006, 01:55 PM
#27
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
"Lawrence" <lmcclaf@sympatico.ca> wrote in message
news:4460038D.A9EA1DD@sympatico.ca...
> accent wrote:
>
> > Is there any laptop interface and software that you can recommend?
>
> I have only used one type myself. I got it from here http://www.obd-2.com/
> I bought the Ford specific model a few years back and last fall I bought
my wife a
> 2006 Kia Sportage so I needed a new interface so I ordered the triple
combo model.
> My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so
I can't
> use it on that but it works great for the others. I have also used it for
friends
> (Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about
this
> particular interface is that you can use it with any computer from a 386
on up. For
> a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a
486DX4-75
> NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I
picked up a
> simple 75Watt inverter so I can plug the laptop power cord into that and
then I can
> drive around town or whatever and record all the data from the OBDII into
a file on
> the hard drive. When I get home I can copy that file to my desktop and
replay the
> data back on the "digital dashboard" and print out any part of it I want
for a hard
> copy record of performance. The software for this interface is updated
usually once
> a month so you just need to go to the web site and you can download the
update for
> free. I'm not sure of how the price of this unit compares to others but it
has
> worked flawlessly for me and with my local Ford dealer wanting to charge
$67
> (Canadian) just to read the codes (this was before a few free places
showed up in
> this area) the stuff I have done with my interface has already paid for
itself
> twice over.
>
> Cheers,
> Lawrence
here's some info that might be useful
http://autocenter.weber.edu/OBD-CH/vehicleoems.asp
05-09-2006, 01:55 PM
#28
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
"Lawrence" <lmcclaf@sympatico.ca> wrote in message
news:4460038D.A9EA1DD@sympatico.ca...
> accent wrote:
>
> > Is there any laptop interface and software that you can recommend?
>
> I have only used one type myself. I got it from here http://www.obd-2.com/
> I bought the Ford specific model a few years back and last fall I bought
my wife a
> 2006 Kia Sportage so I needed a new interface so I ordered the triple
combo model.
> My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so
I can't
> use it on that but it works great for the others. I have also used it for
friends
> (Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about
this
> particular interface is that you can use it with any computer from a 386
on up. For
> a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a
486DX4-75
> NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I
picked up a
> simple 75Watt inverter so I can plug the laptop power cord into that and
then I can
> drive around town or whatever and record all the data from the OBDII into
a file on
> the hard drive. When I get home I can copy that file to my desktop and
replay the
> data back on the "digital dashboard" and print out any part of it I want
for a hard
> copy record of performance. The software for this interface is updated
usually once
> a month so you just need to go to the web site and you can download the
update for
> free. I'm not sure of how the price of this unit compares to others but it
has
> worked flawlessly for me and with my local Ford dealer wanting to charge
$67
> (Canadian) just to read the codes (this was before a few free places
showed up in
> this area) the stuff I have done with my interface has already paid for
itself
> twice over.
>
> Cheers,
> Lawrence
here's some info that might be useful
http://autocenter.weber.edu/OBD-CH/vehicleoems.asp
05-09-2006, 06:51 PM
#29
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
On Mon, 08 May 2006 22:50:53 -0400, Lawrence <lmcclaf@sympatico.ca>
wrote:
>
>I have only used one type myself. I got it from here http://www.obd-2.com/
>I bought the Ford specific model a few years back and last fall I bought my wife a
>2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
>My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
>use it on that but it works great for the others. I have also used it for friends
>(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
>particular interface is that you can use it with any computer from a 386 on up. For
>a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
>NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
>simple 75Watt inverter so I can plug the laptop power cord into that and then I can
>drive around town or whatever and record all the data from the OBDII into a file on
>the hard drive. When I get home I can copy that file to my desktop and replay the
>data back on the "digital dashboard" and print out any part of it I want for a hard
>copy record of performance. The software for this interface is updated usually once
>a month so you just need to go to the web site and you can download the update for
>free. I'm not sure of how the price of this unit compares to others but it has
>worked flawlessly for me and with my local Ford dealer wanting to charge $67
>(Canadian) just to read the codes (this was before a few free places showed up in
>this area) the stuff I have done with my interface has already paid for itself
>twice over.
>
>Cheers,
>Lawrence
>
From what I gather, the hardware I will need is the ISO interface for
my Hyundai Accent 2001. It comes with the 16 pin male connector for
the car, 9 pin female rs232 connector for the computer and a RJ45
cable in between. All this and the software will cost $122 USD.
Too bad the USB option is not supported for ISO, my computer does not
have a serial port.
Thank you for the info.
wrote:
>
>I have only used one type myself. I got it from here http://www.obd-2.com/
>I bought the Ford specific model a few years back and last fall I bought my wife a
>2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
>My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
>use it on that but it works great for the others. I have also used it for friends
>(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
>particular interface is that you can use it with any computer from a 386 on up. For
>a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
>NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
>simple 75Watt inverter so I can plug the laptop power cord into that and then I can
>drive around town or whatever and record all the data from the OBDII into a file on
>the hard drive. When I get home I can copy that file to my desktop and replay the
>data back on the "digital dashboard" and print out any part of it I want for a hard
>copy record of performance. The software for this interface is updated usually once
>a month so you just need to go to the web site and you can download the update for
>free. I'm not sure of how the price of this unit compares to others but it has
>worked flawlessly for me and with my local Ford dealer wanting to charge $67
>(Canadian) just to read the codes (this was before a few free places showed up in
>this area) the stuff I have done with my interface has already paid for itself
>twice over.
>
>Cheers,
>Lawrence
>
From what I gather, the hardware I will need is the ISO interface for
my Hyundai Accent 2001. It comes with the 16 pin male connector for
the car, 9 pin female rs232 connector for the computer and a RJ45
cable in between. All this and the software will cost $122 USD.
Too bad the USB option is not supported for ISO, my computer does not
have a serial port.
Thank you for the info.
05-09-2006, 06:51 PM
#30
Guest
Posts: n/a
Re: Cheap Place In Canada To Read "Check Engine" Code?
On Mon, 08 May 2006 22:50:53 -0400, Lawrence <lmcclaf@sympatico.ca>
wrote:
>
>I have only used one type myself. I got it from here http://www.obd-2.com/
>I bought the Ford specific model a few years back and last fall I bought my wife a
>2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
>My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
>use it on that but it works great for the others. I have also used it for friends
>(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
>particular interface is that you can use it with any computer from a 386 on up. For
>a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
>NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
>simple 75Watt inverter so I can plug the laptop power cord into that and then I can
>drive around town or whatever and record all the data from the OBDII into a file on
>the hard drive. When I get home I can copy that file to my desktop and replay the
>data back on the "digital dashboard" and print out any part of it I want for a hard
>copy record of performance. The software for this interface is updated usually once
>a month so you just need to go to the web site and you can download the update for
>free. I'm not sure of how the price of this unit compares to others but it has
>worked flawlessly for me and with my local Ford dealer wanting to charge $67
>(Canadian) just to read the codes (this was before a few free places showed up in
>this area) the stuff I have done with my interface has already paid for itself
>twice over.
>
>Cheers,
>Lawrence
>
From what I gather, the hardware I will need is the ISO interface for
my Hyundai Accent 2001. It comes with the 16 pin male connector for
the car, 9 pin female rs232 connector for the computer and a RJ45
cable in between. All this and the software will cost $122 USD.
Too bad the USB option is not supported for ISO, my computer does not
have a serial port.
Thank you for the info.
wrote:
>
>I have only used one type myself. I got it from here http://www.obd-2.com/
>I bought the Ford specific model a few years back and last fall I bought my wife a
>2006 Kia Sportage so I needed a new interface so I ordered the triple combo model.
>My sons' Hyundai Scoupe is a 95 so it doesn't have the OBDII interface so I can't
>use it on that but it works great for the others. I have also used it for friends
>(Mazda B4000, Mazda Protege 5, Saturn, and so on). The thing I like about this
>particular interface is that you can use it with any computer from a 386 on up. For
>a while I was using mine with a 40mhz NEC Versa 486 laptop, then with a 486DX4-75
>NEC Versa 2000D laptop, and now I use it with an IBM Thinkpad 600. I picked up a
>simple 75Watt inverter so I can plug the laptop power cord into that and then I can
>drive around town or whatever and record all the data from the OBDII into a file on
>the hard drive. When I get home I can copy that file to my desktop and replay the
>data back on the "digital dashboard" and print out any part of it I want for a hard
>copy record of performance. The software for this interface is updated usually once
>a month so you just need to go to the web site and you can download the update for
>free. I'm not sure of how the price of this unit compares to others but it has
>worked flawlessly for me and with my local Ford dealer wanting to charge $67
>(Canadian) just to read the codes (this was before a few free places showed up in
>this area) the stuff I have done with my interface has already paid for itself
>twice over.
>
>Cheers,
>Lawrence
>
From what I gather, the hardware I will need is the ISO interface for
my Hyundai Accent 2001. It comes with the 16 pin male connector for
the car, 9 pin female rs232 connector for the computer and a RJ45
cable in between. All this and the software will cost $122 USD.
Too bad the USB option is not supported for ISO, my computer does not
have a serial port.
Thank you for the info.