Crank sensor on 2000 Sonata GLS V6
11-26-2005, 07:01 PM
#1
Guest
Posts: n/a
Crank sensor on 2000 Sonata GLS V6
Hello,
Recently, a computer revealed that my crank sensor is not working. My
car exceeded warranty and this job costs about $300, but the part
itself costs just $85.
Does anyone with a knowledge of Hyundai engines know how difficult this
job really is? I know a mechanic in my neighborhood who would charge
less, but I doubt he has much experience with Hyundai... is changing a
crank sensor really complex or fairly simple?
THank you,
Dmitry
Recently, a computer revealed that my crank sensor is not working. My
car exceeded warranty and this job costs about $300, but the part
itself costs just $85.
Does anyone with a knowledge of Hyundai engines know how difficult this
job really is? I know a mechanic in my neighborhood who would charge
less, but I doubt he has much experience with Hyundai... is changing a
crank sensor really complex or fairly simple?
THank you,
Dmitry
11-26-2005, 07:33 PM
#2
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
FYI: the car has 78,000 miles. It recently started getting stuck at
3,000 RPMs (Check Engine was NOT on). I took it to the dealership and
did a transmission fluid change maintenence, and a couple days later
the car is running far worse and the check engine light is on.
3,000 RPMs (Check Engine was NOT on). I took it to the dealership and
did a transmission fluid change maintenence, and a couple days later
the car is running far worse and the check engine light is on.
11-26-2005, 07:33 PM
#3
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
FYI: the car has 78,000 miles. It recently started getting stuck at
3,000 RPMs (Check Engine was NOT on). I took it to the dealership and
did a transmission fluid change maintenence, and a couple days later
the car is running far worse and the check engine light is on.
3,000 RPMs (Check Engine was NOT on). I took it to the dealership and
did a transmission fluid change maintenence, and a couple days later
the car is running far worse and the check engine light is on.
11-26-2005, 10:58 PM
#4
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
Its a very easy repair. The crank sensor is just behind the starter on your
car. Actually quite common to see the wires insulation completely gone.
You can reach the crank without taking the starter out, but I find it much
easier to remove the starter.
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
car. Actually quite common to see the wires insulation completely gone.
You can reach the crank without taking the starter out, but I find it much
easier to remove the starter.
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
11-26-2005, 10:58 PM
#5
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
Its a very easy repair. The crank sensor is just behind the starter on your
car. Actually quite common to see the wires insulation completely gone.
You can reach the crank without taking the starter out, but I find it much
easier to remove the starter.
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
car. Actually quite common to see the wires insulation completely gone.
You can reach the crank without taking the starter out, but I find it much
easier to remove the starter.
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
11-27-2005, 02:14 PM
#8
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
I've seen a bad crank sensor cause a few different problems. Very sluggish
acceleration, no start condition, stalling.
Usually a P1372 Segment time fault code is stored with the P0335 Crank
sensor code.
--
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Advanced Level Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
acceleration, no start condition, stalling.
Usually a P1372 Segment time fault code is stored with the P0335 Crank
sensor code.
--
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Advanced Level Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
11-27-2005, 02:14 PM
#9
Guest
Posts: n/a
Re: Crank sensor on 2000 Sonata GLS V6
I've seen a bad crank sensor cause a few different problems. Very sluggish
acceleration, no start condition, stalling.
Usually a P1372 Segment time fault code is stored with the P0335 Crank
sensor code.
--
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Advanced Level Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
acceleration, no start condition, stalling.
Usually a P1372 Segment time fault code is stored with the P0335 Crank
sensor code.
--
Jerry Lawson
ASE Certified Master Auto Technician
ASE Certified Advanced Level Technician
ASE Certified Undercar Specialist
Hyundai Platinum Technician
Mitsubishi Master Elite Technician
Thread
Thread Starter
Forum
Replies
Last Post
Thee Chicago Wolf
Hyundai Mailing List
1
09-06-2007 12:26 PM
dmitry.malinsky@gmail.com
Hyundai Mailing List
0
11-26-2005 07:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
