Nirodac Yar

Need a blow-up parts diagram for a carb for a 1986 Excel with a Mikuni Corp
carb. Specifically need to know where to reinstall the 1/4 inch steel ball
that fell out on disassembly, and a small "o" ring that also fell out.
(Needed to replace the float)

hyundaitech

Go to www.hmaservice.com. They don't have the manual for the 86 Excel
there, but they have one for an 88, which, if I recall correctly, has a
very similar carburetor.

Select "Service Information", "Web Tech", and then select "Shop" and enter
1988 Excel.

Nirodac Yar

Yup, that's what I needed. Thank-you very much for that lead.
Gotta love the Internet.


"hyundaitech" <howitsac@nospam.hotmail.com> wrote in message
news:332de7e509e4769cd165e82cf8b0aae3@localhost.ta lkaboutautos.com...
> Go to www.hmaservice.com. They don't have the manual for the 86 Excel
> there, but they have one for an 88, which, if I recall correctly, has a
> very similar carburetor.
>
> Select "Service Information", "Web Tech", and then select "Shop" and enter
> 1988 Excel.
>