How to fix glove box latch handle noise?
#16
Guest
Posts: n/a
Re: How to fix glove box latch handle noise?
On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
wrote:
>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>
>
>>in reducing their ability to spring back to a usefull size. If he is
>>crushing them as he stated that is probably what is happening. Same
>>as crushing or stretching a spring.
>
>Ah, I gotcha. Foamed plastics are bad about that.
>
>I've never seen live rubber or Neoprene take much of a set. They usually
>work, even if over compressed.
Agreed, to the point where they splay out, effectively losing height.
That is what I took him to mean by " stoppers that are now crushed".
wrote:
>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>
>
>>in reducing their ability to spring back to a usefull size. If he is
>>crushing them as he stated that is probably what is happening. Same
>>as crushing or stretching a spring.
>
>Ah, I gotcha. Foamed plastics are bad about that.
>
>I've never seen live rubber or Neoprene take much of a set. They usually
>work, even if over compressed.
Agreed, to the point where they splay out, effectively losing height.
That is what I took him to mean by " stoppers that are now crushed".
#17
Guest
Posts: n/a
Re: How to fix glove box latch handle noise?
On 1 Aug 2006 18:47:02 -0500, nothermark <nothermark@not.here> wrote:
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
#18
Guest
Posts: n/a
Re: How to fix glove box latch handle noise?
On 1 Aug 2006 18:47:02 -0500, nothermark <nothermark@not.here> wrote:
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
#19
Guest
Posts: n/a
Re: How to fix glove box latch handle noise?
On 1 Aug 2006 18:47:02 -0500, nothermark <nothermark@not.here> wrote:
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
>On Mon, 31 Jul 2006 21:41:05 -0500, Bob Adkins <bobad@charter.net>
>wrote:
>
>>On 31 Jul 2006 20:02:05 -0500, nothermark <nothermark@not.here> wrote:
>>
>>
>>>in reducing their ability to spring back to a usefull size. If he is
>>>crushing them as he stated that is probably what is happening. Same
>>>as crushing or stretching a spring.
>>
>>Ah, I gotcha. Foamed plastics are bad about that.
>>
>>I've never seen live rubber or Neoprene take much of a set. They usually
>>work, even if over compressed.
>
>Agreed, to the point where they splay out, effectively losing height.
>That is what I took him to mean by " stoppers that are now crushed".
Yes. It is like an egg crate effect. The looseness is not enough to
make the glove box door rattle but the latch has a metal plate inside
that makes a noisy buzz. If I can take the latch apart, I may be able
to put a shim in between the plate.
Filling the void in the foam makes a snug fit and stops the buzz. I
have some neoprene electrical plugs I can cut up and shape but it
seems like such a pain. It is a problem shaping them right and getting
them to stay put when I open and close the glove box.
Thread
Thread Starter
Forum
Replies
Last Post
Thomas G. Marshall
Honda Mailing List
6
09-19-2006 04:11 PM
Thomas G. Marshall
Honda Mailing List
0
09-19-2006 02:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)