Hyundai 'Donut' Wheel/Tire
We have a 'Donut' tire & wheel from our 1998 Sonata, and are quite certain it
will work on other Hyundai's, as well as other cars. Is there any online source that I can check to see what other vehicles this wheel will fit? The bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my interest is I want to sell this on eBay, and would like to make it as appealing to as many bidders as possible. Thanks for your advice. Lee |
Re: Hyundai 'Donut' Wheel/Tire
Cargoman2001 wrote:
> We have a 'Donut' tire & wheel from our 1998 Sonata, and are quite certain it > will work on other Hyundai's, as well as other cars. Is there any online > source that I can check to see what other vehicles this wheel will fit? The > bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my > interest is I want to sell this on eBay, and would like to make it as appealing > to as many bidders as possible. The bolt circle is not measured between adjacent holes, but rather between diagonally opposite holes. It should be 114.5mm. |
Re: Hyundai 'Donut' Wheel/Tire
On a side note.... Everyone should check their spare tire pressure.
I had to change a flat the other day and realized the spare was 20PSI low. I checked the spare in my other Hyundai and found the same result. Luckily we were at come and were able to use a compressor before putting it on the vehicle. |
All times are GMT -4. The time now is 07:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands