Hyundai 'Donut' Wheel/Tire
#1
Guest
Posts: n/a
Hyundai 'Donut' Wheel/Tire
We have a 'Donut' tire & wheel from our 1998 Sonata, and are quite certain it
will work on other Hyundai's, as well as other cars. Is there any online
source that I can check to see what other vehicles this wheel will fit? The
bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my
interest is I want to sell this on eBay, and would like to make it as appealing
to as many bidders as possible.
Thanks for your advice.
Lee
will work on other Hyundai's, as well as other cars. Is there any online
source that I can check to see what other vehicles this wheel will fit? The
bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my
interest is I want to sell this on eBay, and would like to make it as appealing
to as many bidders as possible.
Thanks for your advice.
Lee
#2
Guest
Posts: n/a
Re: Hyundai 'Donut' Wheel/Tire
Cargoman2001 wrote:
> We have a 'Donut' tire & wheel from our 1998 Sonata, and are quite certain it
> will work on other Hyundai's, as well as other cars. Is there any online
> source that I can check to see what other vehicles this wheel will fit? The
> bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my
> interest is I want to sell this on eBay, and would like to make it as appealing
> to as many bidders as possible.
The bolt circle is not measured between adjacent holes, but rather
between diagonally opposite holes. It should be 114.5mm.
> We have a 'Donut' tire & wheel from our 1998 Sonata, and are quite certain it
> will work on other Hyundai's, as well as other cars. Is there any online
> source that I can check to see what other vehicles this wheel will fit? The
> bolt-holes are 3 3/16ths inch (6.8 cm) center-to-center. The reason for my
> interest is I want to sell this on eBay, and would like to make it as appealing
> to as many bidders as possible.
The bolt circle is not measured between adjacent holes, but rather
between diagonally opposite holes. It should be 114.5mm.
#3
Guest
Posts: n/a
Re: Hyundai 'Donut' Wheel/Tire
On a side note.... Everyone should check their spare tire pressure.
I had to change a flat the other day and realized the spare was 20PSI
low. I checked the spare in my other Hyundai and found the same
result. Luckily we were at come and were able to use a compressor
before putting it on the vehicle.
I had to change a flat the other day and realized the spare was 20PSI
low. I checked the spare in my other Hyundai and found the same
result. Luckily we were at come and were able to use a compressor
before putting it on the vehicle.
Thread
Thread Starter
Forum
Replies
Last Post
BEST SHOPPING DEALS
Hyundai Mailing List
0
03-18-2009 07:13 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)