Programming Keyless Remote
Guest
Posts: n/a
Re: Programming Keyless Remote
Turn the ignition on.
Cycle the valet switch 13 times. Press Button I.
You should hear a chirp.
Turn the ignition off and back on.
Cycle the valet switch 14 times. Press Button II.
You should hear two chirps.
Since you're not sure whether you have a valet switch, I'd recommend
finding someone who can access the tsb and print it out for you. It's
very good and has many pictures. It's tsb # 01-90-011.
Cycle the valet switch 13 times. Press Button I.
You should hear a chirp.
Turn the ignition off and back on.
Cycle the valet switch 14 times. Press Button II.
You should hear two chirps.
Since you're not sure whether you have a valet switch, I'd recommend
finding someone who can access the tsb and print it out for you. It's
very good and has many pictures. It's tsb # 01-90-011.
Thread
Thread Starter
Forum
Replies
Last Post
b.t.walter@gmail.com
Honda Mailing List
0
Mar 21, 2006 08:26 PM
Eric Martin
Honda Mailing List
1
Jun 30, 2004 05:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
