Re: Elantra GT remote programming
07-14-2003, 04:24 PM
#1
Guest
Posts: n/a
Re: Elantra GT remote programming
"Lyall Kingman" <king@vei.net> wrote in message news:<beppfl$7uh9n$1@ID-113973.news.uni-berlin.de>...
> Can these remotes only be programmed by a dealer?
> I just got a second unit and the dealer wants $35 for programming.
> On one of my previous cars, a BMW, I had the steps necessary to accomplish
> the programming the remote by going through a series of opening/closing car
> and trunk doors, cycling the ignition switch and pushing remote buttons.
> Does anyone know if these "secret" steps are available for the Elantra.
Look for a white terminal under the dash.
you need to put the ETACS in programming mode first by grounding
the "Set" pin. Connect the two pins on one end of the plug.
Push a button on the remote and do the same with the other
to program 2 remotes.
> Can these remotes only be programmed by a dealer?
> I just got a second unit and the dealer wants $35 for programming.
> On one of my previous cars, a BMW, I had the steps necessary to accomplish
> the programming the remote by going through a series of opening/closing car
> and trunk doors, cycling the ignition switch and pushing remote buttons.
> Does anyone know if these "secret" steps are available for the Elantra.
Look for a white terminal under the dash.
you need to put the ETACS in programming mode first by grounding
the "Set" pin. Connect the two pins on one end of the plug.
Push a button on the remote and do the same with the other
to program 2 remotes.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)