Removing dash to install headunit 94' excel
11-13-2005, 02:04 PM
#1
Guest
Posts: n/a
Removing dash to install headunit 94' excel
Im trying to install a new headunit in my hyundai excel but i cant figure out how to take out the dash. any help
--
ax5961
-----------------------------------------------------------------------
View this thread: http://www.carstalk.net/viewtopic-360118.htm
Send from http://www.carstalk.ne
11-14-2005, 03:48 PM
#3
Guest
Posts: n/a
Re: Removing dash to install headunit 94' excel
hyundaitech wrote:
> It's been quite a while since I've been in one of these. I believe there's
> two screws behind the ash tray and one each behind two of the switch
> blanks.
There are also three screws along the inside top of the instrument
cluster and IIRC, there are some along the bottom of the dash, too. It's
been a while since I last worked on mine, but I remember there being a
lot of screws, definitely more than in my Elantra. Some may have been
hex heads.
> It's been quite a while since I've been in one of these. I believe there's
> two screws behind the ash tray and one each behind two of the switch
> blanks.
There are also three screws along the inside top of the instrument
cluster and IIRC, there are some along the bottom of the dash, too. It's
been a while since I last worked on mine, but I remember there being a
lot of screws, definitely more than in my Elantra. Some may have been
hex heads.
Thread
Thread Starter
Forum
Replies
Last Post
Dwight
Hyundai Mailing List
1
06-24-2004 09:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)