Rotor removal 2003 Elantra
Guest
Posts: n/a
Re: Rotor removal 2003 Elantra
MK wrote:
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
Guest
Posts: n/a
Re: Rotor removal 2003 Elantra
MK wrote:
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
Guest
Posts: n/a
Re: Rotor removal 2003 Elantra
MK wrote:
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
> I am trying to remove the front rotors of a 2003 Elantra. I have
> removed the two phillips head screws and cannot pull the rotors off. Is
> there a puller that I can use or do I just need a bigger hammer?
>
> Thanks,
>
> Mike
>
From personnel experience soak them down with some type of rust
penetrate. Then get the biggest dam sledge you can get into the space
and beat the rotor first front side all around until you see some sign
of movement then give it at tap rear side. Note: Have new rotors on hand
they old ones will look worse for wear and tear. Coat the new rotor with
anti seize and with any luck they will come off easy next time. Major
pain I feel for you.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
