Santa Fe Turbo?
Guest
Posts: n/a
Santa Fe Turbo?
Hi guys
Not really considering this right now, but has anyone done this or something
similar?
The web page is in German, but I've made a rough translation into English
below.
http://www.z-engineering.com/Kit_SantaFe.htm
The first part says that the turbo kit is for the Hyundai Santa Fe 2.7 V6
(which is what I have - smile). The original is 174 PS (is PS = break horse
power?
Sorry, I'm not so technically minded). Anyway, the kit raises the power to
some
230 PS. Nice.
The text says (excuse the bad translation - I only want to give you a rough
idea):
"The turbo compressor kit developed by Z-Engineering and rigirously tested
on the testing stand and under toughest conditions is installed onto the
original engine
with no modification to its mechanical basics. So the power boost is
acheived without such disadvantages as a reduction in the compression ratio
(I'm guessing here...).
Thanks to the unique internal labyrinth oil lubrification system, the
Z-Engineering compressor is entirely indepentdent of the oil system of the
engine, so it is not necessary to drill into the engine's lubrification
system.
This means that it is possible to sell the vehicle and its engine separately
from the
compressor module (as both are not modified by installation).
The compressor is driven by a separate belt whose driving wheel (again,
excuse
my ignorance of the correct terminology) is bolted onto the original belt
wheel.
Due to the high efficiency and the low energy loss gear system of the ZR3
compressor, the turbine rotation of 36'000 rpm already generates a pressure
of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge of
some
55 PS!
Because the rotation speed is comparatively low, and the compressor has its
own separate oil system, it is not afflicted by high operating temperatures.
This also produces relatively cool compressed air compared to conventional
compressor or turbo systems, which translates into higher power gain even
without an intercooler
radiator."
The text then goes on to name the garage where you can have the kit
installed in Switzerland. It also names the price of the kit - some $ 4'500
.. Ouch...
But still - cool mod. Anyone know of anyone who has actually done this? I'd
like
to do it, but only once my warranty has run out, as this would sure as h***
void it,
I guess...
Cheers, D
Not really considering this right now, but has anyone done this or something
similar?
The web page is in German, but I've made a rough translation into English
below.
http://www.z-engineering.com/Kit_SantaFe.htm
The first part says that the turbo kit is for the Hyundai Santa Fe 2.7 V6
(which is what I have - smile). The original is 174 PS (is PS = break horse
power?
Sorry, I'm not so technically minded). Anyway, the kit raises the power to
some
230 PS. Nice.
The text says (excuse the bad translation - I only want to give you a rough
idea):
"The turbo compressor kit developed by Z-Engineering and rigirously tested
on the testing stand and under toughest conditions is installed onto the
original engine
with no modification to its mechanical basics. So the power boost is
acheived without such disadvantages as a reduction in the compression ratio
(I'm guessing here...).
Thanks to the unique internal labyrinth oil lubrification system, the
Z-Engineering compressor is entirely indepentdent of the oil system of the
engine, so it is not necessary to drill into the engine's lubrification
system.
This means that it is possible to sell the vehicle and its engine separately
from the
compressor module (as both are not modified by installation).
The compressor is driven by a separate belt whose driving wheel (again,
excuse
my ignorance of the correct terminology) is bolted onto the original belt
wheel.
Due to the high efficiency and the low energy loss gear system of the ZR3
compressor, the turbine rotation of 36'000 rpm already generates a pressure
of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge of
some
55 PS!
Because the rotation speed is comparatively low, and the compressor has its
own separate oil system, it is not afflicted by high operating temperatures.
This also produces relatively cool compressed air compared to conventional
compressor or turbo systems, which translates into higher power gain even
without an intercooler
radiator."
The text then goes on to name the garage where you can have the kit
installed in Switzerland. It also names the price of the kit - some $ 4'500
.. Ouch...
But still - cool mod. Anyone know of anyone who has actually done this? I'd
like
to do it, but only once my warranty has run out, as this would sure as h***
void it,
I guess...
Cheers, D
Guest
Posts: n/a
Re: Santa Fe Turbo?
10 yrs is a long time to wait. Sounds kewl though.
"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
news:3f54e94b$1@news.swissonline.ch...
> Hi guys
>
> Not really considering this right now, but has anyone done this or
something
> similar?
> The web page is in German, but I've made a rough translation into English
> below.
>
> http://www.z-engineering.com/Kit_SantaFe.htm
>
> The first part says that the turbo kit is for the Hyundai Santa Fe 2.7 V6
> (which is what I have - smile). The original is 174 PS (is PS = break
horse
> power?
> Sorry, I'm not so technically minded). Anyway, the kit raises the power to
> some
> 230 PS. Nice.
> The text says (excuse the bad translation - I only want to give you a
rough
> idea):
> "The turbo compressor kit developed by Z-Engineering and rigirously tested
> on the testing stand and under toughest conditions is installed onto the
> original engine
> with no modification to its mechanical basics. So the power boost is
> acheived without such disadvantages as a reduction in the compression
ratio
> (I'm guessing here...).
> Thanks to the unique internal labyrinth oil lubrification system, the
> Z-Engineering compressor is entirely indepentdent of the oil system of the
> engine, so it is not necessary to drill into the engine's lubrification
> system.
>
> This means that it is possible to sell the vehicle and its engine
separately
> from the
> compressor module (as both are not modified by installation).
> The compressor is driven by a separate belt whose driving wheel (again,
> excuse
> my ignorance of the correct terminology) is bolted onto the original belt
> wheel.
> Due to the high efficiency and the low energy loss gear system of the ZR3
> compressor, the turbine rotation of 36'000 rpm already generates a
pressure
> of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge of
> some
> 55 PS!
>
> Because the rotation speed is comparatively low, and the compressor has
its
> own separate oil system, it is not afflicted by high operating
temperatures.
> This also produces relatively cool compressed air compared to conventional
> compressor or turbo systems, which translates into higher power gain even
> without an intercooler
> radiator."
>
> The text then goes on to name the garage where you can have the kit
> installed in Switzerland. It also names the price of the kit - some $
4'500
> . Ouch...
>
> But still - cool mod. Anyone know of anyone who has actually done this?
I'd
> like
> to do it, but only once my warranty has run out, as this would sure as
h***
> void it,
> I guess...
>
> Cheers, D
>
>
"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
news:3f54e94b$1@news.swissonline.ch...
> Hi guys
>
> Not really considering this right now, but has anyone done this or
something
> similar?
> The web page is in German, but I've made a rough translation into English
> below.
>
> http://www.z-engineering.com/Kit_SantaFe.htm
>
> The first part says that the turbo kit is for the Hyundai Santa Fe 2.7 V6
> (which is what I have - smile). The original is 174 PS (is PS = break
horse
> power?
> Sorry, I'm not so technically minded). Anyway, the kit raises the power to
> some
> 230 PS. Nice.
> The text says (excuse the bad translation - I only want to give you a
rough
> idea):
> "The turbo compressor kit developed by Z-Engineering and rigirously tested
> on the testing stand and under toughest conditions is installed onto the
> original engine
> with no modification to its mechanical basics. So the power boost is
> acheived without such disadvantages as a reduction in the compression
ratio
> (I'm guessing here...).
> Thanks to the unique internal labyrinth oil lubrification system, the
> Z-Engineering compressor is entirely indepentdent of the oil system of the
> engine, so it is not necessary to drill into the engine's lubrification
> system.
>
> This means that it is possible to sell the vehicle and its engine
separately
> from the
> compressor module (as both are not modified by installation).
> The compressor is driven by a separate belt whose driving wheel (again,
> excuse
> my ignorance of the correct terminology) is bolted onto the original belt
> wheel.
> Due to the high efficiency and the low energy loss gear system of the ZR3
> compressor, the turbine rotation of 36'000 rpm already generates a
pressure
> of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge of
> some
> 55 PS!
>
> Because the rotation speed is comparatively low, and the compressor has
its
> own separate oil system, it is not afflicted by high operating
temperatures.
> This also produces relatively cool compressed air compared to conventional
> compressor or turbo systems, which translates into higher power gain even
> without an intercooler
> radiator."
>
> The text then goes on to name the garage where you can have the kit
> installed in Switzerland. It also names the price of the kit - some $
4'500
> . Ouch...
>
> But still - cool mod. Anyone know of anyone who has actually done this?
I'd
> like
> to do it, but only once my warranty has run out, as this would sure as
h***
> void it,
> I guess...
>
> Cheers, D
>
>
Guest
Posts: n/a
Re: Santa Fe Turbo?
:-)
Yeah, well, may not actually wait that long... We only get a three-year
warranty here in Switzerland.
Thinking about it, I think I was wrong to call it a turbo - probably I
should have
translated it as a supercharger, no?
Cheers, D
"Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
news:bj3jgv$6dm$1@bob.news.rcn.net...
> 10 yrs is a long time to wait. Sounds kewl though.
>
> "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
> news:3f54e94b$1@news.swissonline.ch...
> > Hi guys
> >
> > Not really considering this right now, but has anyone done this or
> something
> > similar?
> > The web page is in German, but I've made a rough translation into
English
> > below.
> >
> > http://www.z-engineering.com/Kit_SantaFe.htm
> >
> > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
V6
> > (which is what I have - smile). The original is 174 PS (is PS = break
> horse
> > power?
> > Sorry, I'm not so technically minded). Anyway, the kit raises the power
to
> > some
> > 230 PS. Nice.
> > The text says (excuse the bad translation - I only want to give you a
> rough
> > idea):
> > "The turbo compressor kit developed by Z-Engineering and rigirously
tested
> > on the testing stand and under toughest conditions is installed onto the
> > original engine
> > with no modification to its mechanical basics. So the power boost is
> > acheived without such disadvantages as a reduction in the compression
> ratio
> > (I'm guessing here...).
> > Thanks to the unique internal labyrinth oil lubrification system, the
> > Z-Engineering compressor is entirely indepentdent of the oil system of
the
> > engine, so it is not necessary to drill into the engine's lubrification
> > system.
> >
> > This means that it is possible to sell the vehicle and its engine
> separately
> > from the
> > compressor module (as both are not modified by installation).
> > The compressor is driven by a separate belt whose driving wheel (again,
> > excuse
> > my ignorance of the correct terminology) is bolted onto the original
belt
> > wheel.
> > Due to the high efficiency and the low energy loss gear system of the
ZR3
> > compressor, the turbine rotation of 36'000 rpm already generates a
> pressure
> > of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge
of
> > some
> > 55 PS!
> >
> > Because the rotation speed is comparatively low, and the compressor has
> its
> > own separate oil system, it is not afflicted by high operating
> temperatures.
> > This also produces relatively cool compressed air compared to
conventional
> > compressor or turbo systems, which translates into higher power gain
even
> > without an intercooler
> > radiator."
> >
> > The text then goes on to name the garage where you can have the kit
> > installed in Switzerland. It also names the price of the kit - some $
> 4'500
> > . Ouch...
> >
> > But still - cool mod. Anyone know of anyone who has actually done this?
> I'd
> > like
> > to do it, but only once my warranty has run out, as this would sure as
> h***
> > void it,
> > I guess...
> >
> > Cheers, D
> >
> >
>
>
Yeah, well, may not actually wait that long... We only get a three-year
warranty here in Switzerland.
Thinking about it, I think I was wrong to call it a turbo - probably I
should have
translated it as a supercharger, no?
Cheers, D
"Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
news:bj3jgv$6dm$1@bob.news.rcn.net...
> 10 yrs is a long time to wait. Sounds kewl though.
>
> "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
> news:3f54e94b$1@news.swissonline.ch...
> > Hi guys
> >
> > Not really considering this right now, but has anyone done this or
> something
> > similar?
> > The web page is in German, but I've made a rough translation into
English
> > below.
> >
> > http://www.z-engineering.com/Kit_SantaFe.htm
> >
> > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
V6
> > (which is what I have - smile). The original is 174 PS (is PS = break
> horse
> > power?
> > Sorry, I'm not so technically minded). Anyway, the kit raises the power
to
> > some
> > 230 PS. Nice.
> > The text says (excuse the bad translation - I only want to give you a
> rough
> > idea):
> > "The turbo compressor kit developed by Z-Engineering and rigirously
tested
> > on the testing stand and under toughest conditions is installed onto the
> > original engine
> > with no modification to its mechanical basics. So the power boost is
> > acheived without such disadvantages as a reduction in the compression
> ratio
> > (I'm guessing here...).
> > Thanks to the unique internal labyrinth oil lubrification system, the
> > Z-Engineering compressor is entirely indepentdent of the oil system of
the
> > engine, so it is not necessary to drill into the engine's lubrification
> > system.
> >
> > This means that it is possible to sell the vehicle and its engine
> separately
> > from the
> > compressor module (as both are not modified by installation).
> > The compressor is driven by a separate belt whose driving wheel (again,
> > excuse
> > my ignorance of the correct terminology) is bolted onto the original
belt
> > wheel.
> > Due to the high efficiency and the low energy loss gear system of the
ZR3
> > compressor, the turbine rotation of 36'000 rpm already generates a
> pressure
> > of 0.4 bar (sorry, don't know what htat is in psi...) and a power surge
of
> > some
> > 55 PS!
> >
> > Because the rotation speed is comparatively low, and the compressor has
> its
> > own separate oil system, it is not afflicted by high operating
> temperatures.
> > This also produces relatively cool compressed air compared to
conventional
> > compressor or turbo systems, which translates into higher power gain
even
> > without an intercooler
> > radiator."
> >
> > The text then goes on to name the garage where you can have the kit
> > installed in Switzerland. It also names the price of the kit - some $
> 4'500
> > . Ouch...
> >
> > But still - cool mod. Anyone know of anyone who has actually done this?
> I'd
> > like
> > to do it, but only once my warranty has run out, as this would sure as
> h***
> > void it,
> > I guess...
> >
> > Cheers, D
> >
> >
>
>
Guest
Posts: n/a
Re: Santa Fe Turbo?
Yes, sounds right blower, super-charger.
"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
news:3f556d7b$1@news.swissonline.ch...
> :-)
>
> Yeah, well, may not actually wait that long... We only get a three-year
> warranty here in Switzerland.
>
> Thinking about it, I think I was wrong to call it a turbo - probably I
> should have
> translated it as a supercharger, no?
>
> Cheers, D
>
> "Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
> news:bj3jgv$6dm$1@bob.news.rcn.net...
> > 10 yrs is a long time to wait. Sounds kewl though.
> >
> > "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
> > news:3f54e94b$1@news.swissonline.ch...
> > > Hi guys
> > >
> > > Not really considering this right now, but has anyone done this or
> > something
> > > similar?
> > > The web page is in German, but I've made a rough translation into
> English
> > > below.
> > >
> > > http://www.z-engineering.com/Kit_SantaFe.htm
> > >
> > > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
> V6
> > > (which is what I have - smile). The original is 174 PS (is PS = break
> > horse
> > > power?
> > > Sorry, I'm not so technically minded). Anyway, the kit raises the
power
> to
> > > some
> > > 230 PS. Nice.
> > > The text says (excuse the bad translation - I only want to give you a
> > rough
> > > idea):
> > > "The turbo compressor kit developed by Z-Engineering and rigirously
> tested
> > > on the testing stand and under toughest conditions is installed onto
the
> > > original engine
> > > with no modification to its mechanical basics. So the power boost is
> > > acheived without such disadvantages as a reduction in the compression
> > ratio
> > > (I'm guessing here...).
> > > Thanks to the unique internal labyrinth oil lubrification system, the
> > > Z-Engineering compressor is entirely indepentdent of the oil system of
> the
> > > engine, so it is not necessary to drill into the engine's
lubrification
> > > system.
> > >
> > > This means that it is possible to sell the vehicle and its engine
> > separately
> > > from the
> > > compressor module (as both are not modified by installation).
> > > The compressor is driven by a separate belt whose driving wheel
(again,
> > > excuse
> > > my ignorance of the correct terminology) is bolted onto the original
> belt
> > > wheel.
> > > Due to the high efficiency and the low energy loss gear system of the
> ZR3
> > > compressor, the turbine rotation of 36'000 rpm already generates a
> > pressure
> > > of 0.4 bar (sorry, don't know what htat is in psi...) and a power
surge
> of
> > > some
> > > 55 PS!
> > >
> > > Because the rotation speed is comparatively low, and the compressor
has
> > its
> > > own separate oil system, it is not afflicted by high operating
> > temperatures.
> > > This also produces relatively cool compressed air compared to
> conventional
> > > compressor or turbo systems, which translates into higher power gain
> even
> > > without an intercooler
> > > radiator."
> > >
> > > The text then goes on to name the garage where you can have the kit
> > > installed in Switzerland. It also names the price of the kit - some $
> > 4'500
> > > . Ouch...
> > >
> > > But still - cool mod. Anyone know of anyone who has actually done
this?
> > I'd
> > > like
> > > to do it, but only once my warranty has run out, as this would sure as
> > h***
> > > void it,
> > > I guess...
> > >
> > > Cheers, D
> > >
> > >
> >
> >
>
>
"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
news:3f556d7b$1@news.swissonline.ch...
> :-)
>
> Yeah, well, may not actually wait that long... We only get a three-year
> warranty here in Switzerland.
>
> Thinking about it, I think I was wrong to call it a turbo - probably I
> should have
> translated it as a supercharger, no?
>
> Cheers, D
>
> "Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
> news:bj3jgv$6dm$1@bob.news.rcn.net...
> > 10 yrs is a long time to wait. Sounds kewl though.
> >
> > "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
> > news:3f54e94b$1@news.swissonline.ch...
> > > Hi guys
> > >
> > > Not really considering this right now, but has anyone done this or
> > something
> > > similar?
> > > The web page is in German, but I've made a rough translation into
> English
> > > below.
> > >
> > > http://www.z-engineering.com/Kit_SantaFe.htm
> > >
> > > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
> V6
> > > (which is what I have - smile). The original is 174 PS (is PS = break
> > horse
> > > power?
> > > Sorry, I'm not so technically minded). Anyway, the kit raises the
power
> to
> > > some
> > > 230 PS. Nice.
> > > The text says (excuse the bad translation - I only want to give you a
> > rough
> > > idea):
> > > "The turbo compressor kit developed by Z-Engineering and rigirously
> tested
> > > on the testing stand and under toughest conditions is installed onto
the
> > > original engine
> > > with no modification to its mechanical basics. So the power boost is
> > > acheived without such disadvantages as a reduction in the compression
> > ratio
> > > (I'm guessing here...).
> > > Thanks to the unique internal labyrinth oil lubrification system, the
> > > Z-Engineering compressor is entirely indepentdent of the oil system of
> the
> > > engine, so it is not necessary to drill into the engine's
lubrification
> > > system.
> > >
> > > This means that it is possible to sell the vehicle and its engine
> > separately
> > > from the
> > > compressor module (as both are not modified by installation).
> > > The compressor is driven by a separate belt whose driving wheel
(again,
> > > excuse
> > > my ignorance of the correct terminology) is bolted onto the original
> belt
> > > wheel.
> > > Due to the high efficiency and the low energy loss gear system of the
> ZR3
> > > compressor, the turbine rotation of 36'000 rpm already generates a
> > pressure
> > > of 0.4 bar (sorry, don't know what htat is in psi...) and a power
surge
> of
> > > some
> > > 55 PS!
> > >
> > > Because the rotation speed is comparatively low, and the compressor
has
> > its
> > > own separate oil system, it is not afflicted by high operating
> > temperatures.
> > > This also produces relatively cool compressed air compared to
> conventional
> > > compressor or turbo systems, which translates into higher power gain
> even
> > > without an intercooler
> > > radiator."
> > >
> > > The text then goes on to name the garage where you can have the kit
> > > installed in Switzerland. It also names the price of the kit - some $
> > 4'500
> > > . Ouch...
> > >
> > > But still - cool mod. Anyone know of anyone who has actually done
this?
> > I'd
> > > like
> > > to do it, but only once my warranty has run out, as this would sure as
> > h***
> > > void it,
> > > I guess...
> > >
> > > Cheers, D
> > >
> > >
> >
> >
>
>
Guest
Posts: n/a
Re: Santa Fe Turbo?
For those that don't know, Alpine Developments makes a supercharger
kit for the Delta engine (the 2.7L V6 used in the Sonata, Tiburon,
Santa Fe, and Kia Optima). It will void the factory powertrain
warranty but Alpine will warranty your engine for 3 years (which is
extendable to the full 10 years).
On Wed, 3 Sep 2003 08:54:01 -0400, "Mess" <eatmeraw@noemail.com>
wrote:
>Yes, sounds right blower, super-charger.
>
>"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
>news:3f556d7b$1@news.swissonline.ch...
>> :-)
>>
>> Yeah, well, may not actually wait that long... We only get a three-year
>> warranty here in Switzerland.
>>
>> Thinking about it, I think I was wrong to call it a turbo - probably I
>> should have
>> translated it as a supercharger, no?
>>
>> Cheers, D
>>
>> "Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
>> news:bj3jgv$6dm$1@bob.news.rcn.net...
>> > 10 yrs is a long time to wait. Sounds kewl though.
>> >
>> > "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
>> > news:3f54e94b$1@news.swissonline.ch...
>> > > Hi guys
>> > >
>> > > Not really considering this right now, but has anyone done this or
>> > something
>> > > similar?
>> > > The web page is in German, but I've made a rough translation into
>> English
>> > > below.
>> > >
>> > > http://www.z-engineering.com/Kit_SantaFe.htm
>> > >
>> > > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
>> V6
>> > > (which is what I have - smile). The original is 174 PS (is PS = break
>> > horse
>> > > power?
>> > > Sorry, I'm not so technically minded). Anyway, the kit raises the
>power
>> to
>> > > some
>> > > 230 PS. Nice.
>> > > The text says (excuse the bad translation - I only want to give you a
>> > rough
>> > > idea):
>> > > "The turbo compressor kit developed by Z-Engineering and rigirously
>> tested
>> > > on the testing stand and under toughest conditions is installed onto
>the
>> > > original engine
>> > > with no modification to its mechanical basics. So the power boost is
>> > > acheived without such disadvantages as a reduction in the compression
>> > ratio
>> > > (I'm guessing here...).
>> > > Thanks to the unique internal labyrinth oil lubrification system, the
>> > > Z-Engineering compressor is entirely indepentdent of the oil system of
>> the
>> > > engine, so it is not necessary to drill into the engine's
>lubrification
>> > > system.
>> > >
>> > > This means that it is possible to sell the vehicle and its engine
>> > separately
>> > > from the
>> > > compressor module (as both are not modified by installation).
>> > > The compressor is driven by a separate belt whose driving wheel
>(again,
>> > > excuse
>> > > my ignorance of the correct terminology) is bolted onto the original
>> belt
>> > > wheel.
>> > > Due to the high efficiency and the low energy loss gear system of the
>> ZR3
>> > > compressor, the turbine rotation of 36'000 rpm already generates a
>> > pressure
>> > > of 0.4 bar (sorry, don't know what htat is in psi...) and a power
>surge
>> of
>> > > some
>> > > 55 PS!
>> > >
>> > > Because the rotation speed is comparatively low, and the compressor
>has
>> > its
>> > > own separate oil system, it is not afflicted by high operating
>> > temperatures.
>> > > This also produces relatively cool compressed air compared to
>> conventional
>> > > compressor or turbo systems, which translates into higher power gain
>> even
>> > > without an intercooler
>> > > radiator."
>> > >
>> > > The text then goes on to name the garage where you can have the kit
>> > > installed in Switzerland. It also names the price of the kit - some $
>> > 4'500
>> > > . Ouch...
>> > >
>> > > But still - cool mod. Anyone know of anyone who has actually done
>this?
>> > I'd
>> > > like
>> > > to do it, but only once my warranty has run out, as this would sure as
>> > h***
>> > > void it,
>> > > I guess...
>> > >
>> > > Cheers, D
>> > >
>> > >
>> >
>> >
>>
>>
>
kit for the Delta engine (the 2.7L V6 used in the Sonata, Tiburon,
Santa Fe, and Kia Optima). It will void the factory powertrain
warranty but Alpine will warranty your engine for 3 years (which is
extendable to the full 10 years).
On Wed, 3 Sep 2003 08:54:01 -0400, "Mess" <eatmeraw@noemail.com>
wrote:
>Yes, sounds right blower, super-charger.
>
>"Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
>news:3f556d7b$1@news.swissonline.ch...
>> :-)
>>
>> Yeah, well, may not actually wait that long... We only get a three-year
>> warranty here in Switzerland.
>>
>> Thinking about it, I think I was wrong to call it a turbo - probably I
>> should have
>> translated it as a supercharger, no?
>>
>> Cheers, D
>>
>> "Mess" <eatmeraw@noemail.com> schrieb im Newsbeitrag
>> news:bj3jgv$6dm$1@bob.news.rcn.net...
>> > 10 yrs is a long time to wait. Sounds kewl though.
>> >
>> > "Daniel Schwarz Carigiet" <danis@dplanet.ch> wrote in message
>> > news:3f54e94b$1@news.swissonline.ch...
>> > > Hi guys
>> > >
>> > > Not really considering this right now, but has anyone done this or
>> > something
>> > > similar?
>> > > The web page is in German, but I've made a rough translation into
>> English
>> > > below.
>> > >
>> > > http://www.z-engineering.com/Kit_SantaFe.htm
>> > >
>> > > The first part says that the turbo kit is for the Hyundai Santa Fe 2.7
>> V6
>> > > (which is what I have - smile). The original is 174 PS (is PS = break
>> > horse
>> > > power?
>> > > Sorry, I'm not so technically minded). Anyway, the kit raises the
>power
>> to
>> > > some
>> > > 230 PS. Nice.
>> > > The text says (excuse the bad translation - I only want to give you a
>> > rough
>> > > idea):
>> > > "The turbo compressor kit developed by Z-Engineering and rigirously
>> tested
>> > > on the testing stand and under toughest conditions is installed onto
>the
>> > > original engine
>> > > with no modification to its mechanical basics. So the power boost is
>> > > acheived without such disadvantages as a reduction in the compression
>> > ratio
>> > > (I'm guessing here...).
>> > > Thanks to the unique internal labyrinth oil lubrification system, the
>> > > Z-Engineering compressor is entirely indepentdent of the oil system of
>> the
>> > > engine, so it is not necessary to drill into the engine's
>lubrification
>> > > system.
>> > >
>> > > This means that it is possible to sell the vehicle and its engine
>> > separately
>> > > from the
>> > > compressor module (as both are not modified by installation).
>> > > The compressor is driven by a separate belt whose driving wheel
>(again,
>> > > excuse
>> > > my ignorance of the correct terminology) is bolted onto the original
>> belt
>> > > wheel.
>> > > Due to the high efficiency and the low energy loss gear system of the
>> ZR3
>> > > compressor, the turbine rotation of 36'000 rpm already generates a
>> > pressure
>> > > of 0.4 bar (sorry, don't know what htat is in psi...) and a power
>surge
>> of
>> > > some
>> > > 55 PS!
>> > >
>> > > Because the rotation speed is comparatively low, and the compressor
>has
>> > its
>> > > own separate oil system, it is not afflicted by high operating
>> > temperatures.
>> > > This also produces relatively cool compressed air compared to
>> conventional
>> > > compressor or turbo systems, which translates into higher power gain
>> even
>> > > without an intercooler
>> > > radiator."
>> > >
>> > > The text then goes on to name the garage where you can have the kit
>> > > installed in Switzerland. It also names the price of the kit - some $
>> > 4'500
>> > > . Ouch...
>> > >
>> > > But still - cool mod. Anyone know of anyone who has actually done
>this?
>> > I'd
>> > > like
>> > > to do it, but only once my warranty has run out, as this would sure as
>> > h***
>> > > void it,
>> > > I guess...
>> > >
>> > > Cheers, D
>> > >
>> > >
>> >
>> >
>>
>>
>
Thread
Thread Starter
Forum
Replies
Last Post
honda video
Honda Videos
0
Jul 31, 2008 10:41 PM
yokosi
Car Parts For Sale
8
Aug 16, 2005 08:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
