Tires for Elantra
Guest
Posts: n/a
Re: Tires for Elantra
> Please remember that the Elantra takes 'H-rated' tires. The Yokohama AVID
> Touring is only a 'T' a lower-rated tire, which would be acceptable on
> that Saturn, but not on the Elantra.
I'd be interested to hear more about the "T" Vs "H" rating. I understand
that an "H" rating = 130mph and a "T" rating = 118mph. Assuming that you
don't want to drive the Elantra faster than 118mph (and good luck if you
do!<g>) why would putting a "T" rated tire on it be unacceptable?
Guest
Posts: n/a
Re: Tires for Elantra
"VicTek" <abc@xyz.com> wrote in
news:M8xRg.15703$IA.861@newssvr11.news.prodigy.com :
>
>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>> AVID Touring is only a 'T' a lower-rated tire, which would be
>> acceptable on that Saturn, but not on the Elantra.
>
> I'd be interested to hear more about the "T" Vs "H" rating. I
> understand that an "H" rating = 130mph and a "T" rating = 118mph.
> Assuming that you don't want to drive the Elantra faster than 118mph
> (and good luck if you do!<g>) why would putting a "T" rated tire on it
> be unacceptable?
I'd also be interested in this, as well as the source for the Rev.'s claim
that an H-rated tire should have 5 more PSI of air in it to be effective.
Eric
news:M8xRg.15703$IA.861@newssvr11.news.prodigy.com :
>
>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>> AVID Touring is only a 'T' a lower-rated tire, which would be
>> acceptable on that Saturn, but not on the Elantra.
>
> I'd be interested to hear more about the "T" Vs "H" rating. I
> understand that an "H" rating = 130mph and a "T" rating = 118mph.
> Assuming that you don't want to drive the Elantra faster than 118mph
> (and good luck if you do!<g>) why would putting a "T" rated tire on it
> be unacceptable?
I'd also be interested in this, as well as the source for the Rev.'s claim
that an H-rated tire should have 5 more PSI of air in it to be effective.
Eric
Guest
Posts: n/a
Re: Tires for Elantra
On Sun, 24 Sep 2006 15:36:07 GMT, "Eric G."
<NgOrSePeAnM99@Zoptonline.Znet> wrote:
>"VicTek" <abc@xyz.com> wrote in
>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.co m:
>
>>
>>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>>> AVID Touring is only a 'T' a lower-rated tire, which would be
>>> acceptable on that Saturn, but not on the Elantra.
>>
>> I'd be interested to hear more about the "T" Vs "H" rating. I
>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>> Assuming that you don't want to drive the Elantra faster than 118mph
>> (and good luck if you do!<g>) why would putting a "T" rated tire on it
>> be unacceptable?
>
>I'd also be interested in this, as well as the source for the Rev.'s claim
>that an H-rated tire should have 5 more PSI of air in it to be effective.
>
>Eric
>
try http://www.type2.com/library/tires/tirefaq.htm - look at the
pressure question
<NgOrSePeAnM99@Zoptonline.Znet> wrote:
>"VicTek" <abc@xyz.com> wrote in
>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.co m:
>
>>
>>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>>> AVID Touring is only a 'T' a lower-rated tire, which would be
>>> acceptable on that Saturn, but not on the Elantra.
>>
>> I'd be interested to hear more about the "T" Vs "H" rating. I
>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>> Assuming that you don't want to drive the Elantra faster than 118mph
>> (and good luck if you do!<g>) why would putting a "T" rated tire on it
>> be unacceptable?
>
>I'd also be interested in this, as well as the source for the Rev.'s claim
>that an H-rated tire should have 5 more PSI of air in it to be effective.
>
>Eric
>
try http://www.type2.com/library/tires/tirefaq.htm - look at the
pressure question
Guest
Posts: n/a
Re: Tires for Elantra
On Sun, 24 Sep 2006 15:36:07 GMT, "Eric G."
<NgOrSePeAnM99@Zoptonline.Znet> wrote:
>"VicTek" <abc@xyz.com> wrote in
>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.co m:
>
>>
>>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>>> AVID Touring is only a 'T' a lower-rated tire, which would be
>>> acceptable on that Saturn, but not on the Elantra.
>>
>> I'd be interested to hear more about the "T" Vs "H" rating. I
>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>> Assuming that you don't want to drive the Elantra faster than 118mph
>> (and good luck if you do!<g>) why would putting a "T" rated tire on it
>> be unacceptable?
>
>I'd also be interested in this, as well as the source for the Rev.'s claim
>that an H-rated tire should have 5 more PSI of air in it to be effective.
>
>Eric
>
I haven't looked up the rating but I have been under the impression
that manufacturer's are ore focused on a soft ride so tend t reccomend
low pressures.
<NgOrSePeAnM99@Zoptonline.Znet> wrote:
>"VicTek" <abc@xyz.com> wrote in
>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.co m:
>
>>
>>> Please remember that the Elantra takes 'H-rated' tires. The Yokohama
>>> AVID Touring is only a 'T' a lower-rated tire, which would be
>>> acceptable on that Saturn, but not on the Elantra.
>>
>> I'd be interested to hear more about the "T" Vs "H" rating. I
>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>> Assuming that you don't want to drive the Elantra faster than 118mph
>> (and good luck if you do!<g>) why would putting a "T" rated tire on it
>> be unacceptable?
>
>I'd also be interested in this, as well as the source for the Rev.'s claim
>that an H-rated tire should have 5 more PSI of air in it to be effective.
>
>Eric
>
I haven't looked up the rating but I have been under the impression
that manufacturer's are ore focused on a soft ride so tend t reccomend
low pressures.
Guest
Posts: n/a
Re: Tires for Elantra
nothermark <nothermark@not.here> wrote in
news:g70eh2ldatsqbq1ukotv8e2bscfdoaoaud@4ax.com:
> On Sun, 24 Sep 2006 15:36:07 GMT, "Eric G."
> <NgOrSePeAnM99@Zoptonline.Znet> wrote:
>
>>"VicTek" <abc@xyz.com> wrote in
>>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.c om:
>>
>>>
>>>> Please remember that the Elantra takes 'H-rated' tires. The
>>>> Yokohama AVID Touring is only a 'T' a lower-rated tire, which would
>>>> be acceptable on that Saturn, but not on the Elantra.
>>>
>>> I'd be interested to hear more about the "T" Vs "H" rating. I
>>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>>> Assuming that you don't want to drive the Elantra faster than 118mph
>>> (and good luck if you do!<g>) why would putting a "T" rated tire on
>>> it be unacceptable?
>>
>>I'd also be interested in this, as well as the source for the Rev.'s
>>claim that an H-rated tire should have 5 more PSI of air in it to be
>>effective.
>>
>>Eric
>>
>
> try http://www.type2.com/library/tires/tirefaq.htm - look at the
> pressure question
Done. Same question remains. Nowhere does it say anything about H-rated
tires needing 5 PSI more to be effective.
news:g70eh2ldatsqbq1ukotv8e2bscfdoaoaud@4ax.com:
> On Sun, 24 Sep 2006 15:36:07 GMT, "Eric G."
> <NgOrSePeAnM99@Zoptonline.Znet> wrote:
>
>>"VicTek" <abc@xyz.com> wrote in
>>news:M8xRg.15703$IA.861@newssvr11.news.prodigy.c om:
>>
>>>
>>>> Please remember that the Elantra takes 'H-rated' tires. The
>>>> Yokohama AVID Touring is only a 'T' a lower-rated tire, which would
>>>> be acceptable on that Saturn, but not on the Elantra.
>>>
>>> I'd be interested to hear more about the "T" Vs "H" rating. I
>>> understand that an "H" rating = 130mph and a "T" rating = 118mph.
>>> Assuming that you don't want to drive the Elantra faster than 118mph
>>> (and good luck if you do!<g>) why would putting a "T" rated tire on
>>> it be unacceptable?
>>
>>I'd also be interested in this, as well as the source for the Rev.'s
>>claim that an H-rated tire should have 5 more PSI of air in it to be
>>effective.
>>
>>Eric
>>
>
> try http://www.type2.com/library/tires/tirefaq.htm - look at the
> pressure question
Done. Same question remains. Nowhere does it say anything about H-rated
tires needing 5 PSI more to be effective.
Guest
Posts: n/a
Re: Tires for Elantra
I will apologize in advance for the length of this, and at some point, I
would need a representative of the tire or rubber industry to better and
fully explain why it is imperative that one only replace tires with an equal
or higher speed rating then what is given initially.
But I have just finished scanning 23 different articles from tire
manufacturers and wholesalers, automobile manufacturers and more. Every one
of them said the same thing. And very often the reminder is made with
explanation points and other things. They are dead serious about this.
I am quite certain this really has nothing to do with speed. Most likely,
it has to do with heat performance and resistance. But the speed rating is
an already accepted formula out there (taken from Europe) that they can use
to accomplish the same thing.
Almost every tire made, as long as it is not damaged or otherwise, is
manufactured to withstand speeds up to 100 mph, fully loaded, and properly
inflated.
While the speed ratings do add additional miles per hour (if you do what
they recommend), what this really means is an additional buffer against heat
over the speed you are actually driving.
If you will study the top sidewall numbers (for treadwear, traction and
temperature), almost every tire rated 'H' and above achieves an 'A'
temperature rating. An 'S' or a 'T' is almost always rated 'B,' with even a
few 'C's out there. That is not a minor matter.
While underinflation was a key factor in the Firestone tires that failed on
the Ford Explorers several years ago, the fact also was that these
Wilderness tires had a 'C' temperature rating (since upgraded to 'B'). That
plus the low inflation recommendation (only 26 pounds), and the fact that
since many people neglected to check air pressure, the tires were running on
far less air then that, you had a serious problem.
While this could partially be fixed with higher inflation recommendations,
car and tire manufacturers know that many Americans love their soft, cushy
rides (think of the big, boatish Buicks). And with the much greater focus
on overall safety, including features such as traction and stability
control, cars certainly needed to also handle better without feeling like
your tires are made of concrete.
The only solution was to put tires on cars with higher speed ratings. An
'H' and maybe even a 'V' tire, inflated to maybe 30 pounds can still be a
fairly soft riding tire. But it will handle and brake much better, and
handle whatever the car can throw at it better then more standard tires can.
As for the question about the extra inflation, see this link from "Tire
Rack." You can also get this information from the PR packet on ANY tire you
buy that has any kind of speed rating (or check the company's website for
the info for that particular tire).
http://www.tirerack.com/tires/tirete...adj_Hspeed.jsp
Their point seems to be that if you want that extra "margin" afforded by an
'H' tire, you have to inflate extra pounds, one pound per every six mph, up
to five pounds. I did it with mine because my car definitely handles better
at 35 pounds rather than the recommended 30 pounds.
The fact that the tires are now safe to 130 mph means nothing. The fact
that there is probably now also a greater margin against heat stress means a
lot.
My point is this: I trust that the car and tire manufacturers know what
they are doing.
Hope this helps, folks!
Rev. Thomas Wenndt
"Rev. Tom Wenndt" <trwenndt@grics.net> wrote in message
news:ef4prf07gn@enews1.newsguy.com...
> Emjoyed all the posts on this, even though I also just bought a new set of
> Elantra tires.
>
> Please remember that the Elantra takes 'H-rated' tires. The Yokohama AVID
> Touring is only a 'T' a lower-rated tire, which would be acceptable on
> that Saturn, but not on the Elantra.
>
> An EXCELLENT Yokohama tire that does work, however, is the Yokohama AVID
> H4s. Good in every sense of the word. Only problem is a very spotty
> dealer network, though you can get it from Tire Rack.
>
> But I agree with the concensus on the Sumitomo HTR H4 (I didn't think this
> forum agreed on anything). That is what I also just put on my '02
> Elantra. Bought them from Sears during a recent buy 3 get 1 free sale.
>
> One thing I did notice was that, on the door placard, it recommends
> running the tires on the Elantra (front and rear) at 30 psi. At that
> pressure, the tires were wonderfully smooth and soft. But the handling
> and braking were underwhelming.
>
> But since 'H' tires need to be inflated by 5 additional pounds to get the
> true 'H' benefit, I decided to pump these to 35 p.s.i. and see what
> happened. Indeed, the ride was a tad firmer. But the handling and
> braking were transformationally better, and the tire was just as quiet.
>
> So I would highly recommend running these at 35 p.s.i. It is a VERY good
> tire, and looks to be an excellent value.
>
> One more thing. Despite the fact that someone said they put these tires
> on two years ago, the HTR H4 has only been on the market about 6 months
> (check the website).
>
> There has been (and still is) a Sumitomo HTR T4, but that tire, especially
> in comparison to the H4, is rather underwhelming, and is yet another
> 'T'-rated tire that probably should not be put on cars where H tires are
> recommended.
>
> Hope all this helps.
>
> Tom Wenndt
>
>
> "Harry Balzak" <noaddress@my.home> wrote in message
> news:1B0Rg.1025$ef2.652@fed1read09...
>>I put a set of Yokohama AVID touring tires on my '02 Saturn SL2 (compact
>>sedan), and they now have over 65,000 miles and still look good. I think
>>I paid about $65.00 per tire (+ tax, and the usual other BS), but still
>>well worth it. They ride great, are quiet, handle well, and I will buy
>>another set when it's time. I will put them on my '05 Elantra when the
>>time comes for that one too.
>>
>> "nothermark" <nothermark@not.here> wrote in message
>> news:0in8h2laabrrrn1qmm5jubqd1g4uj2gqjc@4ax.com...
>>> I'm looking at replacing the tires on my 2006 Elantra. I'm a high
>>> milage out in all weather person who has not been following tire tech
>>> lately so I thought I would post a note here. Anyone have anything to
>>> reccomend?
>>>
>>
>>
>
>
would need a representative of the tire or rubber industry to better and
fully explain why it is imperative that one only replace tires with an equal
or higher speed rating then what is given initially.
But I have just finished scanning 23 different articles from tire
manufacturers and wholesalers, automobile manufacturers and more. Every one
of them said the same thing. And very often the reminder is made with
explanation points and other things. They are dead serious about this.
I am quite certain this really has nothing to do with speed. Most likely,
it has to do with heat performance and resistance. But the speed rating is
an already accepted formula out there (taken from Europe) that they can use
to accomplish the same thing.
Almost every tire made, as long as it is not damaged or otherwise, is
manufactured to withstand speeds up to 100 mph, fully loaded, and properly
inflated.
While the speed ratings do add additional miles per hour (if you do what
they recommend), what this really means is an additional buffer against heat
over the speed you are actually driving.
If you will study the top sidewall numbers (for treadwear, traction and
temperature), almost every tire rated 'H' and above achieves an 'A'
temperature rating. An 'S' or a 'T' is almost always rated 'B,' with even a
few 'C's out there. That is not a minor matter.
While underinflation was a key factor in the Firestone tires that failed on
the Ford Explorers several years ago, the fact also was that these
Wilderness tires had a 'C' temperature rating (since upgraded to 'B'). That
plus the low inflation recommendation (only 26 pounds), and the fact that
since many people neglected to check air pressure, the tires were running on
far less air then that, you had a serious problem.
While this could partially be fixed with higher inflation recommendations,
car and tire manufacturers know that many Americans love their soft, cushy
rides (think of the big, boatish Buicks). And with the much greater focus
on overall safety, including features such as traction and stability
control, cars certainly needed to also handle better without feeling like
your tires are made of concrete.
The only solution was to put tires on cars with higher speed ratings. An
'H' and maybe even a 'V' tire, inflated to maybe 30 pounds can still be a
fairly soft riding tire. But it will handle and brake much better, and
handle whatever the car can throw at it better then more standard tires can.
As for the question about the extra inflation, see this link from "Tire
Rack." You can also get this information from the PR packet on ANY tire you
buy that has any kind of speed rating (or check the company's website for
the info for that particular tire).
http://www.tirerack.com/tires/tirete...adj_Hspeed.jsp
Their point seems to be that if you want that extra "margin" afforded by an
'H' tire, you have to inflate extra pounds, one pound per every six mph, up
to five pounds. I did it with mine because my car definitely handles better
at 35 pounds rather than the recommended 30 pounds.
The fact that the tires are now safe to 130 mph means nothing. The fact
that there is probably now also a greater margin against heat stress means a
lot.
My point is this: I trust that the car and tire manufacturers know what
they are doing.
Hope this helps, folks!
Rev. Thomas Wenndt
"Rev. Tom Wenndt" <trwenndt@grics.net> wrote in message
news:ef4prf07gn@enews1.newsguy.com...
> Emjoyed all the posts on this, even though I also just bought a new set of
> Elantra tires.
>
> Please remember that the Elantra takes 'H-rated' tires. The Yokohama AVID
> Touring is only a 'T' a lower-rated tire, which would be acceptable on
> that Saturn, but not on the Elantra.
>
> An EXCELLENT Yokohama tire that does work, however, is the Yokohama AVID
> H4s. Good in every sense of the word. Only problem is a very spotty
> dealer network, though you can get it from Tire Rack.
>
> But I agree with the concensus on the Sumitomo HTR H4 (I didn't think this
> forum agreed on anything). That is what I also just put on my '02
> Elantra. Bought them from Sears during a recent buy 3 get 1 free sale.
>
> One thing I did notice was that, on the door placard, it recommends
> running the tires on the Elantra (front and rear) at 30 psi. At that
> pressure, the tires were wonderfully smooth and soft. But the handling
> and braking were underwhelming.
>
> But since 'H' tires need to be inflated by 5 additional pounds to get the
> true 'H' benefit, I decided to pump these to 35 p.s.i. and see what
> happened. Indeed, the ride was a tad firmer. But the handling and
> braking were transformationally better, and the tire was just as quiet.
>
> So I would highly recommend running these at 35 p.s.i. It is a VERY good
> tire, and looks to be an excellent value.
>
> One more thing. Despite the fact that someone said they put these tires
> on two years ago, the HTR H4 has only been on the market about 6 months
> (check the website).
>
> There has been (and still is) a Sumitomo HTR T4, but that tire, especially
> in comparison to the H4, is rather underwhelming, and is yet another
> 'T'-rated tire that probably should not be put on cars where H tires are
> recommended.
>
> Hope all this helps.
>
> Tom Wenndt
>
>
> "Harry Balzak" <noaddress@my.home> wrote in message
> news:1B0Rg.1025$ef2.652@fed1read09...
>>I put a set of Yokohama AVID touring tires on my '02 Saturn SL2 (compact
>>sedan), and they now have over 65,000 miles and still look good. I think
>>I paid about $65.00 per tire (+ tax, and the usual other BS), but still
>>well worth it. They ride great, are quiet, handle well, and I will buy
>>another set when it's time. I will put them on my '05 Elantra when the
>>time comes for that one too.
>>
>> "nothermark" <nothermark@not.here> wrote in message
>> news:0in8h2laabrrrn1qmm5jubqd1g4uj2gqjc@4ax.com...
>>> I'm looking at replacing the tires on my 2006 Elantra. I'm a high
>>> milage out in all weather person who has not been following tire tech
>>> lately so I thought I would post a note here. Anyone have anything to
>>> reccomend?
>>>
>>
>>
>
>
Guest
Posts: n/a
Re: Tires for Elantra
Rev. Tom Wenndt wrote:
>
> One thing I did notice was that, on the door placard, it recommends running
> the tires on the Elantra (front and rear) at 30 psi. At that pressure, the
> tires were wonderfully smooth and soft. But the handling and braking were
> underwhelming.
>
> But since 'H' tires need to be inflated by 5 additional pounds to get the
> true 'H' benefit,
Where did you hear that?
> I decided to pump these to 35 p.s.i. and see what
> happened. Indeed, the ride was a tad firmer. But the handling and braking
> were transformationally better, and the tire was just as quiet.
Try running them at 36 front/32 rear and the handling will improve even
more. FWD cars should be run with more pressure in the front than the
rear, since the fronts support most of the weight. If you have done so
already, installing the 19.2 mm rear sway bar from an '03+ Tiburon GT
dramatically improves the Elantra's handling, reducing the overwhelming
understeer of the stock suspension.
>
> One thing I did notice was that, on the door placard, it recommends running
> the tires on the Elantra (front and rear) at 30 psi. At that pressure, the
> tires were wonderfully smooth and soft. But the handling and braking were
> underwhelming.
>
> But since 'H' tires need to be inflated by 5 additional pounds to get the
> true 'H' benefit,
Where did you hear that?
> I decided to pump these to 35 p.s.i. and see what
> happened. Indeed, the ride was a tad firmer. But the handling and braking
> were transformationally better, and the tire was just as quiet.
Try running them at 36 front/32 rear and the handling will improve even
more. FWD cars should be run with more pressure in the front than the
rear, since the fronts support most of the weight. If you have done so
already, installing the 19.2 mm rear sway bar from an '03+ Tiburon GT
dramatically improves the Elantra's handling, reducing the overwhelming
understeer of the stock suspension.
Guest
Posts: n/a
Re: Tires for Elantra
nothermark wrote:
> I haven't looked up the rating but I have been under the impression
> that manufacturer's are ore focused on a soft ride so tend t reccomend
> low pressures.
Soft ride and understeer, as it's considered "safer" in front-drive cars.
> I haven't looked up the rating but I have been under the impression
> that manufacturer's are ore focused on a soft ride so tend t reccomend
> low pressures.
Soft ride and understeer, as it's considered "safer" in front-drive cars.
Guest
Posts: n/a
Re: Tires for Elantra
"Rev. Tom Wenndt" <trwenndt@grics.net> wrote in
news:ef7enp0111t@enews3.newsguy.com:
> As for the question about the extra inflation, see this link from
> "Tire Rack." You can also get this information from the PR packet on
> ANY tire you buy that has any kind of speed rating (or check the
> company's website for the info for that particular tire).
>
> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
..
> jsp
>
> Their point seems to be that if you want that extra "margin" afforded
> by an 'H' tire, you have to inflate extra pounds, one pound per every
> six mph, up to five pounds. I did it with mine because my car
> definitely handles better at 35 pounds rather than the recommended 30
> pounds.
>
> The fact that the tires are now safe to 130 mph means nothing. The
> fact that there is probably now also a greater margin against heat
> stress means a lot.
>
> My point is this: I trust that the car and tire manufacturers know
> what they are doing.
>
> Hope this helps, folks!
>
> Rev. Thomas Wenndt
Tom, I read the link you posted here. I don't think you are reading it
right. The extra margin of safety comes when you are at speeds in
excess of 100 MPH. I don't see a thing there that says handling or
safety improve at speeds lower than that. And if you are regularly
exceeding 100 MPH on US roads, I think you have bigger problems than
your tire inflation.
I concede that I like to run my tires at 32-35 PSI irregardless of what
the OEM recommendation is because I like the sharper turn-in response,
but I think driving at or near posted speed limits in the US, the higher
pressure does abolutely nothing for "limit" handling and has only
negligible effects on heat build-up and wear.
The only effect I have even seen on the road is better rain traction
from lowering the pressure (I've gone as low as 28 PSI), and better snow
traction at a higher pressure (I go up to sidewall maximum in deep
snow).
The track is an entirely different story, and so is the Autobahn.
Eric
news:ef7enp0111t@enews3.newsguy.com:
> As for the question about the extra inflation, see this link from
> "Tire Rack." You can also get this information from the PR packet on
> ANY tire you buy that has any kind of speed rating (or check the
> company's website for the info for that particular tire).
>
> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
..
> jsp
>
> Their point seems to be that if you want that extra "margin" afforded
> by an 'H' tire, you have to inflate extra pounds, one pound per every
> six mph, up to five pounds. I did it with mine because my car
> definitely handles better at 35 pounds rather than the recommended 30
> pounds.
>
> The fact that the tires are now safe to 130 mph means nothing. The
> fact that there is probably now also a greater margin against heat
> stress means a lot.
>
> My point is this: I trust that the car and tire manufacturers know
> what they are doing.
>
> Hope this helps, folks!
>
> Rev. Thomas Wenndt
Tom, I read the link you posted here. I don't think you are reading it
right. The extra margin of safety comes when you are at speeds in
excess of 100 MPH. I don't see a thing there that says handling or
safety improve at speeds lower than that. And if you are regularly
exceeding 100 MPH on US roads, I think you have bigger problems than
your tire inflation.
I concede that I like to run my tires at 32-35 PSI irregardless of what
the OEM recommendation is because I like the sharper turn-in response,
but I think driving at or near posted speed limits in the US, the higher
pressure does abolutely nothing for "limit" handling and has only
negligible effects on heat build-up and wear.
The only effect I have even seen on the road is better rain traction
from lowering the pressure (I've gone as low as 28 PSI), and better snow
traction at a higher pressure (I go up to sidewall maximum in deep
snow).
The track is an entirely different story, and so is the Autobahn.
Eric
Guest
Posts: n/a
Re: Tires for Elantra
Eric G. wrote:
> "Rev. Tom Wenndt" <trwenndt@grics.net> wrote in
> news:ef7enp0111t@enews3.newsguy.com:
>
> > As for the question about the extra inflation, see this link from
>> "Tire Rack." You can also get this information from the PR packet on
>> ANY tire you buy that has any kind of speed rating (or check the
>> company's website for the info for that particular tire).
>>
>> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
> .
>> jsp
>>
>> Their point seems to be that if you want that extra "margin" afforded
>> by an 'H' tire, you have to inflate extra pounds, one pound per every
>> six mph, up to five pounds. I did it with mine because my car
>> definitely handles better at 35 pounds rather than the recommended 30
>> pounds.
>>
>> The fact that the tires are now safe to 130 mph means nothing. The
>> fact that there is probably now also a greater margin against heat
>> stress means a lot.
>>
>> My point is this: I trust that the car and tire manufacturers know
>> what they are doing.
>>
>> Hope this helps, folks!
>>
>> Rev. Thomas Wenndt
>
> Tom, I read the link you posted here. I don't think you are reading it
> right. The extra margin of safety comes when you are at speeds in
> excess of 100 MPH. I don't see a thing there that says handling or
> safety improve at speeds lower than that. And if you are regularly
> exceeding 100 MPH on US roads, I think you have bigger problems than
> your tire inflation.
The higher-speed-rated tires typically have stiffer treads and sidewalls
to resist deformation due to centrifugal force at higher speeds, so
you'll notice sharper turn-in performance and a somewhat harsher ride.
Whether this translates into increased safety at anything other than max
speed depends on the way you drive. ;-)
> "Rev. Tom Wenndt" <trwenndt@grics.net> wrote in
> news:ef7enp0111t@enews3.newsguy.com:
>
> > As for the question about the extra inflation, see this link from
>> "Tire Rack." You can also get this information from the PR packet on
>> ANY tire you buy that has any kind of speed rating (or check the
>> company's website for the info for that particular tire).
>>
>> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
> .
>> jsp
>>
>> Their point seems to be that if you want that extra "margin" afforded
>> by an 'H' tire, you have to inflate extra pounds, one pound per every
>> six mph, up to five pounds. I did it with mine because my car
>> definitely handles better at 35 pounds rather than the recommended 30
>> pounds.
>>
>> The fact that the tires are now safe to 130 mph means nothing. The
>> fact that there is probably now also a greater margin against heat
>> stress means a lot.
>>
>> My point is this: I trust that the car and tire manufacturers know
>> what they are doing.
>>
>> Hope this helps, folks!
>>
>> Rev. Thomas Wenndt
>
> Tom, I read the link you posted here. I don't think you are reading it
> right. The extra margin of safety comes when you are at speeds in
> excess of 100 MPH. I don't see a thing there that says handling or
> safety improve at speeds lower than that. And if you are regularly
> exceeding 100 MPH on US roads, I think you have bigger problems than
> your tire inflation.
The higher-speed-rated tires typically have stiffer treads and sidewalls
to resist deformation due to centrifugal force at higher speeds, so
you'll notice sharper turn-in performance and a somewhat harsher ride.
Whether this translates into increased safety at anything other than max
speed depends on the way you drive. ;-)
Guest
Posts: n/a
Re: Tires for Elantra
> Try running them at 36 front/32 rear and the handling will improve even
> more. FWD cars should be run with more pressure in the front than the
> rear, since the fronts support most of the weight. If you have done so
> already, installing the 19.2 mm rear sway bar from an '03+ Tiburon GT
> dramatically improves the Elantra's handling, reducing the overwhelming
> understeer of the stock suspension.
Regarding installing the rear sway bar, what does that entail in terms of
labor and cost? Is it a DIY or must it be done in a garage? Does it make a
difference when driving sedately, or only during more demanding maneuvers?
WOW, three questions in a row <g>.
Guest
Posts: n/a
Re: Tires for Elantra
On Mon, 25 Sep 2006 20:44:04 GMT, Brian Nystrom
<brian.nystrom@verizon.net> wrote:
>Eric G. wrote:
>> "Rev. Tom Wenndt" <trwenndt@grics.net> wrote in
>> news:ef7enp0111t@enews3.newsguy.com:
>>
>> > As for the question about the extra inflation, see this link from
>>> "Tire Rack." You can also get this information from the PR packet on
>>> ANY tire you buy that has any kind of speed rating (or check the
>>> company's website for the info for that particular tire).
>>>
>>> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
>> .
>>> jsp
>>>
>>> Their point seems to be that if you want that extra "margin" afforded
>>> by an 'H' tire, you have to inflate extra pounds, one pound per every
>>> six mph, up to five pounds. I did it with mine because my car
>>> definitely handles better at 35 pounds rather than the recommended 30
>>> pounds.
>>>
>>> The fact that the tires are now safe to 130 mph means nothing. The
>>> fact that there is probably now also a greater margin against heat
>>> stress means a lot.
>>>
>>> My point is this: I trust that the car and tire manufacturers know
>>> what they are doing.
>>>
>>> Hope this helps, folks!
>>>
>>> Rev. Thomas Wenndt
>>
>> Tom, I read the link you posted here. I don't think you are reading it
>> right. The extra margin of safety comes when you are at speeds in
>> excess of 100 MPH. I don't see a thing there that says handling or
>> safety improve at speeds lower than that. And if you are regularly
>> exceeding 100 MPH on US roads, I think you have bigger problems than
>> your tire inflation.
>
>The higher-speed-rated tires typically have stiffer treads and sidewalls
>to resist deformation due to centrifugal force at higher speeds, so
>you'll notice sharper turn-in performance and a somewhat harsher ride.
>Whether this translates into increased safety at anything other than max
>speed depends on the way you drive. ;-)
I think folks are missing the obvious. Inflating a tire to a higher
presure decreases overall flex as the sidewalls are stiffer and the
footprint smaller. That should decrease the heat generated at any
speed.
;-)
<brian.nystrom@verizon.net> wrote:
>Eric G. wrote:
>> "Rev. Tom Wenndt" <trwenndt@grics.net> wrote in
>> news:ef7enp0111t@enews3.newsguy.com:
>>
>> > As for the question about the extra inflation, see this link from
>>> "Tire Rack." You can also get this information from the PR packet on
>>> ANY tire you buy that has any kind of speed rating (or check the
>>> company's website for the info for that particular tire).
>>>
>>> http://www.tirerack.com/tires/tirete...loadadj_Hspeed
>> .
>>> jsp
>>>
>>> Their point seems to be that if you want that extra "margin" afforded
>>> by an 'H' tire, you have to inflate extra pounds, one pound per every
>>> six mph, up to five pounds. I did it with mine because my car
>>> definitely handles better at 35 pounds rather than the recommended 30
>>> pounds.
>>>
>>> The fact that the tires are now safe to 130 mph means nothing. The
>>> fact that there is probably now also a greater margin against heat
>>> stress means a lot.
>>>
>>> My point is this: I trust that the car and tire manufacturers know
>>> what they are doing.
>>>
>>> Hope this helps, folks!
>>>
>>> Rev. Thomas Wenndt
>>
>> Tom, I read the link you posted here. I don't think you are reading it
>> right. The extra margin of safety comes when you are at speeds in
>> excess of 100 MPH. I don't see a thing there that says handling or
>> safety improve at speeds lower than that. And if you are regularly
>> exceeding 100 MPH on US roads, I think you have bigger problems than
>> your tire inflation.
>
>The higher-speed-rated tires typically have stiffer treads and sidewalls
>to resist deformation due to centrifugal force at higher speeds, so
>you'll notice sharper turn-in performance and a somewhat harsher ride.
>Whether this translates into increased safety at anything other than max
>speed depends on the way you drive. ;-)
I think folks are missing the obvious. Inflating a tire to a higher
presure decreases overall flex as the sidewalls are stiffer and the
footprint smaller. That should decrease the heat generated at any
speed.
;-)
Guest
Posts: n/a
Re: Tires for Elantra
nothermark <nothermark@not.here> wrote in
news:3asgh2pcqidhq6gucmti9s3bjkqmsj2omm@4ax.com:
> I think folks are missing the obvious. Inflating a tire to a higher
> presure decreases overall flex as the sidewalls are stiffer and the
> footprint smaller. That should decrease the heat generated at any
> speed.
>
> ;-)
I never argued that point, but at speeds under 100 MPH the decrease in heat
generated is so small that it borders on being statistically insignificant.
Eric
news:3asgh2pcqidhq6gucmti9s3bjkqmsj2omm@4ax.com:
> I think folks are missing the obvious. Inflating a tire to a higher
> presure decreases overall flex as the sidewalls are stiffer and the
> footprint smaller. That should decrease the heat generated at any
> speed.
>
> ;-)
I never argued that point, but at speeds under 100 MPH the decrease in heat
generated is so small that it borders on being statistically insignificant.
Eric
Guest
Posts: n/a
Re: Tires for Elantra
VicTek wrote:
>> Try running them at 36 front/32 rear and the handling will improve even
>> more. FWD cars should be run with more pressure in the front than the
>> rear, since the fronts support most of the weight. If you have done so
>> already, installing the 19.2 mm rear sway bar from an '03+ Tiburon GT
>> dramatically improves the Elantra's handling, reducing the overwhelming
>> understeer of the stock suspension.
>
> Regarding installing the rear sway bar, what does that entail in terms of
> labor and cost? Is it a DIY or must it be done in a garage? Does it make a
> difference when driving sedately, or only during more demanding maneuvers?
> WOW, three questions in a row <g>.
It's a pretty simple DIY job, though some people have reported
difficulty in loosening the nuts that hold the original bar. If you car
has steel end links, use them. If it has plastic endlinks, you may want
to replace them with the steel ones from the Tib. There are DIY
instructions on the Elantra Club site.
The difference is quite noticeable whenever you're cornering, regardless
of how aggressively. You can't appreciate how bad the stock rear setup
is until you put on the stiffer sway bar. It really transforms the
handling of the car and makes it feel much better balanced and more
securely planted to the road.
>> Try running them at 36 front/32 rear and the handling will improve even
>> more. FWD cars should be run with more pressure in the front than the
>> rear, since the fronts support most of the weight. If you have done so
>> already, installing the 19.2 mm rear sway bar from an '03+ Tiburon GT
>> dramatically improves the Elantra's handling, reducing the overwhelming
>> understeer of the stock suspension.
>
> Regarding installing the rear sway bar, what does that entail in terms of
> labor and cost? Is it a DIY or must it be done in a garage? Does it make a
> difference when driving sedately, or only during more demanding maneuvers?
> WOW, three questions in a row <g>.
It's a pretty simple DIY job, though some people have reported
difficulty in loosening the nuts that hold the original bar. If you car
has steel end links, use them. If it has plastic endlinks, you may want
to replace them with the steel ones from the Tib. There are DIY
instructions on the Elantra Club site.
The difference is quite noticeable whenever you're cornering, regardless
of how aggressively. You can't appreciate how bad the stock rear setup
is until you put on the stiffer sway bar. It really transforms the
handling of the car and makes it feel much better balanced and more
securely planted to the road.
Guest
Posts: n/a
Re: Tires for Elantra
> It's a pretty simple DIY job, though some people have reported
> difficulty in loosening the nuts that hold the original bar. If you car
> has steel end links, use them. If it has plastic endlinks, you may want to
> replace them with the steel ones from the Tib. There are DIY instructions
> on the Elantra Club site.
>
> The difference is quite noticeable whenever you're cornering, regardless
> of how aggressively. You can't appreciate how bad the stock rear setup is
> until you put on the stiffer sway bar. It really transforms the handling
> of the car and makes it feel much better balanced and more securely
> planted to the road.
Thanks Brian!
