Trouble codes
03-05-2008, 05:11 PM
#2
Guest
Posts: n/a
Re: Trouble codes
The initial four codes you report are not valid codes on the 2000 Sonata.
I suspect there's a communication issue with the code reader you're using.
This car doesn't have any networked communication system, so any code
beginning with U can be dismissed, and presuming you're checking the
engine control module, there should also be no C (chassis) codes. Those
would be in the ABS/Traction system.
Also presuming you're looking into a check engine lamp and lack of
power/misfire, look into the P0301 with normal diagnostic procedure.
Unfortunately, that's the cylinder on the passenger side at the firewall.
Usually, the problem is with the plug or plug wire.
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html
I suspect there's a communication issue with the code reader you're using.
This car doesn't have any networked communication system, so any code
beginning with U can be dismissed, and presuming you're checking the
engine control module, there should also be no C (chassis) codes. Those
would be in the ABS/Traction system.
Also presuming you're looking into a check engine lamp and lack of
power/misfire, look into the P0301 with normal diagnostic procedure.
Unfortunately, that's the cylinder on the passenger side at the firewall.
Usually, the problem is with the plug or plug wire.
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html
03-05-2008, 06:51 PM
#3
Guest
Posts: n/a
Re: Trouble codes
Hmmm... I am not using a "cheap" reader.. I intentionally did not
cheap out on the reader for this very reason... <sigh>
Yes, I am getting a check engine light, with a definite miss, and loss
of power.
I purchased a new set of plug wires and plugs already, so I guess that
I will start there.. How bad is the procedure to access the firewall
side plugs? Is it one of those disconnect the motor mounts, and roll
the engine forward routines?
me
On Wed, 05 Mar 2008 16:11:04 -0600, "hyundaitech"
<notpublic@not.public.com> wrote:
>The initial four codes you report are not valid codes on the 2000 Sonata.
>I suspect there's a communication issue with the code reader you're using.
>
>
>This car doesn't have any networked communication system, so any code
>beginning with U can be dismissed, and presuming you're checking the
>engine control module, there should also be no C (chassis) codes. Those
>would be in the ABS/Traction system.
>
>Also presuming you're looking into a check engine lamp and lack of
>power/misfire, look into the P0301 with normal diagnostic procedure.
>Unfortunately, that's the cylinder on the passenger side at the firewall.
>Usually, the problem is with the plug or plug wire.
cheap out on the reader for this very reason... <sigh>
Yes, I am getting a check engine light, with a definite miss, and loss
of power.
I purchased a new set of plug wires and plugs already, so I guess that
I will start there.. How bad is the procedure to access the firewall
side plugs? Is it one of those disconnect the motor mounts, and roll
the engine forward routines?
me
On Wed, 05 Mar 2008 16:11:04 -0600, "hyundaitech"
<notpublic@not.public.com> wrote:
>The initial four codes you report are not valid codes on the 2000 Sonata.
>I suspect there's a communication issue with the code reader you're using.
>
>
>This car doesn't have any networked communication system, so any code
>beginning with U can be dismissed, and presuming you're checking the
>engine control module, there should also be no C (chassis) codes. Those
>would be in the ABS/Traction system.
>
>Also presuming you're looking into a check engine lamp and lack of
>power/misfire, look into the P0301 with normal diagnostic procedure.
>Unfortunately, that's the cylinder on the passenger side at the firewall.
>Usually, the problem is with the plug or plug wire.
03-06-2008, 04:59 PM
#4
Guest
Posts: n/a
Re: Trouble codes
You won't have to move the engine forward, but depending on your
perspective, it could be better or worse. There's more to disassemble,
but once the plenum is out of the way, the plugs are very easy to access.
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html
perspective, it could be better or worse. There's more to disassemble,
but once the plenum is out of the way, the plugs are very easy to access.
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
