KLZE missing its brain..
guys do u know anyone that specializes mx3 with klze motors..?? everything runs on the car but i think its runnin like ass.. i need the ecu and some sensors changed to make the motor run smooth. if anyone can help call me 416 890 5102 gil (toronto) thanks:smile:
|
Originally Posted by Hayata
guys do u know anyone that specializes mx3 with klze motors..?? everything runs on the car but i think its runnin like ass.. i need the ecu and some sensors changed to make the motor run smooth. if anyone can help call me 416 890 5102 gil (toronto) thanks:smile:
ecu you need is the KL31 ECU mass airflow sensor you need is a JE50 VAF |
Originally Posted by ProbeGt
ecu you need is the KL31 ECU
mass airflow sensor you need is a JE50 VAF |
IT RUns perfectly well with a klde parts:
- 93-94 Probe/MX6 V6 ecu and VAF also benefits large from the MS08 Curved neck square port manifold. If u run your stock mx3 1.8 L Manifold it will run real rich and not run so smooth but still run. yer best bet is to obtain a V6 USDM probe or mx6 ECU and VAF make sure its from 93-94 cuz 96 and up are all ODB2 matt |
Originally Posted by msequence
IT RUns perfectly well with a klde parts:
- 93-94 Probe/MX6 V6 ecu and VAF also benefits large from the MS08 Curved neck square port manifold. If u run your stock mx3 1.8 L Manifold it will run real rich and not run so smooth but still run. yer best bet is to obtain a V6 USDM probe or mx6 ECU and VAF make sure its from 93-94 cuz 96 and up are all ODB2 matt |
good call,
ill keep my eyes out for one. check these: ONPOC 2.0 - Coming Soon XOOPS Site - News http://www.mx6.com/forums/ |
i have a ZE and i chipped my own ECU, all you need is a 1 dollar socket, a kl07(93 or 94 probe or mx6) ECU and a 12 dollar eprom and someone who can burn it for you, or a shop in town that will do it for you. So it cost me 13 bucks for my kl31 :) and you already have a JE50.
And yea, on the precidia if you can run the eunos intake it would be much better then the tiny little kl08 manifold. And yea it will run with the 93-94 probe/mx ecu/vaf but it doesn't run as well, i ran mine for a few months before i decided to chip my ecu and there was a noticeable difference. |
Originally Posted by Matt93Gt
i have a ZE and i chipped my own ECU, all you need is a 1 dollar socket, a kl07(93 or 94 probe or mx6) ECU and a 12 dollar eprom and someone who can burn it for you, or a shop in town that will do it for you. So it cost me 13 bucks for my kl31 :) and you already have a JE50.
And yea, on the precidia if you can run the eunos intake it would be much better then the tiny little kl08 manifold. And yea it will run with the 93-94 probe/mx ecu/vaf but it doesn't run as well, i ran mine for a few months before i decided to chip my ecu and there was a noticeable difference. |
Mx-3.com alot of them are always for sale on there. I had one like not even a week ago but sold it, usually go for about $200 for a KL31/36. I do have an extra Milliena Intake manifold though, if your looking for one.
|
If you had a v6 in your mx3 before ....you already have a je50 maf. So all you need is the computer the KL31 or KL36. I will keep my eye open for one.
|
All times are GMT -4. The time now is 05:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands