Hayata

guys do u know anyone that specializes mx3 with klze motors..?? everything runs on the car but i think its runnin like ***.. i need the ecu and some sensors changed to make the motor run smooth. if anyone can help call me 416 890 5102 gil (toronto) thanks

ProbeGt

iTrader: (1)

ecu you need is the KL31 ECU


mass airflow sensor you need is a JE50 VAF

Hayata

thanks do i need anything else??????? wheres a good deal to get those ??

msequence

iTrader: (1)

IT RUns perfectly well with a klde parts:

- 93-94 Probe/MX6 V6 ecu and VAF

also benefits large from the MS08 Curved neck square port manifold. If u run your stock mx3 1.8 L Manifold it will run real rich and not run so smooth but still run.

yer best bet is to obtain a V6 USDM probe or mx6 ECU and VAF make sure its from 93-94 cuz 96 and up are all ODB2

matt

Hayata

thanks some peeps told me to stick with the jdm ecu kl31/36 and use my stock mass air flow sensor je50... but now im having a hard time looking for the ecu i checked ebay steep... $400+ need to buy that ecu~~!!!!

ProbeGt

iTrader: (1)

good call,


ill keep my eyes out for one.


check these:

ONPOC 2.0 - Coming Soon

XOOPS Site - News

http://www.mx6.com/forums/

Matt93Gt

i have a ZE and i chipped my own ECU, all you need is a 1 dollar socket, a kl07(93 or 94 probe or mx6) ECU and a 12 dollar eprom and someone who can burn it for you, or a shop in town that will do it for you. So it cost me 13 bucks for my kl31 and you already have a JE50.

And yea, on the precidia if you can run the eunos intake it would be much better then the tiny little kl08 manifold.

And yea it will run with the 93-94 probe/mx ecu/vaf but it doesn't run as well, i ran mine for a few months before i decided to chip my ecu and there was a noticeable difference.

Hayata

wow thats damn cheap.. well i got a curved neck klze... for mx3s the brake booster is in the way curved neck klze intake would be right. well yeah i didnt swap the motor reusing the k8 intake manifold i totally junked that motor lol i got the one on the right. message me for ur cell i wanna talk more about a home made kl36ecu and yeah the price is right lol

KURPTK

Mx-3.com alot of them are always for sale on there. I had one like not even a week ago but sold it, usually go for about $200 for a KL31/36. I do have an extra Milliena Intake manifold though, if your looking for one.

jdm_mx6

If you had a v6 in your mx3 before ....you already have a je50 maf. So all you need is the computer the KL31 or KL36. I will keep my eye open for one.