SR20 Swap?
 

how much does an SR20 swap cost? if it cost too much i will just go kat.

It depends. Are you going to do the swap yourself? Or get a shop to do it for you?

i was planning on getting a shop to do it for me.

oh and how long would it take approximatly

you will need to budget around $5000 for it, the motor about $2500-5000 for the motor and another $1500 for the instal and then about another $1000 for other parts.

And depending how hard they work on it and who is doing it, 2 days to a week.

wow, pretty pricey! what parts would i need other than engine, tranny, ecu, and guages?

thanks! :)

Intercooler and misc parts, the wireing is expencive since you need to move the ecu to the other side and also the bottom and top harnesses dont mesh.

Btw, Dont think of the Kat as a budget choice, because it will end up blowing your motor

My friend had a SR20DET GTIR swapped in his 02 sentra gxe. He got the motor for like $2250 plus $1100 for the transmission, $1250 install, and $1150 for extra parts (such as new motor mounts, transmission mounts, harness, wiring, misc.). He was lucky enough however to get a JDM front clip with his motor thrown in for free which reduced his costs not only cause it was free but because he was able to resell some stuff.

Either way your looking at $4500-$5000 for the motor, transmission, ecu, harness, and any other misc. expense or $6000-$7000 for everything plus install.

wow thanks, i didnt know the whole setup could cost that much!

Join s o n 2 4 0 s x . c a (I think your a member already, I cant remember).
Buy a engine and guys on that club will gladly help you install it. Its actually one of the easiest swaps you'll ever do. Don't let anyone tell yo otherwise. If you need help with anything ask me or someone on s o n 2 4 0 .

Definately easier for the person doing the swap if you have the front clip.
Buy from Varun (on SON), and I'm sure he will find someone to install it for you.

i am already a member of ******, but i would do a swap myself (with help) if i could but i dont have a shop or engine stands of any sort or any electrical skills.

you need a one person garage, Princess auto for stands and hoists and make a friend who is good with wiring, Just remember, with motors, whatever you do dont take short cuts, they cost in the end.

What car are you doing the SR20 swap into? 240sx? Sentra? Miata? Locost? They fit into all sorts of cars...

List Of Parts Included
- Complete Motor
- Block
- Head
- Intake Manifold
- Exhaust Manifold
- Sensors
- Fuel Rail
- Injectors
- Cam Angle Sensor
- Throttle Body
- Alternator
- Starter
- Ignition Wires
- Pulleys
- Turbo manifold
- Turbocharger

- 5-Speed RWD Transmission

- Computer(ECU)

- Wiring Harness(complete)

- Ignitor Chip

for all the parts u are looking at about 2300$

blacktop or redtop?