1st gen RX7 project car.. CHEAP!
Thread Starter
~~ Hardcore Newb ~~
Joined: Feb 2005
Posts: 105
From: Brampton
Rep Power: 774 
1st gen RX7 project car.. CHEAP!
Selling for a friend..
1978 RX7 (first year of the RX7)
The car was purchased off the original owner during the summer for completion, but now need room in driveway. The car has LOTS of excellent modifications. Originally, 1st generation RX7s came with a 12A motor (1.2 litre and not very powerful) This RX7 has a 13B.
The body is in excellent condition, paint is a bit faded though. There is a bit of surface rust under the rear bumper and a bit on the front fender which is also dented. There is no holes in the floor or in carpet, the dash board and guage cluster is in excellent condition.. guage cluster reads 82,000kms. The car was apparently very fast before the seals went in the motor.
The good / Modifications:
Lowering springs
Koni Shocks
13B motor
Lightened flywheel
Centreforce clutch
Weber Carb
Cone filter
Strut tower brace
Custom rear spoiler
Bigger exhaust
Mint Body (has been rust sprayed for many years)
The Bad:
CAR DOESN'T RUN, Motor needs new seals
Couple areas with surface rust
Keys are missing
Car only comes with 3 wheels
Driver seat is ripped, both seats are a bit stained
The car is a perfect project for the track, or even to just get running again and drive it on the street.... or dropping a 350 V8 in it
Price: $900 obo
Located in Brampton
Must be seen to appreciate!
Call Mitch @ 416 804 9531
e-mail me for pics... impulsive_rs@hotmail.com
1978 RX7 (first year of the RX7)
The car was purchased off the original owner during the summer for completion, but now need room in driveway. The car has LOTS of excellent modifications. Originally, 1st generation RX7s came with a 12A motor (1.2 litre and not very powerful) This RX7 has a 13B.
The body is in excellent condition, paint is a bit faded though. There is a bit of surface rust under the rear bumper and a bit on the front fender which is also dented. There is no holes in the floor or in carpet, the dash board and guage cluster is in excellent condition.. guage cluster reads 82,000kms. The car was apparently very fast before the seals went in the motor.
The good / Modifications:
Lowering springs
Koni Shocks
13B motor
Lightened flywheel
Centreforce clutch
Weber Carb
Cone filter
Strut tower brace
Custom rear spoiler
Bigger exhaust
Mint Body (has been rust sprayed for many years)
The Bad:
CAR DOESN'T RUN, Motor needs new seals
Couple areas with surface rust
Keys are missing
Car only comes with 3 wheels
Driver seat is ripped, both seats are a bit stained
The car is a perfect project for the track, or even to just get running again and drive it on the street.... or dropping a 350 V8 in it
Price: $900 obo
Located in Brampton
Must be seen to appreciate!
Call Mitch @ 416 804 9531
e-mail me for pics... impulsive_rs@hotmail.com
Junior GTcars Poster
Joined: Feb 2005
Posts: 349
From: Toronto,Ontario
Rep Power: 778
uuhhh its a first gen.......
can you e-mail pics 2 soca_monarch@hotmail.com I'll post em 4 u
can you e-mail pics 2 soca_monarch@hotmail.com I'll post em 4 u
GTcars Regular
Joined: Feb 2005
Posts: 1,437
From: Brampton
Rep Power: 0 
Originally Posted by Nelly
uuhhh its a first gen.......
can you e-mail pics 2 soca_monarch@hotmail.com I'll post em 4 u
can you e-mail pics 2 soca_monarch@hotmail.com I'll post em 4 u
first gen, even lighter
~~ Hardcore Newb ~~
Joined: Apr 2005
Posts: 46
Rep Power: 765
interested if you can let it go for half what you are asking
otherwise would you consider parting the rear spoiler and the strut tower brace
let me know
i also saw the add on rx7club.com is that the owner posting there?
otherwise would you consider parting the rear spoiler and the strut tower brace
let me know
i also saw the add on rx7club.com is that the owner posting there?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)