B-series Parts Galore|jg|hondata|acl|hastings|oem|aem|ctr
Thread Starter
Average GTcars Poster
Joined: Apr 2005
Posts: 430
From: london ontario, canada
Rep Power: 0 
B-series Parts Galore|jg|hondata|acl|hastings|oem|aem|ctr
CAM GEARS SOLD!!!!!!!!!!!!!
ACL B18A/B/B20 ROD/MAIN/THRUST BEARINGS --- BRAND NEW
$120.00 for the kit!
HONDATA B18A/B18B INTAKE GASKET---BRAND NEW
$70.00
HASTINGS B-SERIES PISTON RINGS---BRAND NEW
-Perfect piston rings for a rebuild and they have a very high reputation. THEY WORK ON ALL B-series 1.8L engines!
$120.00
CTR N1 Crank Pulley --- USED BUT IN MINT CONDITION
-Bought on any B-series engine...runs only alternator belt and weighs about 2lb as opposed to a factory 4lb pulley
$80.00
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00
*** This is NOT the intake, but very similar to it...its a 1-peice unit. I can't get a pic of it at this time.
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00
.
.
.
.
.
***These are ONLY quality parts...DO NOT LOWBALL ME with **** offers please.
Located in London Ontario
Will ship at buyers expense
PM for quick response!
ACL B18A/B/B20 ROD/MAIN/THRUST BEARINGS --- BRAND NEW
$120.00 for the kit!
HONDATA B18A/B18B INTAKE GASKET---BRAND NEW
$70.00
HASTINGS B-SERIES PISTON RINGS---BRAND NEW
-Perfect piston rings for a rebuild and they have a very high reputation. THEY WORK ON ALL B-series 1.8L engines!
$120.00
CTR N1 Crank Pulley --- USED BUT IN MINT CONDITION
-Bought on any B-series engine...runs only alternator belt and weighs about 2lb as opposed to a factory 4lb pulley
$80.00
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00
*** This is NOT the intake, but very similar to it...its a 1-peice unit. I can't get a pic of it at this time.
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00
.
.
.
.
.
***These are ONLY quality parts...DO NOT LOWBALL ME with **** offers please.
Located in London Ontario
Will ship at buyers expense
PM for quick response!
Last edited by mr.rhtuner; Mar 28, 2007 at 10:43 AM.
Thread Starter
Average GTcars Poster
Joined: Apr 2005
Posts: 430
From: london ontario, canada
Rep Power: 0
Originally Posted by B16A2
interested in intake.. will you take 120 if i pick it up this weekend??
the lowest I will take is 140 if you come down and pick it up
Cam gears pending sale!
OIL PUMP SOLD!
Oil Pump Sold!
Cam Gears Pending Sale!
Last edited by mr.rhtuner; Mar 27, 2007 at 02:16 PM. Reason: Automerged Doublepost
Thread Starter
Average GTcars Poster
Joined: Apr 2005
Posts: 430
From: london ontario, canada
Rep Power: 0
Bump This Up!!!!!!!!!
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
Bump This Up!!!!!!!!
Up This Goes Dammit!!!!!!!
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
Bump This Up!!!!!!!!
Originally Posted by mr.rhtuner
Bump This Up!!!!!!!!!
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
Bump This Up!!!!!!!!
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
Bump This Up!!!!!!!!
Last edited by mr.rhtuner; Apr 1, 2007 at 01:05 PM. Reason: Automerged Doublepost
Thread Starter
Average GTcars Poster
Joined: Apr 2005
Posts: 430
From: london ontario, canada
Rep Power: 0
Up Tttttttttttttttttttt
ACL B18A/B/B20 ROD/MAIN/THRUST BEARINGS SOLD!!!!!!!
ACL B18A/B/B20 ROD/MAIN/THRUST BEARINGS SOLD!!!!!!!
Last edited by mr.rhtuner; Apr 3, 2007 at 04:28 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
djtrini
Car Parts For Sale
4
Jun 26, 2008 09:41 AM
Hatch2k
Car Parts For Sale
3
Jan 18, 2008 08:54 PM
mr.rhtuner
Car Parts For Sale
6
Apr 15, 2007 02:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)