MK2 GTI dash removal.
13 Attachment(s)
This is going to cover how to remove the MK2 dash.
First, tools. 1. #2 Phillips screwdriver. Attachment 168781 2. Various pliers, or cutters. Attachment 168782 Attachment 168783 Attachment 168784 3. Slot screwdriver. Great for everything. Attachment 168785 4. 10mm socket, for bolts in the rain tray. Attachment 168786 OK, on to how to. First of all, remove the bolts under the hood. Remove the rain tray, and find them. Here's where they are. Attachment 168787 Attachment 168788 And the drivers side. This one is a pita. You can reach it through the wiper assembly, if you've got the extension pictured above. If you don't, well, good luck. Just go buy the extension, and the deep 10mm socket. You're going to need to hold down the wiring harness, and feed the socket, through the wiper arms. You can see the bolt, if you look, but make sure your engine bay is somewhat clean, or you'll look like I did, with dirt all over my jacket. https://i9.photobucket.com/albums/a5...removal003.jpg Attachment 168789 Next, is these 2 screws. In alot of the other threads I found, people said these were 8mm, or whatever, on my car, they were #2 Phillips screws. Attachment 168790 Attachment 168791 You may not think of this, but you will need to do it. Remove the steering wheel. I used a 15/16" socket, don't ask, it fit. Attachment 168792 If your car is equipped with it, the console, and knee bar will need to be removed, they're held in with phillips screws, and 2 8mm bolts. Unfortunatley, I had pulled my a few weeks ago, and I didn't think to take pics. When you're done, you have a dash, and a goofy looking interior. Attachment 168793 |
nice post :smilie_da
|
All times are GMT -4. The time now is 09:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands