Rep Power: 967

I want to get my dad some new speakers for his vette and today i took the back grille off and found he had puny 3" infinity speakers in a 6x9" spot. theres a bracket to convert to a smaller size already installed. so then i took the grille off the front speakers in the doors and found factory bose 3.5" speakers. so i know now i have to buy some 6x9s and some 3.5s, but the factory 3.5s have 3 screws. everything i can find has either 2 or 4. is there a certain type with 3 or do i need some sort of bracket like the rear has?

 
Rep Power: 1125

just use 3 it won't matter with such a small speaker, heck even 2 won't hurt, instead of 6x9 garbage sounding speakers (none sound good) get 6 1/2 s and make an adapter

 
Rep Power: 967

no thats not what it is...the screw pattern is like this:
.
. .

 
Rep Power: 967

hold on its being gay...

 
Rep Power: 1125

you don't have to use all the holes make it fit

 
Rep Power: 967

 
Rep Power: 967

see what i mean now...

 
Rep Power: 1125

 
Rep Power: 1125

all speakers have slotted holes so the can fit many configurations, 3.5's are cheap (I got a set for 5 bucks once) get a cheapy set and see what happens

 
Rep Power: 922

i have 1 screw holding each of my 6x9's.lol. thats what came in the car and i couldnt get them to line up right. so since they're on the B pillar they jsut hang from one screw at the top of each.lol

 
Rep Power: 967

looks like a flange

 
Rep Power: 1125

use plexi and make a freaking bracket

 
Rep Power: 967

awe. i suck with custom stuff. you remember my "off-road cat pipe".

 
Rep Power: 1125

but that's easy, but jb weld would work too

 
Rep Power: 967

whats jb weld? and how hard is plexi to work with? where do i buy plexi?