7"TFT LCD Indash Monitor, Bazooka Bass Tubes, Alpine Amp
02-09-2006, 02:58 AM
#1
~~ Hardcore Newb ~~
Thread Starter
Join Date: Apr 2005
Posts: 127
Rep Power: 701 
Bazooka Bass Tubes, Alpine Amp
Hey guys I got some car audio I'd like to sell... Located East GTA.. 
Subwoofers and Amplifier
2 Bazooka Passive Bass Tubes w/ 200w rms subs $200>$180!
-Subs are about 1.5 years old, still pound hard
-Tubes are in great shape
-These tubes also come with Bazooka UMS Mounting Brackets ($75 Value)
-Pictures to come soon
Specs: T102 Specifications
Bass Tubes Enclosure Computer aligned bass reflex-ducted port.
Woofer Size 10"
Voice Coil Size 1.5" high power / high temp
Magnet Size 28 oz.
Frequency Response 39-1500Hz
Efficiency 104dB*
Power Handling 6 to 200 watts/channel
T102 Dimensions 20.75" X 10.3" X 12.2"
Weight 23 lbs.
Impedance 4 ohms**
PICTURE HERE!!!
Alpine MRP-M200 300w/max Vpower Mono Block Amp $50 obo
-Amp is in grood shape and pounds the Bazooka tubes.
-Amp has salt stain on the bottom but it does not affect amp's performance
-Pictures to come
Specs: MAX Power (at 14.4V,EIAJ)
Per channel into 2 ohms - 300W x 1
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 4 ohms -150W x 1 (0.08% THD)
Per channel into 2 ohms - 200W x 1 (0.3%)
Bass Engine® Bass EQ (Variable) - 50Hz Variable (0 - +12dB)
Crossover Network - Variable 50Hz - 200Hz LP (18dB/oct)
General
Frequency Reponse - 20Hz-200Hz (+0,-3dB)
Signal to Noise (S/N) - 100dBA (referenced to rated power)
Input Sensitivity (for rated power) - 200mV ~ 4.0V
Slew Factor -greater than 5
Input Impedance - 10k ohm
Speaker Impedance - 4 or 2 ohms(stereo), 4 ohms(bridged)
Power Requirements - 14.4V DC (11V to 16V)
Heat Sink (WxHxD) - 230mm x 58mm x 230mm
Foot Sink (WxHxD) - 250mm x 58mm x 230mm
Weight - 2.6kg(5lbs. 12oz.)
PICTURE HERE!
PM me or email djtakeda@rogers.com!! THANKS!!!!
Subwoofers and Amplifier
2 Bazooka Passive Bass Tubes w/ 200w rms subs $200>$180!
-Subs are about 1.5 years old, still pound hard
-Tubes are in great shape
-These tubes also come with Bazooka UMS Mounting Brackets ($75 Value)
-Pictures to come soon
Specs: T102 Specifications
Bass Tubes Enclosure Computer aligned bass reflex-ducted port.
Woofer Size 10"
Voice Coil Size 1.5" high power / high temp
Magnet Size 28 oz.
Frequency Response 39-1500Hz
Efficiency 104dB*
Power Handling 6 to 200 watts/channel
T102 Dimensions 20.75" X 10.3" X 12.2"
Weight 23 lbs.
Impedance 4 ohms**
PICTURE HERE!!!
Alpine MRP-M200 300w/max Vpower Mono Block Amp $50 obo
-Amp is in grood shape and pounds the Bazooka tubes.
-Amp has salt stain on the bottom but it does not affect amp's performance
-Pictures to come
Specs: MAX Power (at 14.4V,EIAJ)
Per channel into 2 ohms - 300W x 1
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 4 ohms -150W x 1 (0.08% THD)
Per channel into 2 ohms - 200W x 1 (0.3%)
Bass Engine® Bass EQ (Variable) - 50Hz Variable (0 - +12dB)
Crossover Network - Variable 50Hz - 200Hz LP (18dB/oct)
General
Frequency Reponse - 20Hz-200Hz (+0,-3dB)
Signal to Noise (S/N) - 100dBA (referenced to rated power)
Input Sensitivity (for rated power) - 200mV ~ 4.0V
Slew Factor -greater than 5
Input Impedance - 10k ohm
Speaker Impedance - 4 or 2 ohms(stereo), 4 ohms(bridged)
Power Requirements - 14.4V DC (11V to 16V)
Heat Sink (WxHxD) - 230mm x 58mm x 230mm
Foot Sink (WxHxD) - 250mm x 58mm x 230mm
Weight - 2.6kg(5lbs. 12oz.)
PICTURE HERE!
PM me or email djtakeda@rogers.com!! THANKS!!!!
Last edited by djthouseofboom; 02-13-2006 at 05:21 PM. Reason: monitor sold
Thread
Thread Starter
Forum
Replies
Last Post
donjuanle
Miscellaneous Stuff For Sale
1
05-24-2007 10:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
