nixon

I recently put on a body kit and the passenger side skirt is pushing the fender and now when i open the passenger door it hits the fender. Does anyone know how to fix this problem?

Mike Jones

iTrader: (1)

Can you take some pictures of it so we know exactly what you're talking about? It'll be easier for us to help out.

paarman97maro

yeah i agree pics would help.

NoRiceInside

your car has been in an accident. sell it. fast.

ITSA6

there is an alignment tab under the car you must have bent a body kit wouldn't do that. just take some vise grips to it and pull your car back into shape.....


i think this is what you are talking about

MeenZ28

You dont know that. Mr. Optimist.

Mike Jones

iTrader: (1)

If it's the front fender it could be someone jacked it up wrong. Tons of FBodies have had that and then their fender's stick out a little afterwards.

ITSA6

bend the tab..........

paarman97maro

yea mine does on the passenger side... but i think mine was also in an accident.

NoRiceInside

mine does that too. but not cuza the accident it was in, cuz i tried to roll it up onto wheel ramps when it had no trans. my friend and i overshot it and it went over the other side. smashed that panel yall are talking about. i fixed it, but the drivers side doesnt line up still...

nixon

Here are some pics of the problem it only happens near the bottom sorry i took so long
Attachment 6027

Attachment 6028

paarman97maro

take them from farther away

98CamaroZ28

yea my rocker panels were all messed up...luckliy it was fixed...still P!ssed though...

Mike Jones

iTrader: (1)

It's the jacking point we were all talking about. Get some vice grips, get under there and fix it.

NoRiceInside

based on the first pic, it looks fine. mine does the same thing. no big shakes.