Rep Power: 705

I recently put on a body kit and the passenger side skirt is pushing the fender and now when i open the passenger door it hits the fender. Does anyone know how to fix this problem?

 
Rep Power: 0

Can you take some pictures of it so we know exactly what you're talking about? It'll be easier for us to help out.

 
Rep Power: 1093

yeah i agree pics would help.

 
Rep Power: 967

your car has been in an accident. sell it. fast.

 
Rep Power: 822

there is an alignment tab under the car you must have bent a body kit wouldn't do that. just take some vise grips to it and pull your car back into shape.....


i think this is what you are talking about

 
Rep Power: 971

You dont know that. Mr. Optimist.

 
Rep Power: 0

If it's the front fender it could be someone jacked it up wrong. Tons of FBodies have had that and then their fender's stick out a little afterwards.

 
Rep Power: 822

bend the tab..........

 
Rep Power: 1093

yea mine does on the passenger side... but i think mine was also in an accident.

 
Rep Power: 967

mine does that too. but not cuza the accident it was in, cuz i tried to roll it up onto wheel ramps when it had no trans. my friend and i overshot it and it went over the other side. smashed that panel yall are talking about. i fixed it, but the drivers side doesnt line up still...

 
Rep Power: 705

Here are some pics of the problem it only happens near the bottom sorry i took so long
Attachment 6027

Attachment 6028

 
Rep Power: 1093

take them from farther away

 
Rep Power: 785

yea my rocker panels were all messed up...luckliy it was fixed...still P!ssed though...

 
Rep Power: 0

It's the jacking point we were all talking about. Get some vice grips, get under there and fix it.

 
Rep Power: 967

based on the first pic, it looks fine. mine does the same thing. no big shakes.