Fs: B16a Obd1 P30 Ecu & Intake Manifold
12-31-2006, 03:51 PM
#1
Junior GTcars Poster
Thread Starter
Join Date: Feb 2005
Posts: 270
Rep Power: 707 
Fs: B16a Obd1 P30 Ecu & Intake Manifold
Hey guys, I just upgraded to an AEM EMS, so I have some used stuff that I want to unload. Please read the notes that are under the pictures of each item for important details.
If you are interested in any of these items, pm me, and we can talk. Items are located in Mississauga, I won't ship, and the prices are firm.
$140.00
This USDM P30 OBD1 ECU came out of a 1995 Honda del Sol VTEC. This is the proper ECU for the Honda B16A engine. Most people just chip and modify a P28, which works, but you don't get the Knock Sensor which is integrated into the P30 ECU via a daughterboard. This ECU was socketed and chipped by Paul @ Neetronics. It contains software for my Turbo B16A running at 12PSI with 440cc injectors. You *could* use this program if you had a similar setup, but I would NOT recommend it, as every engine is unique. So, I guess what I'm saying is that its up to you. You could remove the chip and run your own software, have Paul re-tune it to your own spec, or remove the chip entirely and convert it back to stock form. Either way, I'm not responsible if you f!ck up your engine!
$40.00
This is the MAP sensor you need, if you want to run the above ECU with Neetronics software. Basically, Paul @ Neetronics makes his own MAP Sensors, because his software is proprietary. He sells this sensor to every customer that he retunes Honda ECU's for boosted applications.
$40.00
I upgraded to a Skunk2 manifold and throttle body, and that's my only reason for selling this one. I've cleaned it up as best I could, and it includes the stock throttle body, as well as the stock map sensor. The only things missing are the fuel rail studs, TPS, and IACV
Thanks for looking, PM me with questions!
If you are interested in any of these items, pm me, and we can talk. Items are located in Mississauga, I won't ship, and the prices are firm.
$140.00
This USDM P30 OBD1 ECU came out of a 1995 Honda del Sol VTEC. This is the proper ECU for the Honda B16A engine. Most people just chip and modify a P28, which works, but you don't get the Knock Sensor which is integrated into the P30 ECU via a daughterboard. This ECU was socketed and chipped by Paul @ Neetronics. It contains software for my Turbo B16A running at 12PSI with 440cc injectors. You *could* use this program if you had a similar setup, but I would NOT recommend it, as every engine is unique. So, I guess what I'm saying is that its up to you. You could remove the chip and run your own software, have Paul re-tune it to your own spec, or remove the chip entirely and convert it back to stock form. Either way, I'm not responsible if you f!ck up your engine!
$40.00
This is the MAP sensor you need, if you want to run the above ECU with Neetronics software. Basically, Paul @ Neetronics makes his own MAP Sensors, because his software is proprietary. He sells this sensor to every customer that he retunes Honda ECU's for boosted applications.
$40.00
I upgraded to a Skunk2 manifold and throttle body, and that's my only reason for selling this one. I've cleaned it up as best I could, and it includes the stock throttle body, as well as the stock map sensor. The only things missing are the fuel rail studs, TPS, and IACV
Thanks for looking, PM me with questions!
01-29-2007, 03:05 PM
#7
ecu very interested
Hey I need an ecu right away. So if I remove the chip do i have to program the ecu again or does it go back to stock settings. Let me know. I am running a si ecu programed on my b16a obd1 engine and i am burning way to much fuel and loosing horsepower. you ca email me at jasonsousa23@hotmail.com
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
NVS_Whips
Want To Buy
0
04-09-2008 11:56 PM
93-hatch-back
Car Parts For Sale
0
08-27-2005 11:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)