¿will a 3.8 engine fit in a camaro with a 3.4?
#1
¿will a 3.8 engine fit in a camaro with a 3.4?
i have a 1995 3.4 Camaro and i am thinking about buying another Camaro without an engine but i want to put a 3.8, not a 3.4 into it. but i want to know if the engines will swap easily and if it can fit, how much work and what type of modifications would have to be done? so basically can i put a 3.8 engine into a 3.4 Camaro ? thanx.....
#2
they put 3.8 in 1996 camaro which is the same as a 1995 which had the 3.4. Honestly i can not give you a definate answer but i would say it is possible. Transmission may run you into trouble though i don't know
#6
It will fit in the car, but the transmission will not bolt up. If you have a 5 speed you could probably get the correct bellhousing. If its an A4, you will need a trans that will bolt to the 3.8.
The 3.8 is a 90 degree V6, it uses thae same belhousing design as a SBC. The 3.4 is a 60 degree V6, it has a much narrower bellhousing.
I am pretty sure that you will also have to get the correct wiring and ECM for a 3.8.
Are you getting a deal on a 3.8?
You may be able to swap a v8 into the car for thae same amount as putting in a 6 that was not origionally in the car.
The 3.8 is a 90 degree V6, it uses thae same belhousing design as a SBC. The 3.4 is a 60 degree V6, it has a much narrower bellhousing.
I am pretty sure that you will also have to get the correct wiring and ECM for a 3.8.
Are you getting a deal on a 3.8?
You may be able to swap a v8 into the car for thae same amount as putting in a 6 that was not origionally in the car.
Thread
Thread Starter
Forum
Replies
Last Post
michanic220
Other Honda Models
1
04-16-2008 03:07 AM
javi_oso3
honda / acura
1
11-13-2007 01:32 PM
reaction_time_is_lost
honda / acura
0
08-07-2007 04:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)