Gear question
Thread Starter
GTcars - Post God !
Joined: Aug 2006
Posts: 3,119
From: North Carolina
Rep Power: 783 
Gear question
Do they make a 3.90 gear for our cars?
I've got the 4.10's in mine right now, and I think its a little too steep for that T-5, so I figured while I was replacing my posi i'd replace the 4.10's with some 3.90's if they make them.
I've got the 4.10's in mine right now, and I think its a little too steep for that T-5, so I figured while I was replacing my posi i'd replace the 4.10's with some 3.90's if they make them.
~~ Hardcore Newb ~~
Joined: Apr 2006
Posts: 47
From: swanton
Rep Power: 733 
Thread Starter
GTcars - Post God !
Joined: Aug 2006
Posts: 3,119
From: North Carolina
Rep Power: 783
I wish.
The bellhousing is wayyyy too different. A t56 wont even come close to mounting up. If that had been the case, i'd just get a t56 a long time ago.
But on another note, I think my output shaft bearing is going out anyway. Im getting a whirring grinding noise when im at 2k rpm+ and im off the throttle and clutch. And as far as I know, you cant get an output shaft bearing seperate from the tranny.
The bellhousing is wayyyy too different. A t56 wont even come close to mounting up. If that had been the case, i'd just get a t56 a long time ago.
But on another note, I think my output shaft bearing is going out anyway. Im getting a whirring grinding noise when im at 2k rpm+ and im off the throttle and clutch. And as far as I know, you cant get an output shaft bearing seperate from the tranny.
Thread
Thread Starter
Forum
Replies
Last Post
RANDY F
honda / acura
3
Nov 6, 2007 08:42 PM
Ted
Honda Mailing List
0
Jul 21, 2004 10:04 PM
Jehu
Honda Mailing List
0
Jan 28, 2004 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
