Sparkplugs and Wires
#6
Everyone seems pretty happy with the Taylor wires.. out of all the wires here, what would be your top 3 arch? I am always interested to hear your opinion. http://www.ftpp.net/V6Ignition.htm#Wires
#7
I've had good luck with accel, bosche, and ac (they have the same resistance reading as the high dollar ones usually) nology is supposed to be good stuff I never tried them, mallory seemed about the same as the msd the ends came off when I tried to read plugs
#8
TPiS should have a decent set of wires for your LS1- and Bosch plugs have always been good for me. I know NGK's work the best in my sled, so I know they make decent 2 stroke plugs, I would assume that they make good plugs for cars too.
Not that this really applies, I tried a set of Denso's in my sled and I fouled them out in the first ten miles. I am the type of person who once a brand is junk for me it takes some convincing to tell me otherwise.
Not that this really applies, I tried a set of Denso's in my sled and I fouled them out in the first ten miles. I am the type of person who once a brand is junk for me it takes some convincing to tell me otherwise.
#9
Originally Posted by RICEKLLR..breathes again-
TPiS should have a decent set of wires for your LS1-
#10
[QUOTE=camaro94]Everyone seems pretty happy with the Taylor wires.. out of all the wires here, what would be your top 3 arch? I am always interested to hear your opinion.
would the 8.5mm MSD wires or the 8mm Taylor wires be better ?
would the 8.5mm MSD wires or the 8mm Taylor wires be better ?
#13
=O. ill contribute to this old *** thread i gues. i have bosch plugs which are ok i guess but im going to change them again once i start driving my car. my wires are mixed with some of my old ones and some new bosch ones b/c the bosch ones wouldn't all work with my headers :banghead: