NoRiceInside

Well I started Thursday but just got some pictures today. I'm going to port-match these heads and do a valve job, then polish the combustion chamber and intake/exhaust ports. When I'm done I'm going to buy a cam, lifters, pushrods, 1.6 roller rockers, and new springs and retainers. Then I'm going to swap these heads with the stockers and install the cam and new valvetrain.

So anyway this will be a little picture diary to show my progress.

NoRiceInside

Since winter break starts next week I probably won't get to the actually die grinding until after i get back to school

1BADVETTE

are you doing all the work yourself? good luck heh, make sure everything is accurate Can't wait to see what you lay down when you get all of this stuff done, it'll be one fast 6, that's for sure.

69z-28

wait, why are there only 3 spark plugs? lol jk yea dude, looks good. your doing quite a bit of work. what are you at school, is that why? good luck with it.

NoRiceInside

yeah its my senior project.

69z-28

cool. o yea, dont wear white while working on heads.lol

RFF

Sweet.

95BlackZ

Looking good man just make sure all your stuff is accurate and take your time I changed my head on my V6 i used to have it takes a little while good luck

JimmyFrance

haha its funny your doing it in a white sweater.

97z2801ss

skippin the senior trip n goin strait to the sr project

XJonesyX

Good luck with it all.

camaro94

good luck

NoRiceInside

alright well now that i'm back in school i resumed my project. yesterday and today i cleaned the valves up.

here are some before and afters of the exhaust valves:




and some before and afters of the disgusting intake valves:

NoRiceInside

okay i finally got some real progress on my heads this week. i ordered the summit port and polishing kit and i started to polish the combustion chambers. the first pic is one of the chambers after the solvent tank and hasnt been polished yet. the second is one that has been:

XJonesyX