Head Work Picture Diary
Thread Starter
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967 
Head Work Picture Diary
Well I started Thursday but just got some pictures today. I'm going to port-match these heads and do a valve job, then polish the combustion chamber and intake/exhaust ports. When I'm done I'm going to buy a cam, lifters, pushrods, 1.6 roller rockers, and new springs and retainers. Then I'm going to swap these heads with the stockers and install the cam and new valvetrain.
So anyway this will be a little picture diary to show my progress.
So anyway this will be a little picture diary to show my progress.
Drama Queen
Joined: Nov 2004
Posts: 2,034
From: Maumelle, AR
Rep Power: 826
are you doing all the work yourself? good luck heh, make sure everything is accurate 
Can't wait to see what you lay down when you get all of this stuff done, it'll be one fast 6, that's for sure.
Can't wait to see what you lay down when you get all of this stuff done, it'll be one fast 6, that's for sure.
yea dude, looks good. your doing quite a bit of work. what are you at school, is that why? good luck with it.
Thread Starter
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967
alright well now that i'm back in school i resumed my project. yesterday and today i cleaned the valves up.
here are some before and afters of the exhaust valves:
and some before and afters of the disgusting intake valves:
here are some before and afters of the exhaust valves:
and some before and afters of the disgusting intake valves:
Thread Starter
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967
okay i finally got some real progress on my heads this week. i ordered the summit port and polishing kit and i started to polish the combustion chambers. the first pic is one of the chambers after the solvent tank and hasnt been polished yet. the second is one that has been:
