Rep Power: 740

I am looking for a full swap for my 95si coupe I need something that will last, have good pep to it and at a reasonable price. If anyone can help me out please do I want to get my car on the road in spring.. Thanks

 
Rep Power: 747

how much "pep" do you want and how much can u spend? thats all u have to figure out

 
Rep Power: 740

Im looking at anything from 2,500 to 4,000 with some good speed when needed im not racing the car just have to get there on time sometimes. Help me out if all possible. Thanks

 
Rep Power: 745

b18a are good at around 140 @ 6300 rpm, 121 lb/ft @ 5200 rpm it will give u some good "pep"! and are pretty cheap! and the b16a will give you some "pep" both of thoughs are pretty cheap. its if u know how to do it or get some one you know to do it way cheaper

 
Rep Power: 740

I know someone who can do the install but what i don't have is someone I can trust to sell me a engine and full kit needed to do a swap.

 
Rep Power: 747

ok, so the easiest, would be a b16, but it has low torque, but if u can get your hands on a b18b from a 94-95 integra (obd1 like ur car) u will get alot more torque for the money, so bang for buck i would do that, and it would be an easy install. I could easily give you a how 2 guide.

also look at this thread, its my buddy's 89 civ, (not much diff.) with the obd0 integra engine (b18a1) in it. (b18b1 is obd1 and would work well with ur car!)

http://gtcars.ca/online/showthread.php?t=16862

 
Rep Power: 779

theres an ls/vtec for sale in the FS section.. check it out.. you may be able to pick it up for $4000 or a tad more. Its been freshly built!

 
Rep Power: 740

Thanks for the info on the ls/vtec but thats not the engine for me but I would like to no what other vtec engine would be good for me anyone help out?thanks.

 
Rep Power: 747

well then look at these engine shops

http://www.sunrisejdmmotors.com/honda.php

http://www.fnf-motors.com/

http://www..com/home.php

so check those out, there tons of options there.

 
Rep Power: 774

Go with a GSR dude. I have a 95 Coupe as well. Check out how it turned out. Its on the last page. Enjoy.
Peace,
Jeff
http://www.cardomain.com/ride/751480

 
Rep Power: 762

hey Jeff, my buddy has a 94 si coupe and is wondering what he can put in it for a reasonable price but also he doesnt want to lose to me after he does the swap. he was thinkin B16 cause its cheap but for how much his cars wieghs (2600lbs) it would be pointless, how fast does ur car go, any 1/4 mile times with it yet? and around how much did the swap cost you?

 
Rep Power: 771

Gs-r All The Way If You Want A Nice Reliable Motor That Pulls Hard And Is Your Everyday Driver ...and If You Go B Series Get A 1.8