I have to get a drive axle and a ball joint replaced on my Honda Civic...what is a
~~ Hardcore Newb ~~
Joined: Jul 2008
Posts: 1
Rep Power: 0 
Ball Joints: Popping when turning/braking... car feels like its "rolling over" in corners. Movement in wheel/tire when pressing on the 12 and 6 oclock positions.
Wheel bearing: grinding noise when turning, louder as you go faster. Will be louder when turning in a direction that places more weight on the bad bearing. should make the sound when the car is jacked up.
Wheel bearing: grinding noise when turning, louder as you go faster. Will be louder when turning in a direction that places more weight on the bad bearing. should make the sound when the car is jacked up.
~~ Hardcore Newb ~~
Joined: Jul 2008
Posts: 1
Rep Power: 0
GEES guys if you can't give the guy an answer then don't post. 8 / .....
Your car is front wheel drive so the drive axle is the axle that drives the front wheels.. so you go... if you look under the front of the car you can see them going from the motor to the wheels.
The Ball joint is what hold the front wheels to the supension. there is an upper and a lower on both sides..
good luck
tim
Your car is front wheel drive so the drive axle is the axle that drives the front wheels.. so you go... if you look under the front of the car you can see them going from the motor to the wheels.
The Ball joint is what hold the front wheels to the supension. there is an upper and a lower on both sides..
good luck
tim
Thread
Thread Starter
Forum
Replies
Last Post
Miss Cream
Honda Prelude
0
May 17, 2008 07:37 PM
Ben Bowes
Honda Mailing List
8
Dec 9, 2003 08:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)