1988 CRX Tail light leaks
Guest
Posts: n/a
1988 CRX Tail light leaks
I had some body work done to the rear wheel wells on both sides. Since
I've had the car back, rain has leaked into the car via the right side
tail light. I suspect the body shop didn't get the gasket in right. I
took it back to them once but I think I'd be able to fix this myself.
Can I purchase new gaskets somewhere? Can I make these myself?
I've had the car back, rain has leaked into the car via the right side
tail light. I suspect the body shop didn't get the gasket in right. I
took it back to them once but I think I'd be able to fix this myself.
Can I purchase new gaskets somewhere? Can I make these myself?
Guest
Posts: n/a
Re: 1988 CRX Tail light leaks
Two options:
1. Buy new gaskets from www.slhonda.com or
http://www.hondaautomotiveparts.com/...catdisplay.jsp . Disassemble
tail light assembly (it's pretty self-evident). Install.
2. Disassemble tail light assembly. Clean old gaskets. Buy silicone caulking and
apply to both sides. Advantage: Cheaper. Disadvantage: When this next leaks,
cleaning off the old caulking may be a chore.
I went with option 2 about 2 years ago on my 1991 Civic. The repair is holding
fine.
"Dave Skipper" <das216@NOSPAMMYMAMMYadelphia.net> wrote
> I had some body work done to the rear wheel wells on both sides. Since
> I've had the car back, rain has leaked into the car via the right side
> tail light. I suspect the body shop didn't get the gasket in right. I
> took it back to them once but I think I'd be able to fix this myself.
> Can I purchase new gaskets somewhere? Can I make these myself?
1. Buy new gaskets from www.slhonda.com or
http://www.hondaautomotiveparts.com/...catdisplay.jsp . Disassemble
tail light assembly (it's pretty self-evident). Install.
2. Disassemble tail light assembly. Clean old gaskets. Buy silicone caulking and
apply to both sides. Advantage: Cheaper. Disadvantage: When this next leaks,
cleaning off the old caulking may be a chore.
I went with option 2 about 2 years ago on my 1991 Civic. The repair is holding
fine.
"Dave Skipper" <das216@NOSPAMMYMAMMYadelphia.net> wrote
> I had some body work done to the rear wheel wells on both sides. Since
> I've had the car back, rain has leaked into the car via the right side
> tail light. I suspect the body shop didn't get the gasket in right. I
> took it back to them once but I think I'd be able to fix this myself.
> Can I purchase new gaskets somewhere? Can I make these myself?
Guest
Posts: n/a
Re: 1988 CRX Tail light leaks
Two options:
1. Buy new gaskets from www.slhonda.com or
http://www.hondaautomotiveparts.com/...catdisplay.jsp . Disassemble
tail light assembly (it's pretty self-evident). Install.
2. Disassemble tail light assembly. Clean old gaskets. Buy silicone caulking and
apply to both sides. Advantage: Cheaper. Disadvantage: When this next leaks,
cleaning off the old caulking may be a chore.
I went with option 2 about 2 years ago on my 1991 Civic. The repair is holding
fine.
"Dave Skipper" <das216@NOSPAMMYMAMMYadelphia.net> wrote
> I had some body work done to the rear wheel wells on both sides. Since
> I've had the car back, rain has leaked into the car via the right side
> tail light. I suspect the body shop didn't get the gasket in right. I
> took it back to them once but I think I'd be able to fix this myself.
> Can I purchase new gaskets somewhere? Can I make these myself?
1. Buy new gaskets from www.slhonda.com or
http://www.hondaautomotiveparts.com/...catdisplay.jsp . Disassemble
tail light assembly (it's pretty self-evident). Install.
2. Disassemble tail light assembly. Clean old gaskets. Buy silicone caulking and
apply to both sides. Advantage: Cheaper. Disadvantage: When this next leaks,
cleaning off the old caulking may be a chore.
I went with option 2 about 2 years ago on my 1991 Civic. The repair is holding
fine.
"Dave Skipper" <das216@NOSPAMMYMAMMYadelphia.net> wrote
> I had some body work done to the rear wheel wells on both sides. Since
> I've had the car back, rain has leaked into the car via the right side
> tail light. I suspect the body shop didn't get the gasket in right. I
> took it back to them once but I think I'd be able to fix this myself.
> Can I purchase new gaskets somewhere? Can I make these myself?
Thread
Thread Starter
Forum
Replies
Last Post
yugioh m
Honda Accord
5
Dec 17, 2007 11:06 PM
kjones1200@yahoo.com
Hyundai Mailing List
5
Sep 2, 2007 05:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
