1989 Accord Front Upper Control Arm
Guest
Posts: n/a
1989 Accord Front Upper Control Arm
I replaced the upper control arm on my 1989 Accord, the ball joint was
shot. I also put in new bushings. The control arm and bushings were
after market (Moog). I re-assembled the control arm as per the shop
manual. Now I have a noise (sort of like a cracking) when the
suspension is flexed up and down on the side that was replaced. It
seems to be coming from the bushings. Has anybody experienced this
before ? I used chassis grease when I re-assembled the control arm.
Any help would be appreciated.
shot. I also put in new bushings. The control arm and bushings were
after market (Moog). I re-assembled the control arm as per the shop
manual. Now I have a noise (sort of like a cracking) when the
suspension is flexed up and down on the side that was replaced. It
seems to be coming from the bushings. Has anybody experienced this
before ? I used chassis grease when I re-assembled the control arm.
Any help would be appreciated.
Guest
Posts: n/a
Re: 1989 Accord Front Upper Control Arm
How did you install the bushings? You want to make sure that you don't
damage the flat side when installing them, or they can make noise... I
buggered up a pair recently when I got into a hurry, and they squeaked for a
little while.
"nospam" <nospam@nospam.com> wrote in message
news:410B9D88.DCFB908C@nospam.com...
> I replaced the upper control arm on my 1989 Accord, the ball joint was
> shot. I also put in new bushings. The control arm and bushings were
> after market (Moog). I re-assembled the control arm as per the shop
> manual. Now I have a noise (sort of like a cracking) when the
> suspension is flexed up and down on the side that was replaced. It
> seems to be coming from the bushings. Has anybody experienced this
> before ? I used chassis grease when I re-assembled the control arm.
> Any help would be appreciated.
>
damage the flat side when installing them, or they can make noise... I
buggered up a pair recently when I got into a hurry, and they squeaked for a
little while.
"nospam" <nospam@nospam.com> wrote in message
news:410B9D88.DCFB908C@nospam.com...
> I replaced the upper control arm on my 1989 Accord, the ball joint was
> shot. I also put in new bushings. The control arm and bushings were
> after market (Moog). I re-assembled the control arm as per the shop
> manual. Now I have a noise (sort of like a cracking) when the
> suspension is flexed up and down on the side that was replaced. It
> seems to be coming from the bushings. Has anybody experienced this
> before ? I used chassis grease when I re-assembled the control arm.
> Any help would be appreciated.
>
Guest
Posts: n/a
Re: 1989 Accord Front Upper Control Arm
How did you install the bushings? You want to make sure that you don't
damage the flat side when installing them, or they can make noise... I
buggered up a pair recently when I got into a hurry, and they squeaked for a
little while.
"nospam" <nospam@nospam.com> wrote in message
news:410B9D88.DCFB908C@nospam.com...
> I replaced the upper control arm on my 1989 Accord, the ball joint was
> shot. I also put in new bushings. The control arm and bushings were
> after market (Moog). I re-assembled the control arm as per the shop
> manual. Now I have a noise (sort of like a cracking) when the
> suspension is flexed up and down on the side that was replaced. It
> seems to be coming from the bushings. Has anybody experienced this
> before ? I used chassis grease when I re-assembled the control arm.
> Any help would be appreciated.
>
damage the flat side when installing them, or they can make noise... I
buggered up a pair recently when I got into a hurry, and they squeaked for a
little while.
"nospam" <nospam@nospam.com> wrote in message
news:410B9D88.DCFB908C@nospam.com...
> I replaced the upper control arm on my 1989 Accord, the ball joint was
> shot. I also put in new bushings. The control arm and bushings were
> after market (Moog). I re-assembled the control arm as per the shop
> manual. Now I have a noise (sort of like a cracking) when the
> suspension is flexed up and down on the side that was replaced. It
> seems to be coming from the bushings. Has anybody experienced this
> before ? I used chassis grease when I re-assembled the control arm.
> Any help would be appreciated.
>
Thread
Thread Starter
Forum
Replies
Last Post
cardstegra
Car Parts For Sale
0
May 2, 2005 02:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
