1990 Honda Accord Cooling Fan Not Working! - Page 2 - GTcarz

Jun 15, 2006 | 12:02 AM

#16

Alan

Guest

Posts: n/a

Re: 1990 Honda Accord Cooling Fan Not Working!

N.E.Ohio Bob wrote:

> The 90 Accord has a nice bleeder valve on the thermostat housing (10mm
> deep socket?). I use a small diameter clear vinyl hose, open the valve,
> and push the hose on the valve end. With the engine running, fill the
> radiator and let the car get to operating temp. Put the other end of the
> hose in your antifreeze jug and let the system purge of ALL the air.
> You'll see the stream from the hose run without bubbles. Close the
> valve, and instal the rad cap.

And be super careful not to overtighten the screw otherwise it will
strip out and hot water will gush out on your face and neck.

Jun 15, 2006 | 07:34 AM

#17

N.E.Ohio Bob

Guest

Posts: n/a

Re: 1990 Honda Accord Cooling Fan Not Working!

Alan wrote:

>
> And be super careful not to overtighten the screw otherwise it will
> strip out and hot water will gush out on your face and neck.
>

Ouch! Always practice safe screwing. bob

Jun 15, 2006 | 07:34 AM

#18

N.E.Ohio Bob

Guest

Posts: n/a

Re: 1990 Honda Accord Cooling Fan Not Working!

Alan wrote:

>
> And be super careful not to overtighten the screw otherwise it will
> strip out and hot water will gush out on your face and neck.
>

Ouch! Always practice safe screwing. bob

Jun 15, 2006 | 07:34 AM

#19

N.E.Ohio Bob

Guest

Posts: n/a

Re: 1990 Honda Accord Cooling Fan Not Working!

Alan wrote:

>
> And be super careful not to overtighten the screw otherwise it will
> strip out and hot water will gush out on your face and neck.
>

Ouch! Always practice safe screwing. bob