1998 Honda Passport 4x4 v6
05-16-2005, 11:35 AM
#1
Guest
Posts: n/a
1998 Honda Passport 4x4 v6
I have a 1998 Honda passport that’s been overhauled etc. Everything is
back together and in time. The car is trying to start but won’t stay
running. I noticed my plugs are wet with gas. I replaced the plugs
checked all connections but same thing occurs. Any new suggestions
would help me out.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=585092
back together and in time. The car is trying to start but won’t stay
running. I noticed my plugs are wet with gas. I replaced the plugs
checked all connections but same thing occurs. Any new suggestions
would help me out.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=585092
05-21-2005, 10:13 PM
#2
Guest
Posts: n/a
Re: 1998 Honda Passport 4x4 v6
On 16 May 2005 11:35:34 -0400, laser21 <UseLinkToEmail@AutoForumz.com>
wrote:
>I have a 1998 Honda passport that’s been overhauled etc. Everything is
>back together and in time. The car is trying to start but won’t stay
>running. I noticed my plugs are wet with gas. I replaced the plugs
>checked all connections but same thing occurs. Any new suggestions
>would help me out.
is it a dual overhead cam? if so timing is very different than just
lining up the marks......
Chip
wrote:
>I have a 1998 Honda passport that’s been overhauled etc. Everything is
>back together and in time. The car is trying to start but won’t stay
>running. I noticed my plugs are wet with gas. I replaced the plugs
>checked all connections but same thing occurs. Any new suggestions
>would help me out.
is it a dual overhead cam? if so timing is very different than just
lining up the marks......
Chip
05-21-2005, 10:13 PM
#3
Guest
Posts: n/a
Re: 1998 Honda Passport 4x4 v6
On 16 May 2005 11:35:34 -0400, laser21 <UseLinkToEmail@AutoForumz.com>
wrote:
>I have a 1998 Honda passport that’s been overhauled etc. Everything is
>back together and in time. The car is trying to start but won’t stay
>running. I noticed my plugs are wet with gas. I replaced the plugs
>checked all connections but same thing occurs. Any new suggestions
>would help me out.
is it a dual overhead cam? if so timing is very different than just
lining up the marks......
Chip
wrote:
>I have a 1998 Honda passport that’s been overhauled etc. Everything is
>back together and in time. The car is trying to start but won’t stay
>running. I noticed my plugs are wet with gas. I replaced the plugs
>checked all connections but same thing occurs. Any new suggestions
>would help me out.
is it a dual overhead cam? if so timing is very different than just
lining up the marks......
Chip
05-23-2005, 12:35 PM
#4
Guest
Posts: n/a
Re: Re: 1998 Honda Passport 4x4 v6
"hs4797" wrote:
> On 16 May 2005 11:35:34 -0400, laser21
> <UseLinkToEmail@AutoForumz.com>
> wrote:
>
> >I have a 1998 Honda passport that’s been overhauled etc.
> Everything is
> >back together and in time. The car is trying to start but
> won’t stay
> >running. I noticed my plugs are wet with gas. I replaced the
> plugs
> >checked all connections but same thing occurs. Any new
> suggestions
> >would help me out.
> is it a dual overhead cam? if so timing is very different than
> just
> lining up the marks......
> Chip
Yes it has dual overhead cams.... What else needs to be lined up
besides all the marks on the timing belt? The heads where never
rebuilt so no time issues there beside making sure they lined with the
marks on the heads/valve cover. I’m a little lost if there’s something
else that needs to be done.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=590287
> On 16 May 2005 11:35:34 -0400, laser21
> <UseLinkToEmail@AutoForumz.com>
> wrote:
>
> >I have a 1998 Honda passport that’s been overhauled etc.
> Everything is
> >back together and in time. The car is trying to start but
> won’t stay
> >running. I noticed my plugs are wet with gas. I replaced the
> plugs
> >checked all connections but same thing occurs. Any new
> suggestions
> >would help me out.
> is it a dual overhead cam? if so timing is very different than
> just
> lining up the marks......
> Chip
Yes it has dual overhead cams.... What else needs to be lined up
besides all the marks on the timing belt? The heads where never
rebuilt so no time issues there beside making sure they lined with the
marks on the heads/valve cover. I’m a little lost if there’s something
else that needs to be done.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=590287
05-23-2005, 12:35 PM
#5
Guest
Posts: n/a
Re: Re: 1998 Honda Passport 4x4 v6
"hs4797" wrote:
> On 16 May 2005 11:35:34 -0400, laser21
> <UseLinkToEmail@AutoForumz.com>
> wrote:
>
> >I have a 1998 Honda passport that’s been overhauled etc.
> Everything is
> >back together and in time. The car is trying to start but
> won’t stay
> >running. I noticed my plugs are wet with gas. I replaced the
> plugs
> >checked all connections but same thing occurs. Any new
> suggestions
> >would help me out.
> is it a dual overhead cam? if so timing is very different than
> just
> lining up the marks......
> Chip
Yes it has dual overhead cams.... What else needs to be lined up
besides all the marks on the timing belt? The heads where never
rebuilt so no time issues there beside making sure they lined with the
marks on the heads/valve cover. I’m a little lost if there’s something
else that needs to be done.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=590287
> On 16 May 2005 11:35:34 -0400, laser21
> <UseLinkToEmail@AutoForumz.com>
> wrote:
>
> >I have a 1998 Honda passport that’s been overhauled etc.
> Everything is
> >back together and in time. The car is trying to start but
> won’t stay
> >running. I noticed my plugs are wet with gas. I replaced the
> plugs
> >checked all connections but same thing occurs. Any new
> suggestions
> >would help me out.
> is it a dual overhead cam? if so timing is very different than
> just
> lining up the marks......
> Chip
Yes it has dual overhead cams.... What else needs to be lined up
besides all the marks on the timing belt? The heads where never
rebuilt so no time issues there beside making sure they lined with the
marks on the heads/valve cover. I’m a little lost if there’s something
else that needs to be done.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-1998...ict120416.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=590287
05-26-2005, 07:35 PM
#6
Guest
Posts: n/a
Re: 1998 Honda Passport 4x4 v6
laser21 wrote:
> "hs4797" wrote:
> > On 16 May 2005 11:35:34 -0400, laser21
> > <UseLinkToEmail@AutoForumz.com>
> > wrote:
> >
> > >I have a 1998 Honda passport that’s been overhauled etc.
> > Everything is
> > >back together and in time. The car is trying to start but
> > won’t stay
> > >running. I noticed my plugs are wet with gas. I replaced the
> > plugs
> > >checked all connections but same thing occurs. Any new
> > suggestions
> > >would help me out.
> > is it a dual overhead cam? if so timing is very different than
> > just
> > lining up the marks......
> > Chip
>
> Yes it has dual overhead cams.... What else needs to be lined up
> besides all the marks on the timing belt? The heads where never
> rebuilt so no time issues there beside making sure they lined with the
> marks on the heads/valve cover. I’m a little lost if there’s something
> else that needs to be done.
>
When you put the timing belt on, the cam on the passenger's side should
be rotated clockwise until it springs to the timing mark on the valve
cover, but the cam on the driver's side needs to spring in place 90 deg.
counter clockwise from the mark on the valve cover. Now hold that cam on
the mark (90 deg. clockwise)and put the belt on aligning all three
marks. It should run like new.
Hope this helps.
Dan
> "hs4797" wrote:
> > On 16 May 2005 11:35:34 -0400, laser21
> > <UseLinkToEmail@AutoForumz.com>
> > wrote:
> >
> > >I have a 1998 Honda passport that’s been overhauled etc.
> > Everything is
> > >back together and in time. The car is trying to start but
> > won’t stay
> > >running. I noticed my plugs are wet with gas. I replaced the
> > plugs
> > >checked all connections but same thing occurs. Any new
> > suggestions
> > >would help me out.
> > is it a dual overhead cam? if so timing is very different than
> > just
> > lining up the marks......
> > Chip
>
> Yes it has dual overhead cams.... What else needs to be lined up
> besides all the marks on the timing belt? The heads where never
> rebuilt so no time issues there beside making sure they lined with the
> marks on the heads/valve cover. I’m a little lost if there’s something
> else that needs to be done.
>
When you put the timing belt on, the cam on the passenger's side should
be rotated clockwise until it springs to the timing mark on the valve
cover, but the cam on the driver's side needs to spring in place 90 deg.
counter clockwise from the mark on the valve cover. Now hold that cam on
the mark (90 deg. clockwise)and put the belt on aligning all three
marks. It should run like new.
Hope this helps.
Dan
05-26-2005, 07:35 PM
#7
Guest
Posts: n/a
Re: 1998 Honda Passport 4x4 v6
laser21 wrote:
> "hs4797" wrote:
> > On 16 May 2005 11:35:34 -0400, laser21
> > <UseLinkToEmail@AutoForumz.com>
> > wrote:
> >
> > >I have a 1998 Honda passport that’s been overhauled etc.
> > Everything is
> > >back together and in time. The car is trying to start but
> > won’t stay
> > >running. I noticed my plugs are wet with gas. I replaced the
> > plugs
> > >checked all connections but same thing occurs. Any new
> > suggestions
> > >would help me out.
> > is it a dual overhead cam? if so timing is very different than
> > just
> > lining up the marks......
> > Chip
>
> Yes it has dual overhead cams.... What else needs to be lined up
> besides all the marks on the timing belt? The heads where never
> rebuilt so no time issues there beside making sure they lined with the
> marks on the heads/valve cover. I’m a little lost if there’s something
> else that needs to be done.
>
When you put the timing belt on, the cam on the passenger's side should
be rotated clockwise until it springs to the timing mark on the valve
cover, but the cam on the driver's side needs to spring in place 90 deg.
counter clockwise from the mark on the valve cover. Now hold that cam on
the mark (90 deg. clockwise)and put the belt on aligning all three
marks. It should run like new.
Hope this helps.
Dan
> "hs4797" wrote:
> > On 16 May 2005 11:35:34 -0400, laser21
> > <UseLinkToEmail@AutoForumz.com>
> > wrote:
> >
> > >I have a 1998 Honda passport that’s been overhauled etc.
> > Everything is
> > >back together and in time. The car is trying to start but
> > won’t stay
> > >running. I noticed my plugs are wet with gas. I replaced the
> > plugs
> > >checked all connections but same thing occurs. Any new
> > suggestions
> > >would help me out.
> > is it a dual overhead cam? if so timing is very different than
> > just
> > lining up the marks......
> > Chip
>
> Yes it has dual overhead cams.... What else needs to be lined up
> besides all the marks on the timing belt? The heads where never
> rebuilt so no time issues there beside making sure they lined with the
> marks on the heads/valve cover. I’m a little lost if there’s something
> else that needs to be done.
>
When you put the timing belt on, the cam on the passenger's side should
be rotated clockwise until it springs to the timing mark on the valve
cover, but the cam on the driver's side needs to spring in place 90 deg.
counter clockwise from the mark on the valve cover. Now hold that cam on
the mark (90 deg. clockwise)and put the belt on aligning all three
marks. It should run like new.
Hope this helps.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Car freak
Other Honda Models
0
08-23-2007 03:20 AM
Walter
Honda Mailing List
0
09-30-2003 08:04 PM
‘5ÛHH575-UAZWKVVP-7H2H48V3
Honda Mailing List
2
09-07-2003 10:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
