'91 Accord Igniter Differences
Guest
Posts: n/a
'91 Accord Igniter Differences
I am replacing the component (igniter) show in the link
http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
here was kind enough to send me the unit seen on the right in the photo.
The unit in the left is all green, has an ID number of E12-303, and another
ID number below which reads 4518. The new piece, from a '91 Accord reads
E12-302 and 3918, and is partly black. Safe to try the replacement? I have
already attached the new component to a silver colored backing (which I need
to better align).
- Phil
http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
here was kind enough to send me the unit seen on the right in the photo.
The unit in the left is all green, has an ID number of E12-303, and another
ID number below which reads 4518. The new piece, from a '91 Accord reads
E12-302 and 3918, and is partly black. Safe to try the replacement? I have
already attached the new component to a silver colored backing (which I need
to better align).
- Phil
Guest
Posts: n/a
Re: '91 Accord Igniter Differences
There were two ignitors that I sent to you. One of them is from my '92,
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
Guest
Posts: n/a
Re: '91 Accord Igniter Differences
There were two ignitors that I sent to you. One of them is from my '92,
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
Guest
Posts: n/a
Re: '91 Accord Igniter Differences
There were two ignitors that I sent to you. One of them is from my '92,
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
Guest
Posts: n/a
Re: '91 Accord Igniter Differences
There were two ignitors that I sent to you. One of them is from my '92,
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
and won't work. The other is from my son's '91, and is a good one. I
hope you try the good one first. I wasn't able to tell them apart when I
found them in my tool box. Both are original equipment Honda parts, not
aftermarket ones. bob
Phil wrote:
>
> I am replacing the component (igniter) show in the link
> http://www.mentz50th.com/igniter.jpg, in a '91 Accord distributor. A poster
> here was kind enough to send me the unit seen on the right in the photo.
> The unit in the left is all green, has an ID number of E12-303, and another
> ID number below which reads 4518. The new piece, from a '91 Accord reads
> E12-302 and 3918, and is partly black. Safe to try the replacement? I have
> already attached the new component to a silver colored backing (which I need
> to better align).
>
> - Phil
Thread
Thread Starter
Forum
Replies
Last Post
bowden152002
Honda Accord
1
Jan 21, 2008 07:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
