Mark

One of the keys for our 2004 Accord has broken. The plastic casing for the
security 'FOB' part of the key has broken and the key is nearly coming out.
Anyone know if it is possible to get new plastic casing? It seems the
electronics and key could be placed in a new casing cheaper than replacing
the entire thing. Is this possible?

Thanks!

Mark

Mark

No response in several weeks so I assume I must have either done the
unthinkable and become the 1st person to ever break a key or have received a
defective key from the factory. (I'm thinking the latter since the other
key is showing no signs for breaking even though I use it about 1/2 the
time.)

I'm going to put a new battery in the broken key and then use gorilla glue
to fix it - permanently! When the battery goes I'll either find a key at
the junk-yard to use the case from, pay the dealer price for a new key, or
trade the car on a new one!

Mark



"Mark" <mwl@nospam.com> wrote in message
news:uSAFk.295$kn5.183@newsfe12.iad...
> One of the keys for our 2004 Accord has broken. The plastic casing for the
> security 'FOB' part of the key has broken and the key is nearly coming
> out. Anyone know if it is possible to get new plastic casing? It seems
> the electronics and key could be placed in a new casing cheaper than
> replacing the entire thing. Is this possible?
>
> Thanks!
>
> Mark

Al

Mark wrote:
> No response in several weeks so I assume I must have either done the
> unthinkable and become the 1st person to ever break a key or have
> received a defective key from the factory. (I'm thinking the latter
> since the other key is showing no signs for breaking even though I use
> it about 1/2 the time.)
>
> I'm going to put a new battery in the broken key and then use gorilla
> glue to fix it - permanently! When the battery goes I'll either find a
> key at the junk-yard to use the case from, pay the dealer price for a
> new key, or trade the car on a new one!
>
> Mark
>
>
>
> "Mark" <mwl@nospam.com> wrote in message
> news:uSAFk.295$kn5.183@newsfe12.iad...
>> One of the keys for our 2004 Accord has broken. The plastic casing for
>> the security 'FOB' part of the key has broken and the key is nearly
>> coming out. Anyone know if it is possible to get new plastic casing?
>> It seems the electronics and key could be placed in a new casing
>> cheaper than replacing the entire thing. Is this possible?
>>
>> Thanks!
>>
>> Mark
>

They seem to be in the range of 25 bucks brand new on ebay - no good?

I got one last year for a non-Honda and had no issues.

Michael Pardee

Check out http://www.remotesandkeys.com/ - when the eyelet broke on my
Toyota key I ordered a rubber cover ($8 plus $4 S/H) and it was a good
solution.

Mike
"Mark" <mwl@nospam.com> wrote in message
news:lBONk.19296$UD6.11613@newsfe07.iad...
> No response in several weeks so I assume I must have either done the
> unthinkable and become the 1st person to ever break a key or have received
> a defective key from the factory. (I'm thinking the latter since the
> other key is showing no signs for breaking even though I use it about 1/2
> the time.)
>
> I'm going to put a new battery in the broken key and then use gorilla glue
> to fix it - permanently! When the battery goes I'll either find a key at
> the junk-yard to use the case from, pay the dealer price for a new key, or
> trade the car on a new one!
>
> Mark
>
>
>
> "Mark" <mwl@nospam.com> wrote in message
> news:uSAFk.295$kn5.183@newsfe12.iad...
>> One of the keys for our 2004 Accord has broken. The plastic casing for
>> the security 'FOB' part of the key has broken and the key is nearly
>> coming out. Anyone know if it is possible to get new plastic casing? It
>> seems the electronics and key could be placed in a new casing cheaper
>> than replacing the entire thing. Is this possible?
>>
>> Thanks!
>>
>> Mark
>
>

James Sweet

>>
>> I'm going to put a new battery in the broken key and then use gorilla glue
>> to fix it - permanently! When the battery goes I'll either find a key at
>> the junk-yard to use the case from, pay the dealer price for a new key, or
>> trade the car on a new one!
>>
>> Mark
>>

Unfortunately, this sort of thing (and most things these days really)
are considered non-serviceable assemblies and parts are not available
individually. Gorilla glue is not the best choice for this, it tends to
foam and expand significantly as it cures. A better bet would be epoxy,
you can get it specifically designed to bond to plastics, I think the
stuff I have is called Plastic Weld. It bonds very well to most plastics
and is sturdy enough that I've used it to mold replacements for missing
sections of parts. Cyanoacrylate (superglue, crazy glue, etc) will
usually work too, but it tends to get all over everything and the vapors
turn finger oils into whitish deposits. Glued very carefully, you should
be able to crack it back open later to change the battery.

Michael Pardee

"James Sweet" <jamessweet1@trashmail.net> wrote in message
news:gfcqa3$ap1$1@news.albasani.net...
>
>>>
>>> I'm going to put a new battery in the broken key and then use gorilla
>>> glue to fix it - permanently! When the battery goes I'll either find a
>>> key at the junk-yard to use the case from, pay the dealer price for a
>>> new key, or trade the car on a new one!
>>>
>>> Mark
>>>
>
> Unfortunately, this sort of thing (and most things these days really) are
> considered non-serviceable assemblies and parts are not available
> individually. Gorilla glue is not the best choice for this, it tends to
> foam and expand significantly as it cures. A better bet would be epoxy,
> you can get it specifically designed to bond to plastics, I think the
> stuff I have is called Plastic Weld. It bonds very well to most plastics
> and is sturdy enough that I've used it to mold replacements for missing
> sections of parts. Cyanoacrylate (superglue, crazy glue, etc) will usually
> work too, but it tends to get all over everything and the vapors turn
> finger oils into whitish deposits. Glued very carefully, you should be
> able to crack it back open later to change the battery.
>

Although KeysandRemotes.com has the replacement case for $14, if this is the
right style
http://www.remotesandkeys.com/Search...s.asp?Cat=3034

Mark

Yup - that be the one. I've used the good ol' hot-glue on it for now, so
once the battery starts to die I'll probably order one and see if I can get
it cut at the locksmith.

Thanks!

"Michael Pardee" <null@null.org> wrote in message
news:ndSdnfF34bgDgofUnZ2dnUVZ_sjinZ2d@sedona.net.. .
>
> "James Sweet" <jamessweet1@trashmail.net> wrote in message
> news:gfcqa3$ap1$1@news.albasani.net...
>>
>>>>
>>>> I'm going to put a new battery in the broken key and then use gorilla
>>>> glue to fix it - permanently! When the battery goes I'll either find a
>>>> key at the junk-yard to use the case from, pay the dealer price for a
>>>> new key, or trade the car on a new one!
>>>>
>>>> Mark
>>>>
>>
>> Unfortunately, this sort of thing (and most things these days really) are
>> considered non-serviceable assemblies and parts are not available
>> individually. Gorilla glue is not the best choice for this, it tends to
>> foam and expand significantly as it cures. A better bet would be epoxy,
>> you can get it specifically designed to bond to plastics, I think the
>> stuff I have is called Plastic Weld. It bonds very well to most plastics
>> and is sturdy enough that I've used it to mold replacements for missing
>> sections of parts. Cyanoacrylate (superglue, crazy glue, etc) will
>> usually work too, but it tends to get all over everything and the vapors
>> turn finger oils into whitish deposits. Glued very carefully, you should
>> be able to crack it back open later to change the battery.
>>
>
> Although KeysandRemotes.com has the replacement case for $14, if this is
> the right style
> http://www.remotesandkeys.com/Search...s.asp?Cat=3034
>

Tony Hwang

Mark wrote:
> One of the keys for our 2004 Accord has broken. The plastic casing for
> the security 'FOB' part of the key has broken and the key is nearly
> coming out. Anyone know if it is possible to get new plastic casing? It
> seems the electronics and key could be placed in a new casing cheaper
> than replacing the entire thing. Is this possible?
>
> Thanks!
>
> Mark
Hi,
If it still works, you can use epoxy to hold them together.
May not be pretty but the epoxy will do the job.

Michael Pardee

A two-stage approach - I like it!

Mike

"Mark" <mwl@nospam.com> wrote in message
news:8u4Tk.112$us4.91@newsfe14.iad...
> Yup - that be the one. I've used the good ol' hot-glue on it for now, so
> once the battery starts to die I'll probably order one and see if I can
> get it cut at the locksmith.
>
> Thanks!
>
> "Michael Pardee" <null@null.org> wrote in message
> news:ndSdnfF34bgDgofUnZ2dnUVZ_sjinZ2d@sedona.net.. .
>>
>> "James Sweet" <jamessweet1@trashmail.net> wrote in message
>> news:gfcqa3$ap1$1@news.albasani.net...
>>>
>>>>>
>>>>> I'm going to put a new battery in the broken key and then use gorilla
>>>>> glue to fix it - permanently! When the battery goes I'll either find
>>>>> a key at the junk-yard to use the case from, pay the dealer price for
>>>>> a new key, or trade the car on a new one!
>>>>>
>>>>> Mark
>>>>>
>>>
>>> Unfortunately, this sort of thing (and most things these days really)
>>> are considered non-serviceable assemblies and parts are not available
>>> individually. Gorilla glue is not the best choice for this, it tends to
>>> foam and expand significantly as it cures. A better bet would be epoxy,
>>> you can get it specifically designed to bond to plastics, I think the
>>> stuff I have is called Plastic Weld. It bonds very well to most plastics
>>> and is sturdy enough that I've used it to mold replacements for missing
>>> sections of parts. Cyanoacrylate (superglue, crazy glue, etc) will
>>> usually work too, but it tends to get all over everything and the vapors
>>> turn finger oils into whitish deposits. Glued very carefully, you should
>>> be able to crack it back open later to change the battery.
>>>
>>
>> Although KeysandRemotes.com has the replacement case for $14, if this is
>> the right style
>> http://www.remotesandkeys.com/Search...s.asp?Cat=3034
>>
>
>

Evan Platt

On Fri, 3 Oct 2008 22:51:04 -0400, "Mark" <mwl@nospam.com> wrote:

>One of the keys for our 2004 Accord has broken. The plastic casing for the
>security 'FOB' part of the key has broken and the key is nearly coming out.
>Anyone know if it is possible to get new plastic casing? It seems the
>electronics and key could be placed in a new casing cheaper than replacing
>the entire thing. Is this possible?

Mark:

Not sure if you got this resolved yet...

Check out
http://www.dealextreme.com/products....h.key%20casing

and see if they have what you need.

Evan
--
To reply via e-mail, remove The Obvious from my e-mail address.