Clicking on right hand turns
10-12-2003, 09:35 PM
#2
Guest
Posts: n/a
Re: Clicking on right hand turns
Ok... Here it goes...
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
10-12-2003, 09:35 PM
#3
Guest
Posts: n/a
Re: Clicking on right hand turns
Ok... Here it goes...
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
10-12-2003, 09:35 PM
#4
Guest
Posts: n/a
Re: Clicking on right hand turns
Ok... Here it goes...
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
Reading thru NG I found that this is left (driver side) CV since it
clcikcing on right turns.
Got new CV halfshaft and replaced today. It was a long story:
When taking wheel off I broke one of those bolts and had to take all bearing
assembly out. I had to do some banging to get it out of rust...
Now I don't have any clicking and it drives smooth.
However, on a tight turns under power I hear scratching noise from my left
wheel.
What that could be???
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> Hi!
>
> I know this is axle, but which one is that if I hear it on righ turns?
>
>
>
10-13-2003, 04:29 AM
#5
Guest
Posts: n/a
Re: Clicking on right hand turns
A very common noise maker, after repairs such as you did, is a bent dust
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
10-13-2003, 04:29 AM
#6
Guest
Posts: n/a
Re: Clicking on right hand turns
A very common noise maker, after repairs such as you did, is a bent dust
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
10-13-2003, 04:29 AM
#7
Guest
Posts: n/a
Re: Clicking on right hand turns
A very common noise maker, after repairs such as you did, is a bent dust
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
shield on the brakes. It is very thin metal and bends quite easily. Check
and see if it is rubbing on the tire, axle, or some moving part with the
wheel hard over. Fix - usually can be bent out of the way by hand.
Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
"Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
news:gjnib.662$Yl3.124@newssvr23.news.prodigy.com. ..
>
> Now I don't have any clicking and it drives smooth.
>
> However, on a tight turns under power I hear scratching noise from my left
> wheel.
>
> What that could be???
>
>
>
> "Ivan Demkovitch" <idemkovitch@nospam.hotmail.com> wrote in message
> news:fY2ib.1239$Y12.942@newssvr24.news.prodigy.com ...
> > Hi!
> >
> > I know this is axle, but which one is that if I hear it on righ turns?
> >
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
ADRIAN K
honda / acura
1
12-18-2007 01:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
