Crankshaft bolt, right or left thread?
#1
Guest
Posts: n/a
Crankshaft bolt, right or left thread?
1997 DOHC 2.2l in a prelude. I can't get the bolt loose and I don't
want to break anything. I have the hex socket pulley holder and a long
breaker bar and a pipe but no joy with I think is plenty of force.
Is this possibly left hand thread?
want to break anything. I have the hex socket pulley holder and a long
breaker bar and a pipe but no joy with I think is plenty of force.
Is this possibly left hand thread?
#2
Guest
Posts: n/a
Re: Crankshaft bolt, right or left thread?
It's right hand.
It's hard to break loose most likely because of the finer
than usual thread used on this bolt.
May need an extension on the pipe. You should only be using
1/2-inch drives or higher. Anything less than this, and
things get unsafe. One guy here argues for 3/4-inch drives,
and he has a point.
An impact wrench, rented if necessary, is something to
consider for this job. Or take it to your local mechanic,
throw on the rack, have him loosen, then re-snug for the
trip home, but not too tight.
Plenty of folks here have wondered if it's left hand. I am a
long time poster here and have had my own 91 Civic's crank
pulley bolt off many a time. After several years, it's
usually darn tight. But I manage with a 1/2-inch drive set
and about a five-foot pipe extension on the end of an
18-inch breaker bar. Pillow beneath in case I slip. About 90
degrees of windup may be required. This is not for the feint
of heart or those not safety-minded.
<gfretwell@aol.com> wrote
> 1997 DOHC 2.2l in a prelude. I can't get the bolt loose
> and I don't
> want to break anything. I have the hex socket pulley
> holder and a long
> breaker bar and a pipe but no joy with I think is plenty
> of force.
> Is this possibly left hand thread?
It's hard to break loose most likely because of the finer
than usual thread used on this bolt.
May need an extension on the pipe. You should only be using
1/2-inch drives or higher. Anything less than this, and
things get unsafe. One guy here argues for 3/4-inch drives,
and he has a point.
An impact wrench, rented if necessary, is something to
consider for this job. Or take it to your local mechanic,
throw on the rack, have him loosen, then re-snug for the
trip home, but not too tight.
Plenty of folks here have wondered if it's left hand. I am a
long time poster here and have had my own 91 Civic's crank
pulley bolt off many a time. After several years, it's
usually darn tight. But I manage with a 1/2-inch drive set
and about a five-foot pipe extension on the end of an
18-inch breaker bar. Pillow beneath in case I slip. About 90
degrees of windup may be required. This is not for the feint
of heart or those not safety-minded.
<gfretwell@aol.com> wrote
> 1997 DOHC 2.2l in a prelude. I can't get the bolt loose
> and I don't
> want to break anything. I have the hex socket pulley
> holder and a long
> breaker bar and a pipe but no joy with I think is plenty
> of force.
> Is this possibly left hand thread?
#3
Guest
Posts: n/a
Re: Crankshaft bolt, right or left thread?
gfretwell@aol.com wrote in news:nk4kq3l8bk0lqd7764s896fco4udrd3vk6@4ax.com:
> 1997 DOHC 2.2l in a prelude. I can't get the bolt loose and I don't
> want to break anything. I have the hex socket pulley holder and a long
> breaker bar and a pipe but no joy with I think is plenty of force.
> Is this possibly left hand thread?
Glad you asked that. This is one of the very oldest of the FAQ entires.
http://www.tegger.com/hondafaq/cranktool/index.html
Basically what Elle said, plus more.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
> 1997 DOHC 2.2l in a prelude. I can't get the bolt loose and I don't
> want to break anything. I have the hex socket pulley holder and a long
> breaker bar and a pipe but no joy with I think is plenty of force.
> Is this possibly left hand thread?
Glad you asked that. This is one of the very oldest of the FAQ entires.
http://www.tegger.com/hondafaq/cranktool/index.html
Basically what Elle said, plus more.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
steve
Honda Mailing List
12
01-16-2004 04:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)