89 accord crankshaft bolt Left or right hand thread.
#1
Guest
Posts: n/a
89 accord crankshaft bolt Left or right hand thread.
I'm trying to replace the timing belt in my old 89 accord lxi and the crank
bolt wont budge. I tried the impact wrench as well as using the starter to
turn it over.
before grabbing my biggest breaker bar and turning the bolt weather it wants
to move or not I figured I better ask one stupid question first.
Is the bolt a normal right hand thread or is it a left hand/reverse thread?
It has been 10 years since I had it off and knowing me I probably put
locktite on it but before I get rough with it I figured I would check with
the experts?
Any informat is greatly appreciated.
Thanks in advance.
Steve
bolt wont budge. I tried the impact wrench as well as using the starter to
turn it over.
before grabbing my biggest breaker bar and turning the bolt weather it wants
to move or not I figured I better ask one stupid question first.
Is the bolt a normal right hand thread or is it a left hand/reverse thread?
It has been 10 years since I had it off and knowing me I probably put
locktite on it but before I get rough with it I figured I would check with
the experts?
Any informat is greatly appreciated.
Thanks in advance.
Steve
#2
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
On my 91 Civic, it's Lefty Lousy. I was able to loosen the bolt with an
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#3
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
On my 91 Civic, it's Lefty Lousy. I was able to loosen the bolt with an
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#4
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
On my 91 Civic, it's Lefty Lousy. I was able to loosen the bolt with an
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#5
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
On my 91 Civic, it's Lefty Lousy. I was able to loosen the bolt with an
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
impact gun.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#6
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
steve wrote:
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
#7
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
steve wrote:
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
#8
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
steve wrote:
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
#9
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
steve wrote:
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
>
> I'm trying to replace the timing belt in my old 89 accord lxi and the crank
> bolt wont budge. I tried the impact wrench as well as using the starter to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
==========================
It's a standard thread, but you were supposed to douse it with motor oil
last time you had it apart, not LockTite. Try not the separate your
shoulder removing the sucker.....Or you won't be dancing on New Year's
eve. :-(
'Curly'
======================
#10
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
You probably figured out already that you in fact put lock-tite on it last
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#11
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
You probably figured out already that you in fact put lock-tite on it last
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#12
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
You probably figured out already that you in fact put lock-tite on it last
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
#13
Guest
Posts: n/a
Re: 89 accord crankshaft bolt Left or right hand thread.
You probably figured out already that you in fact put lock-tite on it last
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
time, but for anyone else that's interested it has a regular right hand
thread. The special washers are key. An impact wrench should spin it off
easily. It only goes on with 83 ft-lbs, about the same as steel rim.
"steve" <Ludicrousspeed@nc.rr.com> wrote in message
news:lZoIb.194697$dl.8917003@twister.southeast.rr. com...
> I'm trying to replace the timing belt in my old 89 accord lxi and the
crank
> bolt wont budge. I tried the impact wrench as well as using the starter
to
> turn it over.
> before grabbing my biggest breaker bar and turning the bolt weather it
wants
> to move or not I figured I better ask one stupid question first.
> Is the bolt a normal right hand thread or is it a left hand/reverse
thread?
> It has been 10 years since I had it off and knowing me I probably put
> locktite on it but before I get rough with it I figured I would check with
> the experts?
>
> Any informat is greatly appreciated.
>
> Thanks in advance.
> Steve
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)