Al Smith

My three cents is, it depends on the car.

I have enough confidence in my Honda Civic that I wouldn't
worry about it. I think that the quality of the studs and nuts
are high enough that there would be no problem from rust.
Grit from the road would be a different consideration.

I have a trash Dodge Omni I drive in the winter. I always
greased the lug nuts each fall because there is no way that the
lug nuts would come off otherwise.

"endo" <derbender@att.net> wrote in message
news:xgtXb.19235$hR.554066@bgtnsc05-news.ops.worldnet.att.net...
> I have to say "it depends"...If you live where there is lots of salt

> on the streets in the winter, you'll eventually be sorry you did not have
> the hubcaps on when trying to change a flat tire on the side of the road
> yourself with just a regular lug wrench. I believe that in some cases,
> there would be more corrosion between the lugs and the wheel studs, making
> the lug nearly impossible to remove with a regular tool. This assumes you
> have "open" wheel studs, that expose the end of the stud to the air.
>
> If the wheel lugs totally enclose the end of the stud, that's better, but
I
> still think that corrosion could cause the lug nut to stick to the wheel.
>
> my $.02, and personal experience with running cars without hubcaps.
>
>
> "Im anonymous" <acctforjunk@yahoo.com> wrote in message
> news:bffabe31.0402121235.1a5159a2@posting.google.c om...
> > "Bill" <bill@remove.nospam.com> wrote in message
> news:<WSMWb.14522$_44.18392@attbi_s52>...
> > > One of the wheel hubcaps (plastic) on my 93 accord came off. Is it
> dangerous
> > > to drive on highway?
> > >
> > > That makes me wonder what the purpose of hubcaps are. Thanks.
> > They're just for looks. That's all.
>
>

Al Smith

My three cents is, it depends on the car.

I have enough confidence in my Honda Civic that I wouldn't
worry about it. I think that the quality of the studs and nuts
are high enough that there would be no problem from rust.
Grit from the road would be a different consideration.

I have a trash Dodge Omni I drive in the winter. I always
greased the lug nuts each fall because there is no way that the
lug nuts would come off otherwise.

"endo" <derbender@att.net> wrote in message
news:xgtXb.19235$hR.554066@bgtnsc05-news.ops.worldnet.att.net...
> I have to say "it depends"...If you live where there is lots of salt

> on the streets in the winter, you'll eventually be sorry you did not have
> the hubcaps on when trying to change a flat tire on the side of the road
> yourself with just a regular lug wrench. I believe that in some cases,
> there would be more corrosion between the lugs and the wheel studs, making
> the lug nearly impossible to remove with a regular tool. This assumes you
> have "open" wheel studs, that expose the end of the stud to the air.
>
> If the wheel lugs totally enclose the end of the stud, that's better, but
I
> still think that corrosion could cause the lug nut to stick to the wheel.
>
> my $.02, and personal experience with running cars without hubcaps.
>
>
> "Im anonymous" <acctforjunk@yahoo.com> wrote in message
> news:bffabe31.0402121235.1a5159a2@posting.google.c om...
> > "Bill" <bill@remove.nospam.com> wrote in message
> news:<WSMWb.14522$_44.18392@attbi_s52>...
> > > One of the wheel hubcaps (plastic) on my 93 accord came off. Is it
> dangerous
> > > to drive on highway?
> > >
> > > That makes me wonder what the purpose of hubcaps are. Thanks.
> > They're just for looks. That's all.
>
>

Jon

Uncle Mike wrote:
> In article <%dWWb.1056$Ks6.12282@nnrp1.uunet.ca>, "Brian Smith" <Halifax@NovaScotia.Canada> wrote:
>
>>"tflfb" <fuksatw@qwest.net> wrote in message
>>news:IcWWb.315$ao3.70870@news.uswest.net...
>>
>>>Your nuts will be showing
>>
>>LOL! That's a fact!
>
>
> Your nuts will get dirty too.
>
>
> "alot is not a word"
> Uncle Mike
Thank the lord your nuts will be attached to a stud, but also , all nuts
should have anti seize grease added to the threads as well, other wise
the nuts will be hard to separate from the stud....Something like
graphite grease would be OK. No hub caps? Id rather be seen driving
naked. But then again I'm from Australia where it gets pretty hot..

Jon

Uncle Mike wrote:
> In article <%dWWb.1056$Ks6.12282@nnrp1.uunet.ca>, "Brian Smith" <Halifax@NovaScotia.Canada> wrote:
>
>>"tflfb" <fuksatw@qwest.net> wrote in message
>>news:IcWWb.315$ao3.70870@news.uswest.net...
>>
>>>Your nuts will be showing
>>
>>LOL! That's a fact!
>
>
> Your nuts will get dirty too.
>
>
> "alot is not a word"
> Uncle Mike
Thank the lord your nuts will be attached to a stud, but also , all nuts
should have anti seize grease added to the threads as well, other wise
the nuts will be hard to separate from the stud....Something like
graphite grease would be OK. No hub caps? Id rather be seen driving
naked. But then again I'm from Australia where it gets pretty hot..

Jon

Uncle Mike wrote:
> In article <%dWWb.1056$Ks6.12282@nnrp1.uunet.ca>, "Brian Smith" <Halifax@NovaScotia.Canada> wrote:
>
>>"tflfb" <fuksatw@qwest.net> wrote in message
>>news:IcWWb.315$ao3.70870@news.uswest.net...
>>
>>>Your nuts will be showing
>>
>>LOL! That's a fact!
>
>
> Your nuts will get dirty too.
>
>
> "alot is not a word"
> Uncle Mike
Thank the lord your nuts will be attached to a stud, but also , all nuts
should have anti seize grease added to the threads as well, other wise
the nuts will be hard to separate from the stud....Something like
graphite grease would be OK. No hub caps? Id rather be seen driving
naked. But then again I'm from Australia where it gets pretty hot..

Jon

Uncle Mike wrote:
> In article <%dWWb.1056$Ks6.12282@nnrp1.uunet.ca>, "Brian Smith" <Halifax@NovaScotia.Canada> wrote:
>
>>"tflfb" <fuksatw@qwest.net> wrote in message
>>news:IcWWb.315$ao3.70870@news.uswest.net...
>>
>>>Your nuts will be showing
>>
>>LOL! That's a fact!
>
>
> Your nuts will get dirty too.
>
>
> "alot is not a word"
> Uncle Mike
Thank the lord your nuts will be attached to a stud, but also , all nuts
should have anti seize grease added to the threads as well, other wise
the nuts will be hard to separate from the stud....Something like
graphite grease would be OK. No hub caps? Id rather be seen driving
naked. But then again I'm from Australia where it gets pretty hot..