It's time to change my Timing Belt on a 95 honda accord v6...
It's time to change my Timing Belt on a 95 honda accord v6...I need
Holder handle 07jab -001020A , holder attachment, 50 mm 07mab -py3010a and Socket, 19mm 07jaa-001020a Can you tell me where I can find these tools otherthan at Honda? tks |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in message
news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... > It's time to change my Timing Belt on a 95 honda accord v6...I need > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a > > Can you tell me where I can find these tools otherthan at Honda? > > > > tks > > > Look over http://tegger.com/hondafaq/cranktool/index.html (and the next section about getting the belt on right!) The socket is a normal 19 mm socket, but be aware the job is much easier with an impact driver, and that requires an impact socket (black). With the holder, a long breaker bar and a lot of manly muscles the bolt can be broken loose, but your manly muscles will be sore when you finish. Mike |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in message
news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... > It's time to change my Timing Belt on a 95 honda accord v6...I need > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a > > Can you tell me where I can find these tools otherthan at Honda? > > > > tks > > > Look over http://tegger.com/hondafaq/cranktool/index.html (and the next section about getting the belt on right!) The socket is a normal 19 mm socket, but be aware the job is much easier with an impact driver, and that requires an impact socket (black). With the holder, a long breaker bar and a lot of manly muscles the bolt can be broken loose, but your manly muscles will be sore when you finish. Mike |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Michael Pardee" <michaeltnull@cybertrails.com> wrote in message
news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... > "Zeek" <cedricbmason@comcast.net> wrote in message > news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >> It's time to change my Timing Belt on a 95 honda accord v6...I need >> >> Holder handle 07jab -001020A , >> >> holder attachment, 50 mm 07mab -py3010a and >> >> Socket, 19mm 07jaa-001020a >> >> Can you tell me where I can find these tools otherthan at Honda? >> >> >> >> tks >> >> >> > Look over http://tegger.com/hondafaq/cranktool/index.html (and the next > section about getting the belt on right!) > > The socket is a normal 19 mm socket, but be aware the job is much easier > with an impact driver, and that requires an impact socket (black). With > the holder, a long breaker bar and a lot of manly muscles the bolt can be > broken loose, but your manly muscles will be sore when you finish. > > Mike > > > I should mention - if you can get ahold of an impact driver and socket (like by renting them) you won't need the holder. This is a case of "bigger is better" on the driver, though; 400 ft-lbs is about the minimum. I used a 500 ft-lb pneumatic driver with the regulator right at the tool when we did my son's Acura, and it struggled a bit. Don't listen to anybody who tries to tell you the bolt can be loosened by putting the handle of a socket wrench on a jackstand and hitting the starter. The engine turns the wrong way 8^O Mike again |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Michael Pardee" <michaeltnull@cybertrails.com> wrote in message
news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... > "Zeek" <cedricbmason@comcast.net> wrote in message > news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >> It's time to change my Timing Belt on a 95 honda accord v6...I need >> >> Holder handle 07jab -001020A , >> >> holder attachment, 50 mm 07mab -py3010a and >> >> Socket, 19mm 07jaa-001020a >> >> Can you tell me where I can find these tools otherthan at Honda? >> >> >> >> tks >> >> >> > Look over http://tegger.com/hondafaq/cranktool/index.html (and the next > section about getting the belt on right!) > > The socket is a normal 19 mm socket, but be aware the job is much easier > with an impact driver, and that requires an impact socket (black). With > the holder, a long breaker bar and a lot of manly muscles the bolt can be > broken loose, but your manly muscles will be sore when you finish. > > Mike > > > I should mention - if you can get ahold of an impact driver and socket (like by renting them) you won't need the holder. This is a case of "bigger is better" on the driver, though; 400 ft-lbs is about the minimum. I used a 500 ft-lb pneumatic driver with the regulator right at the tool when we did my son's Acura, and it struggled a bit. Don't listen to anybody who tries to tell you the bolt can be loosened by putting the handle of a socket wrench on a jackstand and hitting the starter. The engine turns the wrong way 8^O Mike again |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
thank you. My problem is finding the tools i listed. Can anyone tell me
where i can find the TOOLS; other than at Honda? Holder handle 07jab -001020A , holder attachment, 50 mm 07mab -py3010a and Socket, 19mm 07jaa-001020a "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:lZCdneQm7O7nqbHbnZ2dnUVZ_t2tnZ2d@sedona.net.. . > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... >> "Zeek" <cedricbmason@comcast.net> wrote in message >> news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >>> It's time to change my Timing Belt on a 95 honda accord v6...I need >>> >>> Holder handle 07jab -001020A , >>> >>> holder attachment, 50 mm 07mab -py3010a and >>> >>> Socket, 19mm 07jaa-001020a >>> >>> Can you tell me where I can find these tools otherthan at Honda? >>> >>> >>> >>> tks >>> >>> >>> >> Look over http://tegger.com/hondafaq/cranktool/index.html (and the next >> section about getting the belt on right!) >> >> The socket is a normal 19 mm socket, but be aware the job is much easier >> with an impact driver, and that requires an impact socket (black). With >> the holder, a long breaker bar and a lot of manly muscles the bolt can be >> broken loose, but your manly muscles will be sore when you finish. >> >> Mike >> >> >> > I should mention - if you can get ahold of an impact driver and socket > (like by renting them) you won't need the holder. This is a case of > "bigger is better" on the driver, though; 400 ft-lbs is about the minimum. > I used a 500 ft-lb pneumatic driver with the regulator right at the tool > when we did my son's Acura, and it struggled a bit. > > Don't listen to anybody who tries to tell you the bolt can be loosened by > putting the handle of a socket wrench on a jackstand and hitting the > starter. The engine turns the wrong way 8^O > > Mike again > > |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
thank you. My problem is finding the tools i listed. Can anyone tell me
where i can find the TOOLS; other than at Honda? Holder handle 07jab -001020A , holder attachment, 50 mm 07mab -py3010a and Socket, 19mm 07jaa-001020a "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message news:lZCdneQm7O7nqbHbnZ2dnUVZ_t2tnZ2d@sedona.net.. . > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... >> "Zeek" <cedricbmason@comcast.net> wrote in message >> news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >>> It's time to change my Timing Belt on a 95 honda accord v6...I need >>> >>> Holder handle 07jab -001020A , >>> >>> holder attachment, 50 mm 07mab -py3010a and >>> >>> Socket, 19mm 07jaa-001020a >>> >>> Can you tell me where I can find these tools otherthan at Honda? >>> >>> >>> >>> tks >>> >>> >>> >> Look over http://tegger.com/hondafaq/cranktool/index.html (and the next >> section about getting the belt on right!) >> >> The socket is a normal 19 mm socket, but be aware the job is much easier >> with an impact driver, and that requires an impact socket (black). With >> the holder, a long breaker bar and a lot of manly muscles the bolt can be >> broken loose, but your manly muscles will be sore when you finish. >> >> Mike >> >> >> > I should mention - if you can get ahold of an impact driver and socket > (like by renting them) you won't need the holder. This is a case of > "bigger is better" on the driver, though; 400 ft-lbs is about the minimum. > I used a 500 ft-lb pneumatic driver with the regulator right at the tool > when we did my son's Acura, and it struggled a bit. > > Don't listen to anybody who tries to tell you the bolt can be loosened by > putting the handle of a socket wrench on a jackstand and hitting the > starter. The engine turns the wrong way 8^O > > Mike again > > |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in message
news:PP-dnSrK_O-M9rHbnZ2dnUVZ_uygnZ2d@comcast.com... > thank you. My problem is finding the tools i listed. Can anyone tell me > where i can find the TOOLS; other than at Honda? > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a > The socket is generic (any tool or automotive shop), while the holding parts are in a link from the other one: http://tegger.com/hondafaq/cranktool/index.html#hex The third part, used with any of the aftermarket parts, is a generic 1/2 inch socket handle - the longer the better. > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:lZCdneQm7O7nqbHbnZ2dnUVZ_t2tnZ2d@sedona.net.. . >> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message >> news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... >>> "Zeek" <cedricbmason@comcast.net> wrote in message >>> news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >>>> It's time to change my Timing Belt on a 95 honda accord v6...I need >>>> >>>> Holder handle 07jab -001020A , >>>> >>>> holder attachment, 50 mm 07mab -py3010a and >>>> >>>> Socket, 19mm 07jaa-001020a >>>> >>>> Can you tell me where I can find these tools otherthan at Honda? >>>> >>>> >>>> >>>> tks >>>> >>>> >>>> >>> Look over http://tegger.com/hondafaq/cranktool/index.html (and the next >>> section about getting the belt on right!) >>> >>> The socket is a normal 19 mm socket, but be aware the job is much easier >>> with an impact driver, and that requires an impact socket (black). With >>> the holder, a long breaker bar and a lot of manly muscles the bolt can >>> be broken loose, but your manly muscles will be sore when you finish. >>> >>> Mike >>> >>> >>> >> I should mention - if you can get ahold of an impact driver and socket >> (like by renting them) you won't need the holder. This is a case of >> "bigger is better" on the driver, though; 400 ft-lbs is about the >> minimum. I used a 500 ft-lb pneumatic driver with the regulator right at >> the tool when we did my son's Acura, and it struggled a bit. >> >> Don't listen to anybody who tries to tell you the bolt can be loosened by >> putting the handle of a socket wrench on a jackstand and hitting the >> starter. The engine turns the wrong way 8^O >> >> Mike again >> >> > > > |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in message
news:PP-dnSrK_O-M9rHbnZ2dnUVZ_uygnZ2d@comcast.com... > thank you. My problem is finding the tools i listed. Can anyone tell me > where i can find the TOOLS; other than at Honda? > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a > The socket is generic (any tool or automotive shop), while the holding parts are in a link from the other one: http://tegger.com/hondafaq/cranktool/index.html#hex The third part, used with any of the aftermarket parts, is a generic 1/2 inch socket handle - the longer the better. > "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message > news:lZCdneQm7O7nqbHbnZ2dnUVZ_t2tnZ2d@sedona.net.. . >> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in message >> news:zpWdnZdAGNDPs7HbnZ2dnUVZ_v-tnZ2d@sedona.net... >>> "Zeek" <cedricbmason@comcast.net> wrote in message >>> news:XJ6dnb_Q9MM2irHbnZ2dnUVZ_s-rnZ2d@comcast.com... >>>> It's time to change my Timing Belt on a 95 honda accord v6...I need >>>> >>>> Holder handle 07jab -001020A , >>>> >>>> holder attachment, 50 mm 07mab -py3010a and >>>> >>>> Socket, 19mm 07jaa-001020a >>>> >>>> Can you tell me where I can find these tools otherthan at Honda? >>>> >>>> >>>> >>>> tks >>>> >>>> >>>> >>> Look over http://tegger.com/hondafaq/cranktool/index.html (and the next >>> section about getting the belt on right!) >>> >>> The socket is a normal 19 mm socket, but be aware the job is much easier >>> with an impact driver, and that requires an impact socket (black). With >>> the holder, a long breaker bar and a lot of manly muscles the bolt can >>> be broken loose, but your manly muscles will be sore when you finish. >>> >>> Mike >>> >>> >>> >> I should mention - if you can get ahold of an impact driver and socket >> (like by renting them) you won't need the holder. This is a case of >> "bigger is better" on the driver, though; 400 ft-lbs is about the >> minimum. I used a 500 ft-lb pneumatic driver with the regulator right at >> the tool when we did my son's Acura, and it struggled a bit. >> >> Don't listen to anybody who tries to tell you the bolt can be loosened by >> putting the handle of a socket wrench on a jackstand and hitting the >> starter. The engine turns the wrong way 8^O >> >> Mike again >> >> > > > |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in
news:PP-dnSrK_O-M9rHbnZ2dnUVZ_uygnZ2d@comcast.com: > thank you. My problem is finding the tools i listed. Can anyone tell > me where i can find the TOOLS; other than at Honda? > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a You don't need any of that stuff. Rent a DeWalt electric impact wrench from any industrial rental place for about $25 per day. This thing will spinn the bolt off with so little effort you'll think you're in paradise. The black 19mm deep socket can be had at any hardware store for about $10. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Zeek" <cedricbmason@comcast.net> wrote in
news:PP-dnSrK_O-M9rHbnZ2dnUVZ_uygnZ2d@comcast.com: > thank you. My problem is finding the tools i listed. Can anyone tell > me where i can find the TOOLS; other than at Honda? > > Holder handle 07jab -001020A , > > holder attachment, 50 mm 07mab -py3010a and > > Socket, 19mm 07jaa-001020a You don't need any of that stuff. Rent a DeWalt electric impact wrench from any industrial rental place for about $25 per day. This thing will spinn the bolt off with so little effort you'll think you're in paradise. The black 19mm deep socket can be had at any hardware store for about $10. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
Michael Pardee wrote: snip > > Don't listen to anybody who tries to tell you the bolt can be loosened by > putting the handle of a socket wrench on a jackstand and hitting the > starter. The engine turns the wrong way 8^O > > Mike again > > Awwww, you just don't want to see him flip the car over on its back! <G> JT |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
Michael Pardee wrote: snip > > Don't listen to anybody who tries to tell you the bolt can be loosened by > putting the handle of a socket wrench on a jackstand and hitting the > starter. The engine turns the wrong way 8^O > > Mike again > > Awwww, you just don't want to see him flip the car over on its back! <G> JT |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Grumpy AuContraire" <Grumpy@ExtraGrumpyville.com> wrote in message news:ij3Xh.70489$VU4.26659@bgtnsc05-news.ops.worldnet.att.net... > > > Michael Pardee wrote: > > > > snip > > > >> >> Don't listen to anybody who tries to tell you the bolt can be loosened by >> putting the handle of a socket wrench on a jackstand and hitting the >> starter. The engine turns the wrong way 8^O >> >> Mike again > > > > Awwww, you just don't want to see him flip the car over on its back! > > <G> > > > JT > > > I only tried that once, on an old Toyota. It scared the bejeebers out of me - for some odd reason I didn't expect the front of the car to rise several inches when I bumped the starter. And that was a succesful operation.... Mike |
Re: It's time to change my Timing Belt on a 95 honda accord v6...
"Grumpy AuContraire" <Grumpy@ExtraGrumpyville.com> wrote in message news:ij3Xh.70489$VU4.26659@bgtnsc05-news.ops.worldnet.att.net... > > > Michael Pardee wrote: > > > > snip > > > >> >> Don't listen to anybody who tries to tell you the bolt can be loosened by >> putting the handle of a socket wrench on a jackstand and hitting the >> starter. The engine turns the wrong way 8^O >> >> Mike again > > > > Awwww, you just don't want to see him flip the car over on its back! > > <G> > > > JT > > > I only tried that once, on an old Toyota. It scared the bejeebers out of me - for some odd reason I didn't expect the front of the car to rise several inches when I bumped the starter. And that was a succesful operation.... Mike |
All times are GMT -4. The time now is 04:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands